Question about InFocus LP 530 Multimedia Projector

2 Answers

Turn on, green after a few seconds it shuts down, and blinks ....

Orange...what would be the problem

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

Because of heat and high voltage concerns, these projectors contain many protection circuits. During powerup, the circuits are "tested" for proper operation and certain conditions must exist or hte unit will power down. A blown lamp will not cause the unit to shutdown. It is rare for a ballast to cause this as well. I would be looking at the power supply module first. If the unit was performing OK prior to this powerup failure, I would suspect the power supply.

Dan

Posted on Apr 28, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,866 Answers

This would be the bulb or the ballast that powers the bulb ether witch will need to be fixed. I would take it to a local shop to have it looked at.

please be considerate and rate and leave feedback for your free answer.

Posted on Apr 28, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Projector screen turns off after 10-20 seconds

Is the projector receiving a source signal? if not it will power itself down after whatever time you have it set to do so when no signal is present.
Just an idea?

Posted on Jan 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Visio on front blinks orange and white with black screen


The tv is powering down when flashing. Hold the power button down for thirty seconds, this will shut the power down completely. \do this after you unplug it. than plug it back in. it will still blink but only for a few seconds then you should be able to turn the tv on

Jul 27, 2012 | Vizio M470NV 47 in. LCD HDTV

1 Answer

Mitsubishi WS-65908 will not stay on


Its a color convergence problem from description:

If green light comes on for a few seconds and goes off:

On the front of the set (not the remote) press and hold both the menu and input (device) buttons at the same time for at least 5 seconds and release both.

Watch power light: it will blink a two digit error code, in your case I suspect it will be 2 blinks, 2 blinks and repeat several times.

Let me know error code and I will help.

Apr 16, 2012 | Televison & Video

1 Answer

How do i clear an error 5100 from my canon pixma mp250?


Try this technique. Turn off printer. Hold down Stop/Reset button with one hand and turn printer on with other hand. After green light comes on for the ON button, press the Stop/Reset button two times and you should see the green light blink off and the orange alarm light blink "on" with the first press and then the green light comes back on for the power button and the orange light goes off with the second press (if you did it correctly). Now, you need to hold down the ON button about five seconds, then let go to shut OFF the printer. When you turn it back on, the printer should be back to the factory original condition. Make sure you set all your printer properties the way you want them again from your printer properties dialog boxes because some of the settings may have been stored in the printer's EEPROM, which you just reset to get rid of the offending alarm code.

Jan 14, 2011 | Canon Pixma Mp250 Allinone Inkjet Photo...

1 Answer

My computer turns on, the green light is on and the orange light is blinking but screen doesn't show anything


I may be in low-power mode. Try jiggling the mouse, pushing enter on the keyboard a couple times and just pushing the power button once.

If none of those work push and HOLD down the power button for about 10 seconds and the computer should shut off.

As an absolute last resort pull the power plug, leave it out a few seconds then plug it back in and power it on.

One of these methods should at least get the screen back up.

Jun 07, 2010 | Smart Modular SV3170A

2 Answers

Projector screen turns off after 10-20 seconds


Is the projector receiving a source signal? if not it will power itself down after whatever time you have it set to do so when no signal is present.
Just an idea?

Jan 03, 2010 | NEC NP-1000 Projector

1 Answer

Light engine


hold menu and input or device button at same time for 5sec. Let me know what blinking code you get. 3-2 6-1 etc.

May 25, 2009 | Mitsubishi WD-62531 Projection Television

1 Answer

No picture sound is fine


tv comes on then turns blue at that time it shuts down. The power is on and then it blinks 5 times!!!

Apr 27, 2008 | Sony KP-65WS500 65" Rear Projection...

2 Answers

Lamp will not come on


try pressing and holding the enter button on the projector for about 30 seconds - this resets it. It worked for me!!

Feb 10, 2008 | NEC VT460 Multimedia Projector

4 Answers

Green/orange flahing light on IPod and no music.


From Apple.com Support Website. If the front status light on your iPod shuffle blinks orange and green when you press any button, then your iPod shuffle is experiencing some type of error. Try these troubleshooting steps to resolve the problem. To troubleshoot the iPod shuffle error light: 1. Turn off your iPod shuffle 2. Wait a few seconds 3. Turn your iPod shuffle back on again If this does not resolve the problem: 1. Check to make sure there are songs on your iPod shuffle 2. Use iTunes to add songs to iPod shuffle and try again If your iPod shuffle continues to display a blinking orange and green light, use iPod Updater 2005-02-11 or later to restore iPod shuffle, and then add songs with iTunes. If your iPod shuffle still shows a blinking orange and green light after trying all of the above steps, your iPod shuffle may need service. Best of Luck.

Sep 11, 2007 | Apple iPod shuffle MP3 Player

Not finding what you are looking for?
InFocus LP 530 Multimedia Projector Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Office Equipment & Supplies Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Are you an InFocus Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...