Question about Jamo DMR 60 DVD Player/Receiver

2 Answers

USB problem When I insert my USB (ZAP flash disk 4 GB), nothing happen and I can't do anything until it is removed. When inserting my old 1G Creative mp3 player it works fine. Any idea?

Posted by on

2 Answers

I believe the DMR60 usb input may only supports FAT based formats. FAT limit is 4GB. What is the format of your flash drive? It may be failing to read the format and can't initialize and thus looks like it hangs until you remove it. Probably your mp3 player is FAT based and thus works.

Posted on Apr 14, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 105 Answers

It seems the DVD player is not recognizing 4GB flash disk. I have checked and I can't see that there is a firmware update for this model though I can see one for the DMR 50. Try contacting Jamo support


If you have another usb lead or a lead that can collect two usb sockets to the flash disk you may find this works as there is more 5 volts power available from two sockets.

We depend on you rating solutions - I hope this is useful.

Posted on Mar 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove a disc stuck in the tray?


1)See if there is a small hole at right or left side of disk inserting button.
2)Take a small pin and insert it into that hole untill it goes inside then your disk tray will open and now remove the disk.

May 15, 2015 | RCA Rtd3131 Component Dvd Players

2 Answers

Toshiba DVD player


Hi,

Does this happen with all discs? What disc are you inserting that gives this error? DVD?

Feb 05, 2008 | DVD & Blu-Ray Players

1 Answer

When I insert disk it says no disc and when I go to select movie it gives the option of USB or player but when I select it nothing happens no response This is a recent problem player has worked for some...


It sounds like the laser is either out of alignment, dirty, or unable to read the disc for one reason or another. Have you tried a DVD and a BluRay disc or only BluRay? What kind of player is it

Feb 20, 2015 | DVD & Blu-Ray Players

1 Answer

Player says update may be needed


You can try completing the update. This is how it is done:

The update file can be found here http://www.sharpusa.com/CustomerSupport/ProductDownloads.aspx

Select bluray disc players
model not listed
type in model number
Then click on search
Click on the instructions and read thme if you need to. If you do not need to read the instructions click on the firmware and save it to your desktop. After the download has completed open the folder and click on extract all files under folder tasks, which should be on the left of the window nearer to the top.

At this time insert a 1, 2 or 4 GB flash drive into your computer. Then in the window click on next if you need to or browse and then my computer and then the icon of the usb device itself. Click on extract or next. When it is done safely remove the usb device from your computer by clicking on safely remove hardware located near the time on the bottom right hand side of the computer monitor.
Click on the usb device and click on stop. Remove it from the computer and place it in the back of the bluray player. Turn the tv and bluray player on as if you were going to view a bluray. There shouldn't be any discs inside. Press the setup button on the bluray remote control. Choose settings. Choose software update. Begin the update. After it is completed turn off the bluray player before removing the usb device.

If the usb device needs to be reformatted or if the zip file folder is placed on the usb device instead of the extracted file the download will not be successful.

May 08, 2010 | Sharp AQUOS Blu-ray Disc Player

1 Answer

Disc inserted upside down now dvd player won't


Ur disk is not readable to the laser eye.
That why u can't open the disk tray.
Must take it aparts to take out the disk.
U just hope the laser eye not damage.

Aug 17, 2009 | Apex Digital AD-1100 DVD Player

1 Answer

Disk tray wont stay closed.


I am having the same problem with panasonic Karaoke player, it wont play anything cause the drawer wont stay closed!!! HELP!!!

May 05, 2009 | DVD & Blu-Ray Players

1 Answer

Recorder self-check... after inserting a disc.


Inserting a disk OTHER than Panasonic will cause a system crash. I'm betting Panasonic has code that causes this so you don't use cheaper generic DVDs. I now have to mail order the Panasonic DVDs (since nobody carries them) and have never had a crash since!

Jan 30, 2009 | Panasonic DMR-E85H DVD Recorder

2 Answers

Cant play anything on it


I had the same problem, After googling for a few minutes I found the reset procedure for this player.

1. Turn it on.
2. Eject any disk you have in there and close the tray.
3. Hold down the "STOP" button on the player (not remote) until the green light flashes red and the system reboots.
4. Insert disk and enjoy.

This worked for me... mileage may vary.

Aug 29, 2007 | Cyberhome CH-DVD 300 DVD Player

Not finding what you are looking for?
Jamo DMR 60 DVD Player/Receiver Logo

Related Topics:

631 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jamo DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96708 Answers

The Knight
The Knight

Level 3 Expert

68408 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Jamo DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...