Question about Creative Labs I-Trigue L3800 Computer Speakers

Open Question

Creative I-Trigue L3800 2.1 Speaker System; No Sound from Speaker

I have Creative I-Trigue L3800 2.1 Speaker System, Super Great Sound when it worked. No problems at all until one day their was no sound. I go back and forth using either the Speakers or my headset...which I would plug my headset into the wired remote. I have power...the wired remote "volume control" works with lights, but no sound. I only have sound when I have my headset or another speaker plugged into the Audio phono-plug (female) connector. If I disconnect the male jack from the Audio phono jack/connector...still no sound from speakers. I think the female Audio Phone Jack/connector went bad...won't Switch/Release back to External speakers.


I am a tech with the correct tools. I attempted to fix the phono jack/connector Switch... I "did not" remove the whole switch, just the top part with the brass/plastic slider and then re-assembled it back together...still no sound from speakers. I tried it with both the top part of the switch on and off, including manually jumped the contacts...still no sound from speakers, only headset.

NOTE TO ALL OTHERS: This fix is very delicate for those who attempt this; must of jewels tools, magnifying glass w/light to try this.

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 12 Answers

SOURCE: No Sound from External Speakers....only from Headset plug.

Hi, had same problem.... unscrew the remote and carefully remove the back end part of the stereo-connector (very careful !) it consists of a very small switch which moves sideways..... this switch is stuck into headphone-modus. Reassemble and it will work again
Note that speakers will work if you remove the switch

Posted on Apr 26, 2010

Testimonial: "Super info you've given...Thanks. Was going to replace it, but your suggestion is even better. Do you have to remove the switch to remove the casing?"

Ad
bronk50
  • 27725 Answers

SOURCE: I have Creative I-Trigue L3800 Speaker System, but

if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound video and game controllers you might see a yellow question exclamation mark? ! or a red X Right click to reinstall drivers
if you dont have a disk with the drivers you will have to download them
hope it helps

Posted on Nov 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Creative I-Trigue L3800 Speaker System, but I only get a redlight, won't power up. The Power supply works. What else can I try?


if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound video and game controllers you might see a yellow question exclamation mark? ! or a red X Right click to reinstall drivers
if you dont have a disk with the drivers you will have to download them
hope it helps

Oct 05, 2011 | Creative Labs I-Trigue L3800 Computer...

2 Answers

Hello. I have a speaker system from Creative called I-Trigue 3400th I have come to uninstall the driver, so I want to hear where I can find diveren again. Thanks in advance for your help. Sincerely, Irene...


the driver you uninstall ed is for your sound card whats the model of your computer and if you know what type of sound card did you have inside. I can assist over skype remotely aryon314

Mar 01, 2011 | Creative Labs i-Trigue 3400 Computer...

1 Answer

Have an I-TRIGUE 3600 2.1 speaker for my


re-install drivers 4 audio or change settings

Jul 16, 2010 | Creative Labs Inspire T3000 Computer...

1 Answer

No Sound from External Speakers....only from Headset plug.


Hi, had same problem.... unscrew the remote and carefully remove the back end part of the stereo-connector (very careful !) it consists of a very small switch which moves sideways..... this switch is stuck into headphone-modus. Reassemble and it will work again
Note that speakers will work if you remove the switch

Apr 19, 2010 | Creative Labs I-Trigue L3800 Computer...

2 Answers

Volumn wheel has a short in it. I can't get a response from Creative. Can I purchase a new wheel? Otherwise my speakers are useless.


no creative will not sell you a replacement they want you to buy a completly new speaker system i just got a response from them about the wired volume control

Nov 30, 2009 | Creative Labs I-Trigue 2.1 3300 Computer...

2 Answers

My Creative I-Trigue L3800 speakers have stopped working. The system receives power (the volume control lights up) but I am no longer getting any sound. I fear something may have blown but not sure what. I...


don't know but i'm in the same boat. the white connector on the subwoofer does not receive sound. either the left or the right speaker will work when plugged into the red female connectors but neither works with the right. fuse is all i can think of. know where to get one?

Oct 29, 2009 | Creative Labs I-Trigue L3800 Computer...

1 Answer

How to connect Creative Itrique 3200 speaker system to my audio video receiver


You must have the phone jack to RCA cable. The phone jack will be connected to your creative labs then the RCA on your audio video receiver.

Sep 14, 2009 | Creative Labs I-Trigue 3200 Computer...

1 Answer

I-trigue 3600 No sound out of thespeakers, earphone jack is ok


I'm pretty sure the power stage is fused on these- check those first, they're mounted on the amp board inside.

Aug 12, 2009 | Creative Labs I-Trigue 3600 Computer...

1 Answer

Crackling noise


if you so a test on your speakers you will find the one speaker is doing the same you must take the unit back because the speaker is faltie

Jan 19, 2008 | Creative Labs I-Trigue 3600 Computer...

1 Answer

No Sound


Make sure you plug into the GREEN speaker port on the PC.If using a digital connection,try going back to analog.The difference is almost non-existent,and much less hassle.

Oct 21, 2007 | Creative Labs I-Trigue 2.1 3300 Computer...

Not finding what you are looking for?

Open Questions:

See all Creative Labs I-Trigue L3800 Computer Speakers Questions

Creative Labs I-Trigue L3800 Computer Speakers Logo

Related Topics:

616 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

619 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...