Question about Leviton 8599 GFCI Receptacle

1 Answer

Is it OK to have 2 baths on the same circuit????

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,400 Answers

Hello
No ! not recommended,you need a dedicated circuit for each bathroom.

Since you will be using ground fault protection or a gfi circuit.

You can use 2 or 3 gfi in one bathroom but they must be connected to one breaker.

Thanks and have a good day.

Posted on Apr 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a 2013 aspen trail 3117rids and the outlet in the kitchen counter area, the out let on the island and the gfi in the bathroom don't work. ?


Have you done a VOM test on the house lines to the bath from the circuit breaker box? This is important, without the GFI in place, just the bare wire test? If you have voltage from the box to the Bath wires, then your power is correct and the attached outlet needs to be checked for continuity. If no power to the bath from the box, the circuit breaker may be bad, or tripped.

May 09, 2014 | Dutchmen RVs

1 Answer

How to start the jets on an MTI FURO MTDS 59


Checking the circuit breaker for power to the pump is obvious however the control that turns the bath pump on/off may be the real problem.
MTI has what control box to operate the pump?
Check there first because that may be the problem before the bath pump is a problem.
We would need to know the model number of the bath pump and the control box if there is one that the bath pump plugs into.

Rod
US Parts Center
888-521-6183

Mar 11, 2013 | MTI Furo MTDS-59 AST59

1 Answer

Hi I have a jacuzzi. I would like to connect it DIY


You can get 2 types of Jacuzzi baths, 1 with just a pump which just jets the water via a small pump or 1 with the pump and elements that heats the water aswell as pumps the water through the jets. Because the 1 with the elements has a higher amp rating you need to run a cable from your distribution board to your bath but the 1 without the elements you will be able to tap off the nearest socket to the bath, you will be coming from your socket to a fused spur outlet, it would be better to get a switched fused spur outlet as you will be able to isolate the bath when not in use just by switching off the switch. from the spur outlet you will be wiring it into your motor on the bath, it should say the rating of the pump in amps on the tally plate of the motor or on the manual. For example if it says the motor draws 2 amps you will be putting a 3 amp fuse into your spur outlet so if there is a fault with the motor the fuse will blow instead of tripping the whole socket circuit. All jucuzzi baths has to be connected to the RCD side of your distribution board. If you are tapping off a socket don't worry about the RCD because all sockets should be on the RCD anyway, to check that the socket is connected to the RCD plug something into the socket you are tapping off of and press the test button on the RCD, the RCD should trip and while this is tripped check the lamp or whatever you plugged in shoud be off. The Fused spur should be fitted outside of the bathroom.

Mar 29, 2011 | Whirlpool Home

1 Answer

My bath trips the electricty


Obviously a circuit overload, or short. Was it working ok, before, and have you by chance added anything to the circuit that supplies power to the tub?

May 09, 2010 | Jacuzzi - Bathtub - Alcove - Navona -...

2 Answers

I just droped mi fone in the bath


If it is droped in the bath, DON'T TURN IT ON! Let it thouroughly dry for 2 days before attempting to turn on this device. Otherwise the circuits will burn out

Aug 05, 2009 | LG KP500 Cookie black on T-Mobile U-Fix...

1 Answer

Can i discharge saniflo into bath waste


These usually have a larger drain line than a shower or bath. If you are draining into a smaller drain then there will be a considerable amount of backing up. This is not a good idea. hope this helps. Good luck.

Jul 31, 2009 | Saniflo Sanibest macerator with multiple...

1 Answer

Electric supply to whirlpool bath


remove box then put through wall put it back on other side

Feb 21, 2009 | RTO 2 Person Spa Hot Tub 8 Hydrotherapy...

1 Answer

2748.328 Town Square 5' x 42" Air Bath Tub Won't Work


Air bath tubs have a preset time limit. it could be that it reached that limit. Especially if the lights are still lit up on the control.

Dec 29, 2008 | American Standard 2748.328 Town Square 5'...

Not finding what you are looking for?
Leviton 8599 GFCI Receptacle Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Leviton Electrical Supplies Experts

 Kenneth
Kenneth

Level 2 Expert

50 Answers

Steve

Level 3 Expert

3287 Answers

Hippy_dd

Level 2 Expert

112 Answers

Are you a Leviton Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...