Belkin 54G Wirless Router PRoblem

you log into the router via an Ethernet connection, and go into security, generate your "Key" and save it to a notepad document, then save the configuration, and exit. now at the "Client" PC, when you try to "Access" the SSID, network, you will be asked for the "Key" copy paste the key saved on a USB flash drive, or written down, and you should now be able to connect. manual and support at link below. Manual gas a step by step "how to" http://www.belkin.com/ca/support/product/?lid=enc&pid=F5D7230-4&scid=221

For that Connect your router to computer with ethernet cable then you can access it with following default link.

For belkin router http://192.168.15.1
or
http://192.168.2.1

If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.

Thanks for using FixYa.

Open the Router Setup by typing 192.168.2.1 on the address bar of Internet Explorer

On the Left Hand side Under internet wan Click DNS

Uncheck the option Automatic From ISP

Type the Following DNS Addresses there

4.2.2.2 , 4.2.2.3

If it is not working you may need to upgrade the firmware of the Router from www.belkin.com/support

If you can access the configuration page of your belkin router you have to copy the MAC address of your computer to the router. The router has the capability to clone the MAC address. It's because if you have a cable internet connection the MAC address is registered in the server.

well first off you should plug a cat 5 cable into the router, login into the router and see what the ssid is and change it to your own so you know which one you are logging into, then check the security settings if it says none then you are not secured

go to router configuration page in that wirless is there option in that seciurty option is there then give the wep or wpa option then give the password then save it re-try it to connect

Try geting a routher that featres wirless and eathernet so you do not have to have two boxes. You will have to know its ip adress enter it internet explore and then you will be able to protect it through there.

Of course you've clicked "refresh" wireless network list? Go to the working computer and in a DOS box type IPCONFIG /ALL to find the gateway address for the router. ( Or refer to your wireless connection utility ). I will probably be 192.168.0.1 for example. In your browser address line put HTTP://192.168.0.1 and click the arrow. You should be talking to the router now, default id and/or password is typically ADMIN. Go to wireless settings and make sure SSID broadcast is turned on. Also note the SSID name, encryption type ( WEP, WPA, etc ) and note the key, if any. You now have enough information to connect the second computer. Yeah, this is complicated. If it's more than you want to know best get a friend to help you, though I may be able to answer specific questions once you get into it.

try opening your internet explorer and typing in 192.168.1.1 or 0.1 see if that opens up your router on your screen you may have a password try administrator this should give you access to your setup

Did the router assign an IP to your MacBook? Do you use security/encryption on your MacBook?