Question about Office Equipment & Supplies

1 Answer

VPL-fx51 Sony projector "Please replace the lamp"

I need to know what to do to get the "please replace the lamp" image off of the screen. The bulb has been replaced. I know sometimes there is some type of code to push after you change a bulb to get this off of the screeen.

Posted by on

  • richieb18 Apr 06, 2008

    Lamp timer has reached its 2000hr mark and new bulb has been inserted but cant reset the timer. tried pressing left and right then manu but it just seems to bring up the menu screen!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 563 Answers

Hi there

It is quite easy to reset the lamp timer nd remove the prompt.

Start up the Projector and hold down the right and left scroll buttons on your remote and then press Menu.

This will reset the timer.

Posted on Mar 26, 2008

  • G. Smith Jul 19, 2012

    This did not work on my unit.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Sony Projector XGA VPL FX51 and the COVER LAMP LED is Blinking. Please Guide me to solve it?


check that the cover is secured properly and the little switch inside the init is activated by the plastic protusion on the inside of the cover, when installed correctly

Apr 06, 2011 | Sony VPL-FX51 Multimedia Projector

1 Answer

How can i reset the lamp timer ???? Typ of beamer: Sony VPL-FX51 E-Mail:francois.humbert-prince@vtg.admin.ch


Connect with power cord and turn the projector to the standby mode.
Press the following keys on the control panel in the following order for less than in five seconds each: RESET, LEFT arrow key and RIGHT arrow key and then ENTER.(showing in the picture below)
(NOTE projector must be in standby mode and keys pressed less than five seconds)
now press power/standby key to ON the projector and check lamp hoursgood_help_1.png

Jan 31, 2011 | Sony VPL-FX51 Multimedia Projector

1 Answer

I have changed the bulb on my Sony VPL-HS50 video projector and the image is now in black and white. I folloewd the instructions in the manual word for word. The bulb is a Sony genuine part


Is the buld u changed right and in working condition.please clean the optic lens and image CRT board which ( Scanner image board) to see if the issue remaisn or nott

Sep 28, 2010 | Sony VPL-HS51A / VPL-HS60 Multimedia...

1 Answer

I replaces my bulb in the sony vpl-hs10 and it still will not turn on after I reset it what do I do now? the lamp light is still lite it turns on but the lamp does not project anything


These instructions are for a Sony Cineza VPL HS3, but may be the same for the HS3.
1st thing to check - is the cover properly/completely closed - this can stop the projector from working.
Connect the power and set the projector to standby mode.
Press these buttons on the remote control in this order, for less than 5 seconds each.
Reset - Left Arrow - Right Arrow - Enter

This is required, to reset the lamp timer.

Also, something I found interesting from the internet - lamp life isn't when the bulb dies, but when a bulb has lost 10% of its brightness - so you might well be able to reset the timer and get much more use from the bulb - the image just wont be as bright.

Nov 19, 2009 | Sony Cineza VPL HS2 Multimedia Projector

1 Answer

Holding left and right scroll while powering on and pressing menu did not reset lamp timer.


Set the projector in standby mode. Press the reset and enter buttons for about 5 seconds. That should reset the timer.---Rick

Sep 01, 2009 | Sony VPL-FX51 Multimedia Projector

1 Answer

Sony vpl-hs20 cineza projector- reset lamp counter


These instructions are for a Sony Cineza VPL HS3, but may be the same for the HS3.
1st thing to check - is the cover properly/completely closed - this can stop the projector from working.
Connect the power and set the projector to standby mode.
Press these buttons on the remote control in this order, for less than 5 seconds each.
Reset - Left Arrow - Right Arrow - Enter

This is required, to reset the lamp timer.

Also, something I found interesting from the internet - lamp life isn't when the bulb dies, but when a bulb has lost 10% of its brightness - so you might well be able to reset the timer and get much more use from the bulb - the image just wont be as bright.

Jul 19, 2009 | Sony VPL-HS20 Multimedia Projector

1 Answer

LMP-H150 reset hours on sony cineza VPL-HS2


These instructions are for a Sony Cineza VPL HS3, but may be the same for the HS2
1st thing to check - is the cover properly/completely closed - this can stop the projector from working.
Connect the power and set the projector to standby mode.
Press these buttons on the remote control in this order, for less than 5 seconds each.
Reset - Left Arrow - Right Arrow - Enter

This is required, to reset the lamp timer.

Also, something I found interesting from the internet - lamp life isn't when the bulb dies, but when a bulb has lost 10% of its brightness - so you might well be able to reset the timer and get much more use from the bulb - the image just wont be as bright.

Jul 04, 2009 | Sony Cineza VPL HS2 Multimedia Projector

1 Answer

Sony cineza vpl hs51 projector won't project


Something I found interesting from the internet - lamp life isn't when the bulb dies, but when a bulb has lost 10% of its brightness - so you might well be able to reset the timer and get much more use from the bulb - the image just wont be as bright.

The lamp may not have been changed - just the timer reset - How many hours has the lamp really done - 1000, 3000, 5000?
If you know that the hours are genuine, then was the quartz bulb contaminated with a touch of oil from skin contact?
This will substantially shorten lamp life, due to the quartz going milky and opaque.
The easiest way to check, is to pull the lamp and have a look at the bulb.

If need be replace the lamp and reset the lamp timer.

These instructions are for a Sony Cineza VPL HS3, but may be the same for the HS51
1st thing to check - is the cover properly/completely closed - this can stop the projector from working.
Connect the power and set the projector to standby mode.
Press these buttons on the remote control in this order, for less than 5 seconds each.
Reset - Left Arrow - Right Arrow - Enter

Dec 07, 2008 | Sony Projector Lamp for VPL-HS51

1 Answer

Sony VPL-ES3


What documents you need for VPL-ES3, let me know please.
Have you replaced Lamp? give details of projector problem to find out solutons.

Sep 12, 2008 | Sony LMP-H150 Projector Lamp Projector...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

1,898 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...