Question about Sony PSP-3000 Silver Console

1 Answer

I plug in data cable and there is no response at all.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,157 Answers

Hi wesunion, Based onyour concern, I suggest trying the following steps: 1. Before you plug it in make sure the PSPis in USB connect mode. 2. Connect the PSP to your PC with a USBcable. 3. Press the "home" button on thePSP --> atthe lower left of the screen you can see the home button. 4. Use the left-right directional buttons tofind "Settings", then the up-down buttons to find "USBConnection" on the PSP. 5. Press the "X" button, your PSPshould display "USB Connection". 6. Please wait until your computer tells youthat a new USB device has been connected, then show you a new generic harddrive, usually E: or F: 7. Click on the drive letter thatcorresponds to the PSP unit. Hope ithelps, Thank youfor using FixYa.

Posted on Feb 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No response from host error message display on mobile screen when i connect cell with data cable


cleaned both point of your connector of your data cable and phone it could be dirt that prevent data to communicate.Isolate cable by brand new cable. If it is doesn't work reset your mobile to default factory settings.

Sep 09, 2011 | Nokia 2626 Mobile Phone

1 Answer

I bought a DV/Firewire cable, in order to plug the Canon MV800i camcorder, but once it is plug, how can I get the datas from my many tapes, onto my Apple Computer in order to save the tapes onto...


Connect the camera to the Mac with the firewire cable.
Open iMovie and capture the required footage.
Send the iMovie project to iDVD and burn a disc.

Apr 02, 2011 | Canon MV800i Mini DV Digital Camcorder

1 Answer

The SimpleTech 160GB ext. drive has a usb 2.0 cable with a y plug. I can only plug in one but I use the additional power supply. I get a message at times telling me to use the usb 2.0 port for faster...


You are using the correct connection, the external power supply is powering the drive, so the USB cable is just handling data. I believe the message may be telling you that you will get faster performance using a USB 2.0 connection, it is probably sensing that your computer's USB port is USB 1.1.

Feb 24, 2011 | SimpleTech Signature Mini 160GB External...

1 Answer

My iphone suddenly turned off yesterday. I charged it all night, but it won't turn on


hold the home button and the power button for 20 seconds

if u get no response, open ur itunes, hold the home button on the iphone for 5 seconds, and while holding the button, plug in the data cable

good luck

nick

Aug 17, 2010 | Apple iPhone Smartphone

1 Answer

Printern will power on Ok, calibrates itself. After a couple of minutes the printer powers off, screen blank, no response, I have to power off and on again to get any use, then it powers off again after...


Are you using a power surge device or uninterruptible power supply(UPS) to plug printer in to? Bypass any of these as these devices can interfere with the electrical flow which cause power failure to the printer. Disconnect any data cables (parallel, USB, ethernet) behind the printer. Possible defects on these cables can cause electrical short circuit that could result to loss of power.

Jun 19, 2010 | Lexmark C543DN Laser Printer

1 Answer

Dell gx520 will no boot, no response


ok
open cpu cover and refix RAM and connection of power cable and data cable to harddisk.

Apr 16, 2009 | Dell OptiPlex GX520 PC Desktop

1 Answer

Connect internet throough Mobile office


The phone needs to be plugged in to the usb port Via the data cable and set to modem in the phone settings,you will also need the USB modem driver for your phone.You can get it from Nokia.com

Mar 15, 2009 | Nokia 6300 Cellular Phone

1 Answer

My wd my book when plugged to computer will not give me any useful data,such as a memeo to look up the condition.I plugged and played mybook but no response was given to me . Thanks for your time , hoping...


Is it External USB?
Try replacing the USB cable - these external USB HDD are known to come with cheap, made in ??? cables that turn out to be ****. Loose or iffy connections between the Power or Data and Clock pins/connections while WRITING may/will result in data loss, HDD corruption or just plain toast.

Spend 10-15.00 and get a good one with heavier-type cable that will work.

Good luck!

Feb 22, 2009 | Western Digital Computers & Internet

1 Answer

Have abit - kn8 put 2 gig memm in powered up no picture think I have wrong video card do you know proper one


Hey there,

As per ur question, this problem occures due to following reason:

1. When ur data cable of ur monitor is bad : Try another data cable this causes only to blink LED of ur monitor which not allows any graphics to display.

2. Your RAM can also be responsible for this problem: If your RAM goes Bad then it doesnot allow any graphics file to load and thus causing not to display anything on ur monitor screen as well as ur system keep restart at POST (Power On Self Test) Operation (When VRAM driver is not loaded.

and the last reason is:

3. Your system is not able to recognise your Graphics card due to Either IRQ inteferance or ur graphics card hardware problem (caused due to bad of VRAM installed on ur graphics card): Remove ur graphics card from expansion slot (PCI-E/AGP)and then plug monitor data cable to normal serial port available in the motherboard (Resides back side of ur system).

Thanx

Gimme ur acknowledge by rating me.

--
Romy Decostza

Dec 24, 2008 | Abit KN8 SLi Motherboard

Not finding what you are looking for?
Sony PSP-3000 Silver Console Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

shaun taylor

Level 3 Expert

1525 Answers

marley mcelhinney

Level 3 Expert

490 Answers

juanmireles1

Level 2 Expert

197 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...