Question about Behringer DJx700 5-Channel Pro DJ Mixer with Digital Effects & Bpm Counter

2 Answers

I think my crossfader stop working for some reason. when im on side B i get sound then i slide over to side A and i still get sound from side be,,, all the assign are right also the bass mid and hi kill switch dosent work on side B should i replace the crossfader or buy a eniter new mixer. what should i do

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Just check that is not cruded up and the brushes can't disconnect from one side of the fader remember contact cleaner and vasiline are your best friends

Posted on Jan 05, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Behringer Master
  • 5,603 Answers

I suspect one end of the crossfader pot has broken from the element. The fader probably costs less than $5.

You likely will have to remove all the knobs and some screws to seperate the board with the fader from the front panel so you can replace the fader.

VERIFY the pot is bad with an ohmmeter before dis-assembling however.

You MAY be in luck. It looks like the cross fader has a connector which MIGHT allow you to remove it or certainly only a small board for replacement, seeing these take abuse.

It appears that the cross fader is a dual 100K type B taper.

Posted on Apr 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I Bought the Denon Mc2000 Dj Controller, The Place Where i dj has its speakers coming with 2 RCA cables to plug in plus I have to bring one of my Amplified speakers(JBL EON 15'')... I have tried al...


you are getting reverse polarity, meaning the speakers on one is the opposite as the other, black>red red>black, thus only getting vocals or music.

Oct 18, 2013 | JBL Music

1 Answer

HOw do you use the crossfader if all your music is coming through one port???


The crossfader is to gently fade from one source to another. If you only have one, the crosfader isn't useful... it would act like a plain fader with one side being dead and the other at full volume.

Aug 06, 2011 | Behringer DJx700 5-Channel Pro DJ Mixer...

1 Answer

The Crossfader does not work. I just bought it. I don't think it's broken even though everything else works.


Exactly the same thing happened to me think they send them out like it so you get the info fader upgrade I took out the two screws popped the fader out it was cruded up so I sprayed contact cleaner in to it.Just to clarify you have it set up right if your using it just with software you need the in on chan 2 out on chan 3 on the front and make sure the curve is set right

1_5_2013_12_06_07_am.jpg

Mar 28, 2011 | American DJ VMS4 Digital DJ Work Station

1 Answer

Hello. I am having a problem with Reason 5. The sound will not work- although I am getting a signal from the mixer, and it was working just fine a minute ago, there is no sound coming out of the...


I have the same problem, no word from Reason yet.
but what i keep doing is re-enter the program.
what i THINK the reason is, is that if you have soo many number of instrument programs hooked up to the mixer and what not, it blows reason 5's mynd!....
it has to be, because 3-4 yea your good, but 7 8 9 10, thats when i start getting problems! even fruity loops did a little better then this....(sad face). if i kno how to fix this foreal FOREAL, den ill post back..
Dre'
S.C

Jan 13, 2011 | Propellerhead Reason 5

2 Answers

My vmx1000 mixer the crossfader only cuts out one side the other just contiues to play no matter what side u put it on


I suspect that one element of the crossfader pot (slider) is broken. Possible cause is if something fell on the knob or wear from use.
If one end breaks on one channel, the opposite end side will remain on full while the other channel will behave normally.
Replacement of the dual pot will LIKELY involve removing all panel knobs to remove the circuit board to replace the pot after disassembly of the unit. Not for the casual DIY person.

Nov 17, 2010 | Behringer Pro Mixer VMX1000USB...

1 Answer

What lube can i use to clean numark nuvj crossfader. i'm gettin a leak while using the fader.


Usually a "leak" from one side to the other is an indication of a cracked resistance element. The fader would have to be replaced.

I lube the faders on my mixers using CRC226 availablle in the electrical dept at Home Depot. Use sparingly.

Aug 12, 2010 | Numark Nuvj DJ Video Mixer

2 Answers

How do i set the control for the crossfader on the djx700


u should b able to use it so long as you change the mode from stereo to split, then you can just use the panel at the bottom that says "crossfader:" :P

Feb 11, 2010 | Behringer DJx700 5-Channel Pro DJ Mixer...

1 Answer

Reason as a sound module with the 8800


I have a boss 1600 and ive used it in the way that sounds similar to you situation.It sounds like you have overdubbed track 1 to next track.If you dont want to hear track 1 while rec. track 2 turn fader down, unless you have already recorded or overdubbed 1 to 2.You should be able to hear track 1 unless you turn fader down or cancel tracksound for the time being.track 1 swhould be heard but it wont be re-recorded youll only hear it unless you turn fader down.Thats how mine works anyway.It lets you hear it if you want but wont record until you song save or during bounce nd mixdown.Then you select the tracks and or the virtual track you want to use.Id try to undo or stat again and read about the overdubb in manual.Im sure youll figure it out.I cant hardly imagine what all that 8800 has and is capable of doing.But ive seen one and i think the midi devices work alot alike.Hope you get it.Praisehim316.

Oct 10, 2008 | Roland Mv8800 Production Studio

Not finding what you are looking for?
Behringer DJx700 5-Channel Pro DJ Mixer with Digital Effects & Bpm Counter Logo

Related Topics:

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Music Experts

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Ben Armstrong

Level 2 Expert

334 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...