Question about GE JSP26 Electric Kitchen Range

1 Answer

Ge oven GETTING F2 CODE

Posted by on

  • Anonymous May 14, 2009

    i have a f 3 code



×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 619 Answers

Hi , Replace f2 mean replace oven temperature

Posted on Mar 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ge jsp 40 code f2 apears on display when trying to turn off oven


f2 means excessive oven temperature.
check the temperature sensor

Dec 15, 2014 | GE Kitchen Ranges

1 Answer

I have a ge range jmp28got1w1 i was getting a f2 code i replaced the oven sensor iturned on the oven to 400 degrees and within 3 4 minutes i got a f3 code can you help?


Hi

F2/F3 Error indicates a loose/broken wire on the oven temp sensor or the oven temp. sensor itself is bad and should be replaced. To solve this issue test the oven temp. sensor, it should read between 1080-1120 ohms, if the rating is more then that and the door appears to be closing fine then it is the control board that is bad and should be replaced. Hope this helps...please post back for further assistance.
Daniel

Aug 22, 2011 | Kitchen Ranges

1 Answer

Flashing f2 preheated on a ge-spectra


F2 fault code indicates the oven exceeded 590 degrees with the door unlocked. This could be caused by a stuck relay on the oven control board or it could be caused by high resistance in the oven temperature sensor probe.

Feb 20, 2011 | GE Profile Spectra JBP95 Electric Kitchen...

1 Answer

My ge xl44 gas range, installed in 2000, turns off and flashes an f2 code occasionally. Can you give me the reason?


F2 means: For an unknown reason, the oven temperature has exceeded a preset threshold.

G.E. recommends you try this:

Sometimes shutting off the circuit breaker that the range or oven is connected to for 30 seconds will clear the fault, error or function code, however there are some cases when further service may be required. If you would like to schedule a service appointment, please contact GE Consumer Service at 1-800-432-2737


Here is the fault code guide link:

http://www.geappliances.com/search/fast/infobase/10009792.htm


May 20, 2010 | GE Kitchen Ranges

1 Answer

GE spectra JBP66 electric oven that displays the F2


f 2 code states that oven has exccded 590 deg w/door in unlocked position or 990 f in locked . either the themp prop is bad or the relay in the EOC ( clock ) is welded closed . I would replace the prob first ( less expensive ) then the clock if needed .. **** ..

Dec 23, 2009 | GE Spectra JBP78 Electric Kitchen Range

2 Answers

GE true temp oven f2


This happens every time I clean my oven. It overheats, shows the f2 light and BEEPS loudly. The only way to stop it is to turn the oven off at the breaker box, wait until it cools (usually 2-3 hours), flip the breaker back on and start the process all over again until the unit is clean. If it's not to dirty, sometimes it's easier to juat use Easy Off.
hope it helped

Jan 09, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Ge oven codes


F2 means your oven temp got too high. At least, that's what the control boards thinks. More than likely you have a bad oven sensor or bad wire to it or a bad connection somewhere between the board and sensor.

Dec 29, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

F2 error code on GE built in Oven Model JKP13GOP


Your error code means this. F2 For an unknown reason, the oven temperature has exceeded a preset threshold.

Good Lock and Please Rate FixYa!

Dec 27, 2008 | GE JBP90 Electric Kitchen Range

2 Answers

Fault code F3, then F2


Well here's the details about those codes:
F2 :-
1. The oven temp has risen above 665F and the door is not locked or
2. The temp has risen above 965F with the door locked 1. Check oven temp in mode that failure occurred. Replace EOC (Electronic Oven Control) if above limits

F3:-
Oven temperature sensor is open (above 3000 ohms) Check resistance of oven temperature sensor, check for open wiring between oven temperature sensor

Apr 04, 2008 | GE JGBP28 Gas Kitchen Range

1 Answer

Ge gas oven/ranger xl44


The F2 is the code for the board seeing a temp higher than 600 degrees. It could be one of two things. The temp sensor is out of range, extreme high resistance. If you ohm it out it should read approx 1100 ohms at room temp. The other would be a welded bake relay on the board itself. Check the temp sensor first. If you are getting the F2 in the cleaning cycle, check the temp sensor, welded clean cycle contacts on the board or both contacts on the lock switch are closed at the same time. This is for the model posted JGBP90.

Nov 24, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
GE JSP26 Electric Kitchen Range Logo

Related Topics:

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...