Question about Refrigerators

Open Question

My Dixie Narco pepsi maching clicks but isn't cold, is it fixable

I have a Dixie Narco pepsi maching Mod number dncb 276 that is not keeping the soda cold. It's not iced up on the coils either. Can it be fixed or is it too old?

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bobicehouse
  • 1524 Answers

SOURCE: My pepsi machine is not

Yes the new refrigerants can be used, however you must be EPA Certified. Also why would it need re-charging ? Leaks must be repaired.

Posted on Dec 05, 2010

  • 1 Answer

SOURCE: We have a Dixie Narco DNCB

Check behind the coin mechanism. When you open your machine, pull out the coin mechanism. You will see a set of dip switches there. Go to this page for more help. http://www.vendingadvantage.com/troubleshooting.htm

Posted on Aug 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The bill acc. blinks 3 times, bill & cion mechs have been changed, still blinks three times. won't take any money or vend.


Try it without the bill acceptor attached to get the machine working. You did not say what kind of acceptor but three flashes often mean a bad sensor in the unit. Another possibility is that it is disabled from the vendor. Check that all the columns have returned to home position if it is a bag vendor. If it is a pop machine then take off the metal cover over the vend motors and CAREFULLY push down on the microswitches to see if the motors run. Pop may fall out as you do this so watch for it. After running all the motors or homing out all the columns try you machine again. You will probably have to get the bill acceptor fixed though.

Dec 10, 2015 | vendors equipment Dixie 276/368/501 Can...

1 Answer

Pepsi machine repair


It is not pc based like newer ones, no reset. A part needs repaired or replaced. Unplugging it is the closest thing to reset.

Apr 14, 2014 | Refrigerators

4 Answers

Does it matter if I drink Diet Coke or Diet Pepsi for my diet?


Both drinks are diet sodas without any sugars or calories, so they both would work just fine for your diet. It's just a matter of taste; they both have pretty much the same nutritional values.

Feb 04, 2013 | Wine & Spirits

1 Answer

I need a shop manual/repair manual for a dixie narco dncb 368, where can i find one? I have bought an old machine and trying to get it working.


whats wrong with the dixie I spent ten years repairing these for coke and pepsi cola so if you have any questions I can help you with the repair I await your reply thanks again Rick

Apr 29, 2011 | Refrigerators

1 Answer

We have a Dixie Narco DNCB 240M/138-6 PE2299 Soda Vending Machine How do we increase the amount per soda?


Check behind the coin mechanism. When you open your machine, pull out the coin mechanism. You will see a set of dip switches there. Go to this page for more help. http://www.vendingadvantage.com/troubleshooting.htm

Apr 13, 2011 | Vacuums

1 Answer

My pepsi machine is not keeping the beverages cold, i was going to recharge it and put new freon in it. My question is, can i use a different rated freon than the one recommend with the...


Yes the new refrigerants can be used, however you must be EPA Certified. Also why would it need re-charging ? Leaks must be repaired.

Dec 05, 2010 | Refrigerators

3 Answers

VENDO PEPSI 407 soda machine


selection number 7 reads sold out but its full i have a vendo drink machine that is electronic and i push the code button to test then select number 7 vend on first button then third button to test vend and it showed an error failed .what else could i try i need some sujestions. please.

Apr 23, 2009 | Refrigerators

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Brian Coughlan

Level 2 Expert

275 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...