Question about Westell Wirespeed ProLine 6100 Router (C9961001100)

1 Answer

I changed my PC's operative system to Window 7 Pro

I changed my PC operative system to Window 7 Pro and the westell e90-610030-06 modem is not working, the USB light is off and the message I get is not connection, I called ATT, my internet provider and the person who I spoke to told me to go to "local areal connection" and select disable, the icon dissapear and not sure if that was a good idea. Obviously ATT is not going to help because they said there is a PC problem,
Can you give me any help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,768 Answers

1. here is the information to get to Westell tech support
This product was specifically designed for CenturyTel. You will need to contact CenturyTel for any support issues.
Their support number is 800-809-1410.
Here is the firmware update page with other information you will need to set up your router properly,

http://www.dslreports.com/faq/6096

Posted on Apr 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Modem installation


It is not a lost cause BUT you will have major issues connecting to most websites because the browsers are so advanced now that if you connect, it wont display correctly and there is an issue with some secure servers rejecting you because the operating system can be read and the server wont allow the connection.
http://www.dslreports.com/faq/bellsouth/3.14_Westell_2100_2200_6100_Info#7342

Jul 26, 2017 | Westell Wirespeed Westell Dsl Router Wind...

2 Answers

Will a westell modem work on a computer that had dial up.


What do you mean that pc has dial up? Did you mean that you have a dial up connection to the internet? If that is the case, using a westell modem is not necessary because dial up connection just uses a phone cable directly plug in at the back of your pc where you will see a port for phone cable. If you have a dsl connection and your pc is currently configured for fial up set-up, then you can use the westell modem but need to check first if westell modem s compatible with your internet service provider.

Sep 07, 2011 | Computers & Internet

3 Answers

I have got winfax pro some years back I have now upgarded my Operating System to window 7, but I get the message incompalable with window 7 can you please help


I have got winfax pro some years back I have now upgarded my Operating System to window 7, but I get the message incompalable with window 7 can you please help

Jul 16, 2010 | Symantec WinFax Pro for PC

1 Answer

I want to use the modem on my pc but at the same time what to join the xbox live


Either you get a router to allow your pc and xbox to get online at the same time.
OR,
You may contact your Internet Service Provider and ask them if they can replace your Westell Wirespeed with a Westell Versalink (modem/router-in-one). Mostly, ISPs will inform you if it is cheaper to buy a router from them or replace the modem.

Nov 17, 2009 | Westell Wirespeed LiteLine 6110 Modem

1 Answer

Westell 6100 is blinking Ethernet and Internet lights and Media player buffers and times out. Help


Hi,

ethernet light should no blink

check the LAN drivers..if possible reinstall them..do a complete powercycle.of the system.
Switch of the pc-modem-router..wait for 1 minute then switch on the router/modem wait for all light to come back-switch on the pc..if intermet light is blinking there might be an issue at the ISP's end.

Http://www.ikarmatech.com

cheers.

Sep 11, 2009 | Westell Wirespeed LiteLine 6100...

1 Answer

Need to redo wireless setup betw linksys & westell


You will need to assign a different ip address to the Westell modem - I am assuming that both the router & modem are using the same ip address 192.168.1.1? If that is the case, then assign 192.168.1.2 to the modem.

Mar 15, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

I have a dlink router and I want to connect my usb modem to it


is this an additional router?

Verizon are issuing modem with built in wired and wireless modem.

Try this;
How do I properly set up a D-Link Router with a Westell Modem? (#7125)
This FAQ is for setting up a BellSouth supplied Westell 2100/2200/6100 modem (Models A90-210030-04, B90-220030-04 and B90-610030-06/C90-610030-06, respectively) with a D-Link DSL router. Although actual screen shots vary throughout the DLink line, the instructions below are applicable to all models. Important Note: These procedures and pictures are based on the most recent firmware for the Westell. Other Westell firmware menus and screenshots are slightly different but the bridge options and functions are still available. It is highly recommended that you click here and update your Westell firmware.

This FAQ has 3 Major sections:
Section 1 - Overview
Section 2 - Westell modem configuration
Section 3 - D-Link router configuration information
Section 4 - Connections and power up

