Question about Panasonic (KX-TG1032S) Phone

Open Question

NO LINK TO BASE RECONNECT AC ADAPTER - Panasonic (KX-TG1032S) Phone

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 512 Answers

SOURCE: push the talk button and it said no link to base reconnect ac ada

go to page 35 of the manual ("http://service.us.panasonic.com/OPERMANPDF/KXTG1032.pdf" if you don't have it) good luck!

Posted on Feb 22, 2009

Coleman37
  • 337 Answers

SOURCE: One of the phones gives the message

If other phones are working with this base, then you may need to register the phone with the base. You will have to check your manual for how to do this. Some phones have it on their menu and some do it by simply placing the phone in the base unit. I'm not sure what model you have or how old your system is. Hope this helps. Good luck!

Posted on Mar 02, 2010

taran_2005
  • 10515 Answers

SOURCE: KEEPS SAYING NO LINK TO BASE - RECONNECT MAIN

Hi,

ry this.

Registering a handset to a base unit


1 Base unit:

Press and hold {LOCATOR} for 4 seconds until the registration tone

sounds.

  • If all registered handsets start ringing, press the same button to stop. Then repeat this step.
  • The next step should be completed within 90 seconds.

2 Handset:

Press {OK}, then wait until a long beep sounds.


Note:

  • While registering, "Base registering" is displayed on all

registered handsets.


If the problem does not resolve, check that the AC cord is seated fully at the base of the unit and that the handset is fully charged.Use a different fuse for the phone to eliminate blown fuse issue which could be quite common.


If the problem persists, you need to send the phone for repair.


Let me know,if needed further assistance.


Hope i helped you.


Thanks for using ' Fixya ' and have a nice day!!

Posted on Sep 19, 2010

  • 4 Answers

SOURCE: Says No Link...Reconnect base AC Adapter

Disconnect the AC adapter from the unit, wait for 5 seconds, then reconnect. The plug may have become loose over time or not be fully inserted. If that does not work, try re- registering the handset.
To re-register, see screenshots attached. pianistas.png pianistas_1.png

Posted on Mar 06, 2011

SOURCE: "No link to base, reconnect

Disconnect the AC adaptor from the unit, wait for a minute, then reconnect. The plug may have become loose over time, or not fully inserted. If that does not work, try reregistering the handset, another handset may have deregistered this handset.Initially, the displayed message indicates that the base is not receiving power. Verify that the base is lighted up / powered on.Try a full hard reset on the Panasonic KX-TG9333T by disconnecting the power and telephone line connection to the base and remove the batteries of the 3 handsets. Allow unpowered, disconnected condition for an extended period of time (6-8 hours). The idea is to force the system to revert back to factory defaults.Reconnect the KX-TG9333T and the batteries to the handset. Recharge if necessary. Go through the initial set-up procedures.

Posted on Aug 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Says No Link...Reconnect base AC Adapter


Disconnect the AC adapter from the unit, wait for 5 seconds, then reconnect. The plug may have become loose over time or not be fully inserted. If that does not work, try re- registering the handset.
To re-register, see screenshots attached. pianistas.png pianistas_1.png

Mar 06, 2011 | Panasonic KXTG4011 Cordless Phone

1 Answer

How to register phones?


Reset Procedure for Cordless Phones
1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances.

Mar 02, 2010 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

No link to base


This may help. It's from the Panasonic help page:

You may try to:

Disconnect AC power adapter from the back/bottom of base unit, then connect it again properly.
spacer.gif OR, to resolve this issue, you have to re-register the handset.
  • To do this on a non-expandable cordless phone:
    Press and hold the LOCATOR/INTERCOM button on the Base until a beep sounds.
    Press and hold the FLASH/CALL WAIT button on the Handset until a beep is heard.
    When registration is complete, a beep sounds from the handset.
    Wait for 20 seconds after registration is complete to allow the handset to establish communications with the base.
    If this fails to help:
    Remove the AC Adapter from the phone base or wall outlet for a few seconds and reconnect. It may also be necessary to remove the battery from the handset for a brief moment.

  • To do this on a expandable cordless phone system:
    Press and hold the LOCATOR/INTERCOM button for the extension that is displaying "No Link To Base" on the Base until a beep sounds.
    Press and hold the FLASH/CALL WAIT button on the Handset that is displaying "No Link To Base" until a beep is heard.
    When registration is complete, a beep sounds from the handset.
    Wait for 20 seconds after registration is complete to allow the handset to establish communications with the base.
    If this fails to help:
    Remove the AC Adapter from the base or wall outlet for a few seconds and reconnect. It may also be necessary to remove the battery from the handset for a brief moment.

Jun 24, 2009 | Panasonic KXTG5632BP Twin Cordless Phone

1 Answer

My tru9480 handset is saying connecting but won't connect and won't get a dialtone


Reset Procedure for Cordless Phones
1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances.

Jun 13, 2009 | Uniden TRU9480 Cordless Telephone

1 Answer

Uniden base display does not work after chargin for 1st time.



Reset Procedure for Cordless Phones

Question:
0.gif
What is the general reset procedure for cordless phones?
0.gif
Answer:
0.gif
1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances

May 05, 2009 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Hit the deregistration button. phone will not work now.



Reset Procedure for Cordless Phones

Question:
0.gif
What is the general reset procedure for cordless phones?
0.gif
Answer:
0.gif
1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances.
<KEYWORDS="RESET, call,? can?t tone, dial no flashing, unavailable, range, of out working, not up, messed>

May 05, 2009 | Uniden Cordless Phone

1 Answer

My phone is dead



Reset Procedure for Cordless Phones

Question:
0.gif
What is the general reset procedure for cordless phones?
0.gif
Answer:
0.gif
1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances.
<KEYWORDS="RESET, call,? can?t tone, dial no flashing, unavailable, range, of out working, not up, messed>

May 05, 2009 | Uniden Cordless Phone

1 Answer

Push the talk button and it said no link to base reconnect ac ada


go to page 35 of the manual ("http://service.us.panasonic.com/OPERMANPDF/KXTG1032.pdf" if you don't have it) good luck!

Feb 16, 2009 | Panasonic KX-TG1033S Cordless Phone

Not finding what you are looking for?
Panasonic (KX-TG1032S) Phone Logo

Related Topics:

1,196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

john milligan

Level 3 Expert

512 Answers

george  peters
george peters

Level 3 Expert

860 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...