Question about Hitachi 50V720 Television

1 Answer

How do I know if it's a bulb or balist problem

How do I know if it's a bulb or ballist problem with my 50v720? Bulb looks some what cloudy.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 3,866 Answers

You need to test the ballast transformer and most cases here a enduser will not be able to do this without special equipment. there is also a sensor on the ballast that detects heat from lamp ect ect that cause this error with a light on the frount of the set. I would sya get a estimate on it they will tell you witch it is. there is not way to tell unless you check it and i am not there to do that. Again a estimate would be the right way to go about this.

thanks and please do leave ratings and feedback for your free answer today.

Posted on Apr 28, 2010

Testimonial: "thanks"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bulb won't turn back on. 2 week old bulb


I could be the ballist. Or you have a bad lamp if you buy cheap you get cheap

Jun 25, 2016 | Televison & Video

1 Answer

Need to get to balist on home does bottom of bed open home tanning bed 1985 sunbrella aruba 10 sontegra 12165


Have you checked to see if the very end cap of the bed qill come off accessing you to the underside of the bulbs? I would look at that and see.

Mar 07, 2016 | Health & Beauty

1 Answer

Dark picture after changing bulb


If not bright again and not a generic bulb-possible problem with the lamp ballast that powers the lamp.

Nov 05, 2012 | Hitachi Televison & Video

1 Answer

No picture and buzzing sound on Sony XBR Wega


Is the bulb light flashing ? - Sony's bulb light is very accurate in telling you if the bulb is bad. The buzzing sound could be from the balist trying to strike the lamp. You also may want to open the lamp door and see if the bulb is shattered.

Aug 01, 2009 | Sony Grand WEGA KF60XBR800 60" Rear...

1 Answer

How do I change the bulb in my 50V720


Regarding your modle number, you tv part number is UX21517, so here's a video and picture guide of how to replace it.. .
http://guides.fixyourdlp.com/hitachi/UX21517.php

Jul 16, 2009 | Hitachi Televison & Video

1 Answer

TV won't come on


It is the balister not the lamp. Very common problem that Panasonic will not address. Costs over $600 to repair. file a complaint with consumer affairs please.

http://www.consumeraffairs.com/php/a_report.php

Jun 16, 2009 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

96 inch fluorescent light only one bulb will burn have changed bulbs and balist


If it is wired correctly,the only thng left is the tomestones, the contacts that the bulb connects to. Try this ;switch the two wires from the one bulb at the ballast to the other bulb on the ballast. If the other bulb now lights then the new ballast is bad and need to be exchanged.

Dec 29, 2008 | Garden

2 Answers

My hitachi 50v720 bulb blew and the replacement doesn't fit


I believe the lamp you need is the UX21516. not the 21517
I have a 50VF820 and this is the lamp for it.
By the way my unit just hit the 3 years and the lamp just blew as well.

Dec 14, 2008 | Hitachi 50V720 Television

1 Answer

Hitachi 50v720


You need to remove the front panel of the TV. If you look at the picture above, this panel is the light gray piece on the bottom of the tv. It is attached with plactic connectors. Just poo it off and then you will see a metal panel with some screws. remove the panel and then you will see the light buld casing. Pull it out and replace it with the new light bulb casing. If you did not purchase a new light bulb casing and bought just the bulb, you will need to take the casing apart and replace the bulb. Make sure to mark the wires so you will know where they should be connect to the new bulb.

Nov 05, 2008 | Hitachi 50V720 Television

Not finding what you are looking for?
Hitachi 50V720 Television Logo

Related Topics:

546 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74118 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...