Question about Dell E176FP 17" LCD Monitor

1 Answer

No signal The monitor keeps saying it cant get a signal.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 666 Answers

This is most likely a problem with your graphics card or port if the computer may have been jostled or nudged
the graphics card could have been knocked out of ts slot try to make sure the card itself is seated properly and than to be sure its the monitor attempt to hook another monitor up to the computer if it works its the monitor if not its the graphics card and would require a technician to attend to it most likely

hope this helped
please leave feedback
thanks
Robb

Posted on Apr 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does it keep "saying" out of range?


if camera and base are within a few feet of one another does it have a problem obtaining a signal (syncing ) ?? as if it works ok then there might be a object that is getting in the way of the signal , radio waves move from its transmitter (camera) towards its receiver (monitor) in a straight line , if there is too large a mass in the way then the radio wave can't penetrate it and will be "lost" also ck both the camera's and bases battery levels (if they have one) for proper peak power level , as it takes energy to drive the radio signal towards its receiver .

Feb 09, 2016 | Summer Infant Secure Sight Handheld Color...

1 Answer

Cant get tv set up to virgin keeps saying no signal


Check and replace its tuner. Check all connections for firmness.

Mar 31, 2013 | Hannspree Televison & Video

2 Answers

No signal to monitor


Check ALL cables, connections, try another monitor/cable. You didn't provide the Model of eMachine? Does it have a PCI Graphics Card? Reseat Card.

Jan 05, 2013 | E-Machines eMachines Desktop PC

1 Answer

My monitor keeps saying "no signal". I confirmed


No Signal on your monitor says it is not receiving a signal from your computer... this could be:
1) the cable is bad
2) the cable is not plugged in firmly
3) your monitor is set to a different source (such as VGA or HDMI) and simply needs to have the option set.
4) the video card or onboard video electronics have failed.

Suggestion: If none of the above seem to be the problem, and if your computer AND the monitor have a VGA connector AND you have a VGA cable. Try that. If that works, its a strong indication that the DVI circuits have failed either in your monitor or in the computer's video electronics.

Aug 28, 2017 | Envision 19" Widescreen Flat Panel TFT LCD...

1 Answer

Keeps saying "no signal -


I'm not sure what you are plugging this into, or through what type of connection; but if it is plugged into VGA make sure none of the pins are bent on either side of the cord, also make sure it is set to pick up the signal from the right input. If you need anymore assistance with this please let me know.

Apr 11, 2011 | Planar PX191 19" Flat Panel LCD Monitor

1 Answer

Monitor is saying no signal


Most times when pc boots up and you have this message it can be 2 things. Video card or the card driver it self. If you boot into safe mode by restarting and keep on pressing F8 key it should give you advanced system start up. If you cant see this you have to try installing different video card unless you want to try to reinstall your OS but you will loose all the data of the pc. You can find pretty cheap video cards in any store that has pc stuff like walmart or bestbuy. Good luck.

Apr 06, 2010 | Everex DESKTOP PC EVEREX | GPC TC2502 RTL

1 Answer

Gateway FPD1760TFT LCD monitor


Problem
1. turn on computer
2. monitor receives signal, it looks like its working
3. it goes through some steps and then the monitor says "no signal" and kind of stays in limbo with fans running, etc.

Solution
One possibility is that computer is looking for drivers for you video card. It could be hung up looking in the wrong places. Remove all peripheral hard drives and memory sticks. Try again.

Jan 12, 2009 | Gateway FPD1760 17" LCD Monitor

1 Answer

When i turn my pc on it tells me in a blue box no signal but the pc keeps running but i cant see anything i bought a new graphics it still doesn't work i bought a new monitor still doesn't work


The No Signal thing is your monitor saying it doesn't have anything from the PC to display; the PC has nothing to do with that.  Try refitting the card to the PC to make sure it's in there right, and if your PC boots then you should see something (especially if your cables are all plugged in right and your monitor is paying attention to the interface the PC is on, not some other source it could be fed (e.g. SVHS, composite, DVI-D...)

Jul 31, 2008 | Computers & Internet

3 Answers

Monitor saying no signal


check the Pins in the monitors serial port and make sure all are straight 15 of em

Jun 03, 2008 | Computers & Internet

1 Answer

Acer monitor lcd


no signal means there is no communication between your monitor and your system unit.check and be sure your monitor signal cable is firmly connected,if nothing happens, try the monitor on your friend's system.if no change then try and replace the monitor signal cable, eyo7 eyoifiok2005@yahoo.com

Feb 28, 2007 | Acer Professional P211 21" CRT Monitor

Not finding what you are looking for?
Dell E176FP 17" LCD Monitor Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...