Question about Zebra 140XiIIIPlus Label Printer

1 Answer

I have two zebra printers 140XIIII Plus. Printing labels from the same database file. One prints the characters in boold the other one doesn't. Is this because of the driver? How can I make the two printers print with the same font properties?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

You would have to look at the Zebra programming language(ZPL) being sent to the printer. Are you writing your own code or using a labeling software package ? The printer driver will convert to ZPL if using a labeling software package. You didn't say if the two printers are connected to the same PC or two PC's. Check your formats if two PC's. Something else is going on if both printers are connected to the same PC.

Posted on Apr 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zebra printing out blank labels.


Thermal printers need to get hot to heat the special paper, which when heated prints an image.

Click here for a more detail explanation.

Usually the thermal head dies, it can be repaired, claim warranty support.
Check if your thermal printer is getting hot, if not then confirms above.

Take care!
damnor01

Jun 02, 2011 | Zebra 140XiIII Plus Thermal Label Printer

1 Answer

Label header or footer is out of page


chech if the tipe of label is correct from the driver (length and with)

Apr 27, 2010 | Zebra 2746e Thermal Printer

1 Answer

All of the sudden my bar codes are not fully printing. Missing some lines on the bottom. Also the numbers are not printing rel clear. Have ran this label before and no problem. Now it is all bar codes.


Try cleaning the printhead, then print the zebra test print. (see user manual) or just print a solid black box 4" wide by 1" long. If you have white vertical lines through it you may need a new printhead.

If print test is good try increasing the heat/darkness setting

Nov 09, 2009 | Zebra 140XiIII Plus Thermal Label Printer

2 Answers

Zebra printer 140xilll - Too many print jobs?


It does sound like you have a memory overload when you send the 2nd print job. Each label is getting sent to the printer and filling up the memory. Make sure you are using the printer resident fonts and not a regular windows font. The windows fonts get sent down as graphics and take up memory. What zebra is saying to do is store the format of the label in the printer memory and then just send down the information that changes. For example if you were printing a UPS label the basic format of the label is the same but things such as the addresses and tracking # would change.

Jun 23, 2009 | Zebra 140XiIII Plus Thermal Label Printer

4 Answers

Want to reset my Zebra 140XiIII back to factory settings?


I resolved the problem by going into the setup program and then exiting and at that point I was prompted to save my changes and one of the options was to load Default settings. Once I chose this I was able to print on the 4X6 labels correctly, before that the configuration was feeding a label and 1/2 and print across two labels.

May 04, 2009 | Zebra 140XiIII Plus Thermal Label Printer

2 Answers

Small label is being cropped at the top


Have you tried the menu settings for start top of label? If other printers work, you are talking about a configuration setting. I would get a configuration off another printer that works and look at yours real close.

May 01, 2009 | Zebra 140XiIII Plus Thermal Label Printer

1 Answer

Label Printing Issue


Send the shipping label to the printer first in your software.

This isn't a printer issue. It only prints stuff in the order received.

Steve W.
LazerTek, LLC

Jul 02, 2008 | Zebra 140XiIII Plus Thermal Label Printer

1 Answer

Printing mixup


Your problem is a computer configuration issue, not a printer problem.

Without knowing any details of your system configuration, it is impossible to offer and further advice.

Steve W
LazerTek, LLC

Jul 02, 2008 | Zebra 140XiIII Plus Thermal Label Printer

1 Answer

140XiIII left side print right side completely blank


Verify your LCD Display Print Width setting is set wider than your actual label width. The printer will only print to the width of the PRINT WIDTH setting. Also verify any driver or software settings as these override your printer settings.

Jun 30, 2007 | Zebra 140XiIII Plus Thermal Label Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

Dave Busselle

Level 1 Expert

54 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...