Nat i have a motorola router with vonage service on it. I need to know how to change my nat from moderate to open so that i can play on xbox live.

I just opened my NAT type to play xbox live...using a SURFboard Motorola.
And this site helped me alot:
http://webcache.googleusercontent.com/search?q=cache:d_5pu90czsoJ:news.softpedia.com/news/Guide-to-Opening-NAT-Xbox-360-71775.shtml+nat+type+xbox+360+open&cd=2&hl=en&ct=clnk&gl=ca


but watch this video first, cause it will help out allot too:
http://www.youtube.com/watch?v=gb9kafn8Ebs


With these guides, and bit of web reading from other peoples FAQ's.. I did it.

The guide you need will depend on what modem/router you have.

Good Luck

You are trying to open the NAT on the router for X-box.
For this you will need to reduce the MTU settings on the router to 1365.
You will also need to trigger some ports on the router.
For this you will need to open the router set up page.
Router set up page is the page where you can change the settings of the router

Click Here to know more about router and network

TO opennthe NAT in your router. you willl need to make some changes on your router.
You will need to reduce the MTU on the router to 1365.
you will need to disable the firewalls on the router.
There are some port numbers that you will also need to open on the router.
For this you will need to open the set up page of the router.
Click Here for more info

make sure the security settings on router is WEP-Personal. I don't know what you have for internet but Dial-up, DSL, and satellite internet will not get NAT 1.

yo tengo problema co el asistente de conexion del linksys

This one is simple. Find the IP address that your Xbox is assigned by your router, then put it into the DMZ. This also goes for PS3 users who are having trouble with internet access.

You need to open all the ports for the xbox live. The NAT of that router model cannot be configured to open. Its just a simple NAT for internet connection.

You need to call xbox live tech support. From there they will give you a code. This code will need to be entered in the settings for you wireless interenet product under "Port range forwarding."

You need to check first if your router is Xbox Live compatible (all routers will work, but only certain ones will allow an open NAT):
http://www.xbox.com/en-us/support/connecttolive/xbox360/homenetworking/equipment.htm

If your router IS on the list, make sure you have a compatible firmware version (usually the firmware version is written on the router somewhere). If you do not have the proper firmware, you will need to downgrade your firmware (reply to me for instructions on this).

If your router is not on the list, you're outta luck.

Ok kids... all you hve to do is log in to your belkin 54g at http://192.168.2.1

Find out what ip address your xbox is using and then Click on the DMZportion of your settings on the left hand side of the page.

Enter the xbox's ip address and click the enable box.
Click apply.


Your NAT will now be OPEN!

Cheers!