Question about Zebra Eltron P330i Card Printer

Open Question

My P330i don't recognize the color ribbon. How do I calibrate it? Will that correct the problem?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 8 Answers

SOURCE: What does a Polaroid p85igc card printer use for a

The "i"suffix was introduced in around 2005 to try to stop patent infringements on the printer ribbons. They introduced a chip on the spool that feeds back to the printer. The chip has to be the correct coding for the badge of the printer. Zebra P330i printers are essentially the same as Javelin J330i and Polaroid p85igc but have three different part numbers for their YMCKO ribbon. You can run any monochrome ribbon on them because the mono ribbons have no chip.....not much profit for the brand owners. YMCKO however is not interchangeable. Find a Polaroid dealer for the full colour ribbon.

Posted on Dec 15, 2009

Ad
  • 4 Answers

SOURCE: keep getting broken ribbon message on zebra P330i printer

Hello, assuming the supplies are Zebra and there is no discernible damage to the ribbon, it could mean that the ribbon sensor on the printer is broken. if your printer is still under warranty you can ship back to Zebra (Illinois) to get it repaired. The zebra website has info on how to return printers for service. Hope this helps.

Posted on Mar 08, 2010

ozztech
  • 285 Answers

SOURCE: Zebra P330i out of ribbon

Send a command "!SA" The printes go recalibrate it self, don't forguet to put a card on the feeder.

Posted on Nov 12, 2010

ozztech
  • 285 Answers

SOURCE: have problem wiht zebra p330i

send !SA command from the driver to calibrate.

Posted on Nov 13, 2010

ozztech
  • 285 Answers

SOURCE: Zebra P330i Printer not counting the YMCKO ribbon correctly

!RIBLEN - - - - Get number of remaining panels on ribbon
Send the command !CSA_0
Send the command !CSA_1

Posted on Nov 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i use Zebra i-series YMCKO ribbon in Javelin i-series printer


hi, not sure, but they have diferent ribbons, 800000-440 or -415 ....
try difirent ones

May 13, 2014 | Zebra P330i Thermal Card Printer

1 Answer

P330i gives out of ribbon error. When completing command "!SA" it ran the blank card through the printer into the other side. After right after that the printer flashed the "out of...


The printer uses three sensors in relation to the ribbon. The RFID (chip on ribbon). When you go into the printing preferences for the printer it should detect any color ribbon, and say ribbon type changed to (ribbon type). If so both the ribbon and RFID sensor are working properly. Then there is the color ribbon sensor, which has the blue and amber LED's, and is used to detect the panel of the ribbon. Thirdly the flag sensor which is on the back end of the supply reel, to detect the ribbon turning. . Additionally, CALIB command has never worked for me. !SA is an auto self adjustment for multiple sensors. additional you can use !CSA 0 without ribbon in machine, then run !CSA 1 with a ribbon (color ribbon is a must with any calibrations). You can also run !SAP 0 for card sensors !SAP3 for mag encoder card sensor. !SAP 1 for ribbon calibrations. if all else fails, you can manually set the ribbon by using !CSA 5 70 120. Please remember these commands are for genuine zebra I Series printers, and that they are case sensitive, and spaces are present. If none of the above corrects the issue you may need to replace one of the three sensors, the daughter board, or possibly the main logic board.

Sep 20, 2011 | Zebra P330i Thermal Card Printer

1 Answer

Printer doesn't recognise the color ribbon and print only in mono.


Try !SA command to calibrate ribon and printer, send command from the driver

Oct 07, 2010 | Zebra P330i Thermal Card Printer

4 Answers

My zebra card printer p330 i donbt recognized the colour ribbo YCMK, only detect the mono ribbon


The P330i is not supposed to work with the YMCK color ribbon, you should use the YMCKO 800015-440 color ribbon.

-- The Pros at www.DiscountIDStore.com

Sep 25, 2010 | Zebra P330i Thermal Card Printer

2 Answers

My zebra card p330 dont recognize the colour ribbon, only detect the mono riboon


Try to send the command !SA from the driver. And run the Ribbon calibration

Sep 04, 2010 | Zebra P330i Thermal Card Printer

2 Answers

Zebra P330i Printer not counting the YMCKO ribbon correctly


!RIBLEN - - - - Get number of remaining panels on ribbon
Send the command !CSA_0
Send the command !CSA_1

Jul 16, 2009 | Zebra P330i Thermal Card Printer

2 Answers

What does a Polaroid p85igc card printer use for a full color ribbon? Zebra p330i ymcko ribbon won't work.


The "i"suffix was introduced in around 2005 to try to stop patent infringements on the printer ribbons. They introduced a chip on the spool that feeds back to the printer. The chip has to be the correct coding for the badge of the printer. Zebra P330i printers are essentially the same as Javelin J330i and Polaroid p85igc but have three different part numbers for their YMCKO ribbon. You can run any monochrome ribbon on them because the mono ribbons have no chip.....not much profit for the brand owners. YMCKO however is not interchangeable. Find a Polaroid dealer for the full colour ribbon.

Jul 08, 2009 | Zebra Eltron P310 Thermal Printer

2 Answers

OVERLAPING OF COLOURS.


go to zebra and download the latest firmware and drivers (free).
update the firmware first
turn printer off
then uninstall (from uninstall programs) the zebra drivers.
then install latest zebra driver.
turn printer on

Double click on printer icon, click on properties.
Click on the device options tag, then click on the properties next to tools
Enter "CALB" and click execute - this will re-calibrate your ribbon

First try the CALB, if your current firmware does not recognize it, then you will
need to upgrade the firmware as above.

Oct 30, 2008 | Zebra P330i Thermal Card Printer

Not finding what you are looking for?
Zebra Eltron P330i Card Printer Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

Dave Busselle

Level 1 Expert

54 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...