Section 1 - Overview
bred.gifImportant Note: Due to some known operational issues it is VERY important that you have the latest firmware on your D-Link router. Please go to the D-Link Support Site for firmware updates.
bred.gif The best configuration for networking a router with the Westell is to set the Westell to "Bridged Ethernet" mode and allow the router to do the routing and DHCP functions. The Westell is also a router with full DHCP functions and may not function correctly when connected directly to another router. Not changing the modem to Bridged Ethernet will result in double NAT'ing, increased latency, possible IP conflicts, or possibly a network that doesn't work at all.
bred.gif Before proceeding both the modem and router should be set to default. Despite what the help desk tech tells you, resetting the Westell does not put it into Bridged Mode.
bred.gif The BellSouth Installation CD and Connection Manager are not required to use this configuration.
bred.gif Since BellSouth assigns static WAN IPs via your username the configurations shown are applicable to both dynamic and single static IP customers. Select dynamic PPPoE regardless of your setup.
bred.gif You must connect the Westell directly to the computer's NIC to make the necessary changes before you connect the router, because you will be unable to access the modem interface after you connect the router. The reason is that the modem interface is 192.168.1.254 which is a local IP. By default, most routers do not have the capability to route a local IP out of their WAN port (where your Westell is connected). Additionally, they may be on completely different subnets. After you have made the changes to the Westell you can then connect the router and configure it for use with FastAccess. There are several alternatives around this problem. One method involves extra equipment (second NIC and a hub) and major configuration changes. The second method requires you to utilize the router as a simple switch and use the Westell's PPPoE and DHCP functions. Click here for more information.
bred.gif If you encounter any problems simply reset the Westell, connect it directly to your NIC, restart your computer, log into the Westell interface, and start over again.
bred.gif More information about the Westell is available here.

Section 2 - Westell Configuration
bred.gifStep 1
Verify that your NIC card is set to "Obtain IP Address Automatically". Completely power down the Westell and the computer(s). Power up the modem and press the reset button on the back of the modem. After the modem has fully initialized connect the Westell to the NIC and then power up the computer.

bred.gifStep 2
Open a browser session and enter 192.168.1.254 in the URL address field to access the Westell interface. If you are unable to access the interface make sure your NIC is set to "Obtain an IP address automatically". This may require you to reboot the computer (or release/renew) to obtain a proper IP.

bred.gifStep 3
Click on Broadband DSL Line from the top menu. Click on Configure Connection from the right menu. Select "Bridged Ethernet" from the Protocol pull down. Click on Save and restart the connection at the bottom. This will automatically restart the modem and the interface will return after the changes are saved. Note: functions like NAT, DHCP, IP Passthrough, and username and password will be disabled or irrelevant and can not be selected. After the modem has restarted, power down both the computer and the modem then physically disconnect the Westell.

Section 3 - D-Link Router Information
bred.gifStep 4
After the PC is powered down connect one of the router LAN ports to the computer NIC and power up the router and then the computer.

bred.gifStep 5
Use the following steps to configure your D-Link DI-604 Router. Important Note: You must use the username@bellsouth.net format for your username. If you do not add "@bellsouth.net" after your username you will be unable to connect to the internet.
image92920.gif
image92921.gif
image92922.gif

Section 4 - Connections and Power Up
bred.gifStep 6
Power everything down and physically connect the Westell, the router, and any computer(s).

image78985.gif
Westell 2100 shown. Pictures by Andy Houtz

bred.gifStep 7
Power up the network equipment in this order:
•Westell Modem (wait till the Ready light is a steady green)
•D-Link Router
•Computer(s)
Open a browser session and go surfing!

bred.gifAdditional Imformation
•You should check your tweak settings to optimize your new network. Reminder: If you are required to change your MTU, make sure that it is identical on all equipment (PCs and routers) in the network. For more information about changing MTU on a D-Link please click here.
•The 6100 has an "Internet" light that is green whenever there is an active PPPoE session initiated by the Westell. Since you are using the DLink to establish the PPPoE session the light will stay off. This is normal.


Mar 13, 2009 | D-Link 802.11g Wireless Router WBR-1310...

2 Answers

Westell 327w channels


Type in http://192.168.1.1 in your browser window, this will take you to the Westell Home Page (your router). There are tabs at the top, select Configuration>Wireless>Basic, this will open a Wireless Operation Window. You will see Channel in the 3rd box down. Click on the arrow to change the channel, then click save at the bottom. Close all windows and X out of the browser.

Oct 18, 2008 | Westell Wirespeed VersaLink...

2 Answers

Westell 6100 dsl modem


I use a Westell 6100 modem....internet goes out periodically and is not red...just blank....in a few minutes it comes back on....and later out it goes again....

Dec 02, 2007 | Westell Wirespeed LiteLine 6100...

1 Answer

Mtu


The modem (westell wirespeed)you have does not have is a old modem... that does have options to set the mtu settings. You need to change the modem. By the way why you need to set the MTU settings,.

Apr 07, 2007 | Westell Wirespeed LiteLine 6110 Modem

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westell Wirespeed Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

arnold balmaceda
arnold balmaceda

Level 1 Expert

13 Answers

Are you a Westell Wirespeed Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...