Question about Samsung DVD-VR357

1 Answer

Pre-recorded dvd won't eject/entire system frozen

I've had my VR357 over 6 months with no real problems. Tonight I was watching a TVonDVD disc and was navigating a dvd menu when the machine completely froze up. It wouldnt't respond to any buttons pushed on the remote or on the machine until I powered it off. I tried to eject the disc, but it is stuck, and now the machine won't pass along the signal from the tv station input or allow output from VHS tapes played to the TV; i.e. when the machine is on, I get no signal sent to the TV, regardless of what mode the VR357 is in, dvd or vhs. I have tried powering on and off for over an hour, but it won't eject the disc -- any suggestions?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Try unplugging the machine so it will reset itself. Then plug it back in. That has worked for me in the past.
pjrsop

Posted on May 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Govideo DVD/VCR combo, vcr side not playing properly and won`t release the tapes.


MAKE THIS TEST AND FIX IT. God bless you

1.
    • 1
Make sure the device is plugged into the household power supply and is switched on if no indicator lights are illuminated on the control panel. Watch for any power-saving technology that can shut the recorder down when it's not being used. Try the "Power" button again.
    • 2
Verify that the media you are using is compatible with the device. Most combos record to DVD-RAM/-R/-RW/+R/+RW Discs on the disc side. VHS cassettes can have erasure tabs, so check that the tab is still there if you can't record to the cassette. Watch out for copy-protection technology on either the tape or disc. Often it's indicated on the packaging. Copy protection is designed to stop illegal reproductions, so may block many recordings of copyrighted material.

    • 3
Connect a television to the "Video Out," "S-Video Out" or "Component Video Out" jacks on the DVD-VCR combo if you can't see video from the combo playing on the television.
    • 4
Forcibly eject a disc if it is stuck in the combo. Often, manufacturers will create a sequence of buttons to use that accomplishes this. On a Panasonic, you force the combo into "Standby" by pressing "Power" for 10 seconds. Then press and hold "Stop" and the "Channel Up" button together for five seconds, and the disc should eject.

Oct 30, 2013 | Televison & Video

1 Answer

I just purchased new blank Maxell dvd-rw 4.7gb/2hrs. discs and they wouldn't initilize past 8% so I tried re-formatting the disc and now the machine won't recoginize the disc or any disc, even...


Get a CD/DVD laser lens cleaner - the kind with optical quality brushes sticking out of the bottom of the disk. Run this in the player/recorder a couple times. Should clear it up.

You can get them at Best Buy, Radio Shack, online, etc...

Jun 16, 2011 | Emerson EWR20V4 DVD Recorder/VCR

1 Answer

Jvc dr-mv78


The laserunits in some JVC sets are verry bad,for some sets there are updated units available incl software.

Aug 27, 2009 | JVC DR-MV7 DVD Recorder/VCR

1 Answer

My dvd recorder (model DMR-EZ47V) says no disc, and won't open up the dvd tray, even though no disc is in it. It initially froze up after I watched a dvd-rw that I had recorded with the unit, and it would...


Panasonic, who has always put a real, live, English-speaking person on the phone with me within seconds of dialing, quickly figured it probably needs service.  They are sending me an order to send it in to one of their service centers.  They just needed my serial number.

Jul 24, 2008 | Panasonic Televison & Video

1 Answer

DVD Tray will not open


I purchased this unit back in Mid November to make DVD's of my kids old VHS tapes. To date I have probably have made 400 DVD's. Sunday we came home from being gone all day and the unit was locked up. I tried the reset button, unplugged the unit etc to no avail. I unplugged the unit all Sunday night and looked at it again on Monday morning. I was ready to take the unit back to Best Buy and the unit ejected the DVD and has worked for 2 days (Recorded another dozen DVD's). Tonight while reading the paper a message came on my monitor that there was a problem with the disk and instructed me to push the "enter" button which shut the unit off and was suppose to recover the disc. The recorder is now locked up again. A number of 000000's flashes accross the display and the unit constantly cycles off/on. So it is trying to recover but is obviously not being successful. I am going to try the same thing tonight. I am not sure if I have a bad set of blank DVD's. They are Sony -DVD R, same ones I have been using all along. I do remember having this "Error" message when I first started this project and I had to unplug the unit to resolve but it didn't lock up and I haven't had any issues until Sunday. Seems like something in the software is screwed up. It is frustrating that there doesn't seem to be a manual way to eject the disk??!!

Jan 07, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

3 Answers

Lite On LVW-5045 DVD Recorder - won't record onto disc


Liteon lvw 5045 problem action failed.please consult our customer service for recovery. (error code: 0x810D0004)

Dec 11, 2007 | Lite On LVW-5045 DVD Recorder

1 Answer

Not reading pre-recorded dvd's and ocassionally not re-wrtten dvds


Over recent months my recorder has stopped reading pre-recorded disc's and more requently re-writer disc's. I had thought that the region had some how been altered, but not too sure now. Is there a way of checking? Or is there a problem with the laser block. I have stripped the machine down and thoroughly cleaned (but no dust found) and no loose parts. I have reset to manufacture default but this hasn't helped.
postsolution.gif Post Solution addwq.gif Work Queue -->sameproblem.gif Have the same problem? --> Have the same problem? Click Here
X This Problem has been added to the Share Your Expertise Page under "My Work Queue". OK 1 Other User Has The Same Problem Comment by Guest, posted on Dec 19, 2007 DVDR70-051 recorder functions generally becoming more and more erratic. DVD-RW discs I have recorded sometimes say 'disc error' sometimes 'no disc' sometimes start ok but cycles round and round for 5 - 10 mins before stopping, sometimes goes straight into play at last position, won't stop back in menu just goes straight to stndby. Factory reset dosn't help. Wont play pre-recorded discs without going into menu and messing around. It seems to damage or not record RW discs properly a lot of the time. Not even sure if it's resetting to factory settings properly.

Oct 28, 2007 | Philips DVDR70 DVD Recorder

1 Answer

Movies on my recorded discs freeze after a few minutes of play


Sometimes this unit gets "confused" - not sure why -- but try first using a CD cleaning disk and let it start and stop a couple times (sometimes lens gets dirty and does this) - if that doesn't help then try unplugging unit and leave unplugged (from wall socket) for about 30min then plug in, set local time and then see if the disks play okay - sometimes this "resets system"

Jan 20, 2007 | Emerson EWR20V4 DVD Recorder/VCR

Not finding what you are looking for?
Samsung DVD-VR357 Logo

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...