Question about Dell 1704FPTt 17" TFT LCD Flat Panel Monitor

1 Answer

No Power LED and Nothing on the screen

I checked everything and nothing seems to be working, but everything else works on my computer

Posted by on

1 Answer

Check your power supply to your screen cause it should at least show a amber light at the screen to show that there is power but no proper signal from the computer.

So below are step to check the power supply to your monitor. Assuming if you use a different monitor on your pc it works

1. Check your fuse both internal and external
2. check if power is receipted by the LCD

Posted on Mar 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Display not working, power button LED turns on blue for 1 second and won't turn on again


Have you tried checking with another monitor. Meaning that if the second monitor does not come on then the problem is with your computers mother board. But if the monitor other monitor you check it with comes on then of course it is your monitor.

Jun 12, 2016 | Acer 22" X223w LCD Monitor

1 Answer

Dell ST2210 suddenly will not power on. Tried different power cord, outlet, unplugging everything but the power cord and still nothing.


If your LCD TV or monitor has stopped working, or is displaying one of the following symptoms, then it's a candidate for some new capacitors
- Flickering screen
- Screen image disappears after several seconds
- Dim screen
- Slow start
- Power LED on, but no picture
- Unusual colors and/or lines
The primary cause of LCD TV and monitor failure is caused by faulty capacitors. You can examine the capacitors in your LCD TV or monitor and actually see if they are bad.
If they appear bulged on top, then they need to be replaced.
New capacitors will solve a host of problems in LCD monitors and TV's and will extend the life of your monitor or TV by several years.
Check the cables, connectors and connections.
Take it to a repair shop.

Apr 21, 2014 | Dell Computer Monitors

2 Answers

The monitor does not power up. no power light comes on, there is nothing that shows up on the screen. All cables are well connected and yes the power switch is on.


check by changing the power cord if this does not solve the problem the fault is in the power of the monitor better call technician or take it to the service centre

Aug 02, 2011 | Samsung SyncMaster 940UX LCD Monitor 19...

1 Answer

My monitor Dell 1703FPT will not come on and the power button does not light up either...any suggestions?


Got the same problem. Remove the front ring around the screen, to check out the actual switches. Everything seemed normal, but nothing worked... Could it be in the power supplie itself?

Mar 21, 2011 | Dell 1703FPt 17" TFT LCD Flat Panel...

1 Answer

Dell e152FPB LCD monitor backlight power problem


Check the four transistors (c5707/5706) in the inverter section for shorts, board looks like this? http://www.lcdrepair.us/e152-e153fpb-inverter-power.html

Feb 20, 2010 | Dell E152FPb 15" TFT LCD Flat Panel...

1 Answer

Gateway fpd1760 lcd monitor no power at all the blue led clicks on for 5 seconds the screen flashes for a milla second then nothing


check if the signal cable has been plugged in properly at the back of the screen and at the back of the computer.

if you have another computer or laptop,.check if the screen works fine with it.as this could even be a boot up problem with the computer

Feb 04, 2010 | Gateway FPD1760 17" LCD Monitor

1 Answer

Nothing on screen, gren and orange light flashing


You more like have bad capacitors in the power supply. Open it up and look for capacitors with bulging tops. http://en.wikipedia.org/wiki/Capacitor_plague
Common problems fro 2~3 years old monitors/ TV.

Jan 03, 2010 | Acer AL1916W 19" WideScreen LCD Monitor

2 Answers

The screen is black even though the green light is on


try with another cable, pc if nothing. need to get service.

May 30, 2009 | ViewSonic VA1912wb 19" LCD Monitor

1 Answer

JM777 no receiving signal from CPU


when u power up the computer press F* key then go to enable vga mode then set disaply resolutin incotrol panel to 800*600 or 1024 *768

Nov 24, 2008 | Relisys TL 766 Monitor

1 Answer

Monitor Display Problem.


The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the repair shop because you have neither the skills or equipment to repair it. By the way I am not a monitor repair man but I do have 30 plus years in the electronics field.
The second monitor may have a broken wire in the cord that goes to your computer. Other internal components can cause the same simptoms your seeing. Good luck!

Mar 28, 2008 | Polyview V17E 17" LCD Flat Panel Monitor

Not finding what you are looking for?
Dell 1704FPTt 17" TFT LCD Flat Panel Monitor Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computer Monitors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

William Miller
William Miller

Level 3 Expert

8820 Answers

Are you a Dell Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...