Question about Brother HL 5250DN Laser Printer

2 Answers

Changed toner but printer says need toner - Brother HL 5250DN Laser Printer

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 39 Answers

Sounds like you might be using a recycled cartridge, and that's okay. but the flag on the side of the toner cartridge has to be turned back. If it is a starter cartridge it will not hae the flag but one can be put in. I do all that sort of stuff. So if you have questions about getting a reset flag, talk to me.

Posted on May 31, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,041 Answers

Hi there

You need to reset the toner count after re-newing it.

Posted on Apr 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon ir 1020


I have canon printer ir 1020, when I need to change a toner the printer detect if the toner that i have putted is empty, but the toner is the new one. what is the problems/ and how to fix it?

Sep 03, 2013 | Office Equipment & Supplies

1 Answer

HL215ON changing toner How do I change the toner?


Its not very hard to replace toner cartridge on your brother laser printer. please click the link below and follow the instructions with diagram, to replace toner cartridge:---- http://technoanswers.blogspot.com/2011/06/how-to-replace-toner-cartridge-on.html ----------- this should help.thanks.helpmech,

Jun 01, 2011 | Brother HL 1240 Printer

1 Answer

I have got my samsung 4300 toner refilled,and the display shows toner exhausted .the person who got my toner recharged told me that samsung 4300 printer has some inbuilt chip,which needs to be changed...


Hi
The person refilling your toner needs to install the correct chip onto the toner cartridge. The chip stores the number of pages printer by that cartridge and is unique to each model printer, therefore an incorrect chip will not work. Good luck with that

Oct 06, 2010 | Samsung SCX-4300 Monochrome Laser...

1 Answer

Have a c1900 but no disk for utility management to change toner cartridges, how do I get around this and change toner cartridges? Drivers are installed and printer in operation hence need to change...


You go through the menus :
Press Right arrow once,
Then down arrow 5 times (to Reset Menu)
Press Right arrow once,
The Down arrow 5 times to Change toner C (Cyan)
Then down arrow again to Change toner M (Magenta)
Then down arrow again to Change toner Y (Yellow)
Then down arrow again to Change toner k (Black)
Select your colour to change and press the right arrow. The engine durns, open the door and remove the cartridge

Jul 01, 2010 | Epson AcuLaser C1900 Printer

1 Answer

Just changed TONER & it still flashes NEED TONER.


have you removed the plastic strip from the toner which secures your toner.

Feb 17, 2010 | HP LaserJet 1320 Printer

2 Answers

Epson C1100 K toner low, right hand side can't print


Well if the margins are not the issue, then I would change it.

But before that, try taking a cotton swab, and cleaning the "k toner", the bottom part where the ink comes out. This way before investing more money into your printer, this 'k toner' might just needed a bit of cleaning.

Good luck

Sep 10, 2009 | Epson Aculaser C1100 Printer

1 Answer

Changed Toner but its still saying "No Toner"


You may need to replace the drum this time. Usually after a few toner changes the drum needs to be changed to.

Apr 05, 2009 | Canon imageRUNNER 3300 All-In-One Laser...

1 Answer

Printer Problems


Hi, it sounds like you need to change the drum. If you are using the High Yield TN660 toner is your printer, then the drum needs changing every 3-4 toners. If using the low yield TN6300 toner then your drum needs to be replaced every 6-7 toners. Hope this helps

Nov 20, 2008 | Brother HL 1440 Laser Printer

1 Answer

Changing toner cartriges


Check to see if you have removed the shipping strip. This alows the toner to be distributed. Make sure you get the whole thing out or you will have printing problems.

Oct 27, 2008 | HP Color LaserJet 2600n Printer

1 Answer

Can not get this to recongize toner?


did you change toner from printer menu or rotate toner rack manually ??? this printer toners must be changed from printer menu, because printer counts toner there is no chip on toner.

Oct 05, 2008 | Konica Minolta magicolor 2300DL Laser...

Not finding what you are looking for?
Brother HL 5250DN Laser Printer Logo

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

James Cagle
James Cagle

Level 2 Expert

453 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...