Question about Samsung HLR5067WX 50" Rear Projection HDTV

2 Answers

I have a Samsung HLR5067WAX/XAA 56 inch, rear projection. Replaced lamp on it two years ago, was working fine. This morning a sudden thunderstorm blew in. When the power came back on, the cable picture looks kile green and pink plaid. The TV Guide Screen came in fine. After unplugging the set and letting it sit, I plugged it back in, the cable and DVD picture still scrambled, and it started to make a high pitched whine. Had to unplug TV from wall because the Off button would not work. What can I do to fix this?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 336 Answers

Hi,If your tv is a dlp you might be experimenting a color wheel problem.The color wheel is a rotating disc that has a gamma of colors it spins at high rpms.The light of the lamp goes through it to create the colors on your tv.When it starts to go bad you will get color distortion ,black and white picture and sometimes you will hear humming noises.Here's the instructions to replace it http://www.fixyourdlp.com/guides/samsung/bp96-01579a.php and your part # is BP96-01103A Have a bless one!

Posted on Apr 26, 2010

Testimonial: "Thank you! "

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 33 Answers

These sets are known for this issue when the digital board goes bad. Do your on screen menus look normal? if so then i'm 99.9% sure it's the digital board.

Posted on Jul 05, 2011

  • Jason Miller Jul 06, 2011

    ps. your tv is also a 50" if it was a 56" the model number would be hlr5667w. since its a hlr5067w it's a 50"

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV lamp has been replaced, still won't come on, no picture. When turned on, I can see a blue, kind of sparking light and noise starts and does this about three times. TV powers down and does this again....


Samsung DLP TV Repair - No Picture - Replacing ...

? 2:41
https://www.youtube.com/watch?v=pBTgk_C5FVU
Jun 11, 2012 - Uploaded by ShopJimmy.com
DLP TV Repair No Picture Bad Lamp Bad Bulb TV Won't Turn On DIY Samsung DLP TV Repair How to replace Faulty LampTutorial Click Here to ... Rating is available when the video has been rented. ... is a replacement for the following DLP Rear Projection TV models: ... SAMSUNG HLR6167WX/XAA

Samsung DLP problems - Help! - ecoustics.com

www.ecoustics.com > ... > Home Video Forum > Projection TV Forum
Oct 26, 2009 - I have attached a picture of to show where the "Light Tunnel" is located. Upload ... So now I have a Samsung HLN5065W/XAA that I am willing to part out or sell as is. ... I replaced the ballast but the TV still won't turn on. .... The lamp has been sitting on a shelf until two weeks ago, when the TV went dark. Samsung DLP Light Ballast
Apr 10, 2009
Archive through October 26, 2009 - Samsung DLP problems ...
Apr 8, 2009
Samsung DLP Flashing Standby light
Jul 1, 2006
More results from www.ecoustics.com

Jan 19, 2016 | Samsung SELECT HLR6167WX/XAA Rear...

1 Answer

Samsung dlp


If you have have 40 vertical lines 16 pixels wide: DDP1011 or BCA, DMD panel interference: Replace the DMD board.

Jul 26, 2008 | Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

My Samsung HLR5067 was working fine last night. I left the house open and it dipped in temp (only to 40 degrees or so though)...Woke up this morning and it wont turn on at all. Just beeps a few times,...


Tv projection Lamp might be some how the causes again.Tries unplug,replug tv back like about an hour later.Try it again,should work now.If not,yes the projection lamp,might have been kill by the cold weather.

Dec 06, 2010 | Samsung HLR5067WX 50" Rear Projection HDTV

1 Answer

I have a 50 inch samsung hlp5063xa/xaa n i have audio but no picture the lamp light is blinking so i replaced the lamp and still no picture ???


Now,tv turn on hear any clickings sound too?That,mean the Ballast board it also dead.This board,help to ignite the projection lamp.

Aug 16, 2010 | Samsung HCM4215W 42" Rear Projection...

1 Answer

Samsung 56 inch lcd tv..picture suddenly got darker not clear anymore....what can it be??


I belive this is a rear projection tv and if the picture has gotten darker.... most likely the problem will be in your TV Lamp.

Apr 30, 2010 | Samsung HL56A650 56 in. TV

1 Answer

My samsung HLR5067WAX/XAA picture is getting darker slowley but surely


The 120 Watt lamp is probably losing High pressure Sodium and will need to be replaced. Lamp Code BP96-00826A (P120W)
Would be the first thing to replace.

Mar 11, 2010 | Samsung Televison & Video

2 Answers

Shadow appeared on my DLP TV after replacing the lamp


this is a light tunnel failure this component will have to be replaced and is a part of the light engine

Feb 14, 2010 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Our Samsung Model HLP5063WX/XAA - dark images


I suspect that you may need to replace the ballast for the lamp and the power supply board.

Oct 30, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

White dots on screen of 50 Samsung DLP


Random dots or pixels failing on a DLP TV will be a bad DMD chip. This is a technician replace item only. The chip runs around 160 dollars list price. The part number will depend on which version the set uses and will be determined by the technician.

Jul 23, 2009 | Samsung HLN567W 56" Rear Projection HDTV

Not finding what you are looking for?
Samsung HLR5067WX 50" Rear Projection HDTV Logo

1,121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73665 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...