Question about Whirlpool GH9176XM Microwave Oven

1 Answer

The display works (clock, mode, etc) I can push

The display works (clock, mode, etc.) I can push the LIGHT button and it shows that it is going through the settings(high, medium, low and night) but the lights stay on high permanently. When I push the FAN button it makes the beeping noise and the display shows High, Medium, Low but not fan. The turn table turns but the inside light does not work and it is not heating. Just happened. No warning at all. Help ... please.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 9,047 Answers

We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid in about a week or so.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

The lights can can be inoperable or stuck on or stuck in "night light" mode. Sometimes this will similarly affect the fan operation or inside light, too.

Feel free to contact me directly (and please remind me of your full model number from the tag on the unit) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com
Microwave Oven Control Panel Repair Nationwide

Posted on Apr 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why Kenmore microwave oven (model 80089700) start/enter button not working while all other buttons works fine?


Safety system locking out the start switch. Door not closed, mode and timer not set etc.

Apr 10, 2017 | Kenmore Microwave Ovens

1 Answer

Display turn off and the buttons are not clickable


The owner's manual is here. Be sure you have the clock set correctly.

You can also try a hard reset by unplugging the oven for a couple of minutes, plugging it back in, resetting the clock, and trying again.

Sep 04, 2012 | GE Microwave Ovens

1 Answer

Stuck on demo mode. how do i get it back to working


First of all, thank you very much for choosing FIXYA today for your online technical support needs.


Here is a direct link to the ONLINE USER'S MANUAL for that model:


http://service.us.panasonic.com/OPERMANPDF/NNC994S.PDF

To view the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and blue highlighted section of text just above.


This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the Owner's Manual.


You may need ADOBE READER installed on your computer to read PDF documents, although many computers already have this type of utility pre-installed.


You can download this free at WWW.ADOBE.COM if necessary. Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, then follow the onscreen instructions to install the software on your computer.


See page 24 of the manual for instructions on how to deactivate the DEMO MODE.


Basically, if your Panasonic microwave display shows DEMO MODE, then just press the CLOCK button on the control panel 3 times in a row.

The display should then go blank indicating that it has successfully returned to normal cooking mode and can be operated as usual.

A few models require you to push the CLOCK button 4 times to clear the DEMO mode, so try that as well if the above instructions do not work for you.


I truly hope that was helpful to you Monique.


Good luck and take care.


Joe.

Dec 04, 2011 | Panasonic NN-C994S Convection/Microwave...

1 Answer

I have maytag advance cooking system(electric) and the oven will not work.The timer to set the oven and the time is not lighting up but the stove is working.any sugestion


try resetting the clock. If it is digital, push the clock button and then the number buttons untill you have the proper time displayed...then push the clock button again. If your clock and timer are manual, try pushing in the clock lever and turning it 1/4 turn. If this works it would indicate that your timer has a start and finish time and that the oven is not working because the clock has rotated around to the finish time.

Sep 09, 2011 | Microwave Ovens

1 Answer

Electricity is on because the colon is showing. But we can't set anything, clock, power, etc. . Cannot program anything. Beeper is beeping for two short beeps around every half hour--.


Hello. Try this. Push the clock button. Then enter the time in hours and minutes, THEN push the clock button a second time. Joe

Please give my answer 4 thumbs up since it is on target and also free to you. Thanks. Joe

Oct 05, 2010 | Danby DMW753 Microwave Oven

1 Answer

My microwave shows PF on the screen and none of the buttons are working, not even the timer button. How to solve this problem ?


PF = Power failure. Try and push the clear or cancel button (or start, or clock etc) You may have missed one. If that doesn't work try and unplug it for 10 seconds or so and retry.

Sep 14, 2010 | Microwave Ovens

2 Answers

Operating Instructions Mistral MMW17SS


Hi Bryan... I had the same problem as you in trying to work out this blasted clock!!! - by fluke I worked it out!!
Here are the steps:
1 - press the 'clock' button (to ensure the clock is displayed) 2 - press the 'cancel' button (the display will go to zero '0' 3 - use the keypad to enter the time (at this stage the colen between the hour and minute numbers will not be flashing. 4 - press the 'clock' button again (the colon will start flashing and the time will be set.
your frustrations are over my friend!

May 07, 2009 | Microwave Ovens

1 Answer

My microwave clock is set in 24 hour mode and I don't know how to change it to the 12 hour mode


Depending on the brand, if you push the clock button more than once it changes from am to pm to military time (24 hour) to am, to pm, etc.

Mar 13, 2009 | Microwave Ovens

2 Answers

Panasonic word prompt microwave


You should be able to download your Panasonic owner's manual here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Nov 26, 2008 | Panasonic NN-P794SF Microwave Oven

1 Answer

How do i set clock for time of day


You can download your owner's manual free here.

From the manual:

SETTING THE CLOCK - When the microwave oven is plugged into an outlet, the oven will display " 0:00 "

1. Press the CLOCK button; the hour digit will blink
and the clock indicator will light.

2. Press the number keys to set current hour.

3. Press the number keys to set current minute.

4. Press AM/PM to choose AM or PM.

5. Press the CLOCK button again; the display will
show the present time. After the clock has been
set, the time will appear with blinking colon,
unless the oven is cooking or defrosting.

NOTES:

- To reset the present time in the display window when the oven is off, press the CLOCK button and
reset.

- If you make a mistake when setting the time, press the STOP/CLEAR button.

- To recall the actual time while the oven is cooking or defrosting, simply press the CLOCK button
and the display will show the actual time for three seconds.

We're happy to help and we appreciate your thoughtful rating of our answer.

Jul 03, 2008 | Emerson MW8107WA Microwave Oven

Not finding what you are looking for?
Whirlpool GH9176XM Microwave Oven Logo

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Whirlpool Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...