Question about Acer Aspire 4720 Notebook

2 Answers

Regarding wb cam

Sir my web cam is not working as i installed my all drivers

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My (administrator) account keeps refresshing and I can't work in any documents nor access the internet quickly enough

Posted on Aug 27, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Acer Master
  • 4,924 Answers

Look for it in the device manager and see if it is installed ...To get there click right on my computer ...properties/ hardware / device manager ...
here you should locate it by name or by video camer a...and if it is in yellow with a sign on it ...this means that it is not installed..and you have to see what is the reason ...Either the driver is not compatible with the operation system ..or you do not installed it ..or you did something during install...probably it pop-ed up for installation when it was discovered by windows and you canceled the installation cause you had other priorities..
so in this case insert the disk again ...open the disk by explore it (right click on disk icon) ...locate the driver for the camera and in accord with the operation system you are using ...and start the install from the installer application ...Run it all the way even if windows will say at dome moment that the driver is not digitally signed or something lik ethat ...click install anyway..
after that restart the laptop...if the camera it is enabled...and has no other issues this will have to make it work ...probably windows will find it ..and start a wizard to install it again ...run it automatically and it will announce you that the device is installed and ready to use..
If the camera is nowhere to be seen in the device manager ...and the windows it do not find it anywhere automatically..than try first to restart ..and just as the first lines written appears..pressF2 to enter Bios settings ..Here look for the feature called Optimal factory defaults ,,and enable it by selecting with the arrows for up and down ...and press enter to agree....Save all changes by pressing F10 ..and this will restart the device ..In this moment even if the camera was disabled ..windows will find it and install it automatically cause the driver is already installed,,,if it doesn't It means the camera is dead..

Posted on Apr 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have installed the driver for my trust wb-1400t-02 i have picture but no sound


Hi

For downloading the driver for Web cam click hear and enter the image work and click the download file.
After download the driver go to downloaded folder and click the setup.exe and install the driver after reboot you computer, after rebooting plug on you webcam and enjoy

If my solution is solve make you happy give the four thumb

Cheer

Jun 26, 2011 | Trust WB-1400T Webcam

1 Answer

I have a vebcamera but i dont know how to install bacause i have not a instalation disc


I researched your question and you can download the drivers you need to make your web cam operate. This is the Trust official site so you are getting the correct drivers you need. Below is the link you will need to take you there.Either click on the link or copy and paste it in to your web browser then download the drivers you need for the operating system you have here is the link.

http://www.trust.com/products/productdrivers.aspx?artnr=15355

I would suggest you unplug the web cam from your computer first, then down load the drivers and install them then if your prompted too plug your web cam back in again. If your not prompted to plug in your web cam wait until the drivers install. Then plug your web cam in a message will pop up saying a new device or drivers are being installed. Once this completes reboot (restart) your computer and you should now be able to use your web cam again.

I hope this helps you out, if it does please leave a YES that I did help you out. Thank you.

Apr 06, 2011 | Trust Webcam Live WB-6250X

1 Answer

I needed sofware to install my web cam


1st You download Webcam Driver. Free Logitech Cam Driver After this install the Webcam driver in the system.
Installation of Webcam Driver
  • Go to the control panel
  • Click on the System Icon
  • Click on the Hardware Tab
  • Click on the Device Manager then
  • Select the Unknown Device or printer device where yellow Question Marks sign on it.
  • Right click on it and uninstall it.
  • After this go to the top of the device manager and click on scan for hardware changes.
  • Driver installation Wizard start.
  • Brows Your Driver from the Hard Disk and click on next.
  • Driver will be install.

Apr 20, 2010 | Logitech Quickcam Chat Webcam

1 Answer

How do I install a Trust WB-5400 webcam on the latest Ubuntu?


If you have the trust CD with the driver run from CD,if not find the driver for your trust cam on trust's web site.

Dec 20, 2009 | Trust Wb-5400 Personal Web Camera

4 Answers

I need cif single chip


I had the same problem too and tried all kinda solution I cud find on the net for ages... The solution is simple...but windows dont give the exact problem description.
Infact...in Device manager, u miss a category called "Imaging device".To get that section back and put ur cam to work download the file "sti_ci.dll" from here.
Extract it, and copy the file to "C:\Windows\System32\" folder and connect back ur cam.Yo get get windows saying device is installed and ready to use. That worked for me. If it worked for u, please post it on other forms to help people who r still trying to look for a solution.

May 11, 2009 | Trust WB-1400T Webcam

1 Answer

Genius web cam driver cd


GOTO THIS WEB SIGHT AND CHECK FOR THE DRIVERS YOU NEED AFTER DOWN LOADING THEM TRY YOUR WEB CAM IF IT DONT WORK THEN TRY RE-STARTING YOUR COMP WITH THE WEB CAM PLUGED IN AFTER DOWNLOADING THE DRIVERS
http://www.nodevice.com/driver/company/Genius/PC_Camera.html

Mar 09, 2009 | Genius VideoCAM Messenger Webcam

5 Answers

QHM500LM USB PC CAMERA DRIVER SETUP NEEDED QUANTUM... how can i install webcam drivers QHM 500-LM


i have no software quantum qhm500lm usb web cam.driver. plzzzz help how can play my web cam. plzzz guide me

Nov 16, 2008 | Creative Labs WebCam Live!

1 Answer

Trust web cam wb-1400t


driver here: http://www.trust.com/products/product.aspx?artnr=14382&cxt=drivers

Oct 16, 2008 | Trust SpaceCam 150 Webcam

4 Answers

WB-1400T


i want to instal trust web cam wb-1400T i have lost my cd..can you send to me the instalation file ?

Feb 10, 2008 | Trust SpaceCam 100 Webcam

7 Answers

Web cam driver


Ma'am,
We need more details regarding your web cam... Please specify the brand and model number, so we could help you with the problem....
I'll get back later...

Feb 02, 2008 | Creative Labs Live! Cam Notebook Pro...

Not finding what you are looking for?
Acer Aspire 4720 Notebook Logo

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

635 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...