Question about Canon Pixma MP500 All-In-One InkJet Printer

1 Answer

Black ink will not print. Replaced both black inks. Did deep cleaning

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,041 Answers

Hi There

Summary

Usage of compatible ink and leave the printer idle too long may cause printhead clogging
What should you do if you get this problem. Relax; you may recover the printhead by unclogging it. Follow these steps to unclog the printhead

1. Right click in the printer driver name
2. Select Properties menu
3. Click Maintenance tab
4. Click on cleaning sign for regular cleaning. Perform this up to 3 times.
5. If this does not work, perform Deep Cleaning

And if that not work

Some times it needs a good clean up but this is up to you if you want to do this,
But after you done this prime the printer so it gets the inks back in the heads, it may take a little time for the inks to work.

Ok.

There is fluid cleaner for this but I can never find any in the shops the only ones I seen is when they sell them in Tesco but they come in with the ink refill bottles so I just use worm water by it self on a cloth and dabbing on the heads to clean them, it will not harm the heads but not to much water.

Some heads are on the inks them self but some have them inside the printer so I not know your printer so if the heads are inside you need to get them out you may find that some heads will just clip out put some need to be unscrewed so you got to know how they come out so be careful and not push to hard on them, if the heads are on the ink then it is a easy job to clean them,
It worth a try it worked for me more than ones.

Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

Posted on Apr 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When printing text in black ink, some lines of the text are missing. I've tried doing a deep cleaning 4 times and replaced the black ink cartridge. Have also tried unplugging unit, but that didnt help...


You didn't mention what printer was doing this. HP, Lexmark, Epson? It sounds like your print head is clogged with dried ink. If you can remove print head you can sit it on a damp cloth with the nozzle of the print head in contact with the damp cloth and hope that the cloth will draw out the dried ink.

Feb 11, 2011 | Office Equipment & Supplies

1 Answer

Black ink cartridge holder not working , can not print with black ink cartridge holder, when i use the colored ink holder printer works ok


The problem you are describing is with the black ( BC-10 ) print head and not with the printer.

1. Check your black ink tank and be sure it is not dry.

2. Run the printer through one DEEP cleaning cycle and see if that improves the print.

If your black ink tank is full, and the deep cleaning cycle produces no improvement, you will need to replace the BC-10 print head.

Mar 11, 2010 | Canon BJC 85 InkJet Printer

2 Answers

Replaced black ink, now it only prints in color -


If cleaning doesn't help, you may need a shop, there's a firmware update that helps with black printhead cleaning, try a couple of deep cleans first, you can select just black deep cleaning.

Sep 10, 2009 | Canon PIXMA iP90 Mobile Printer

1 Answer

After replacing black ink cartridge, black ink will not print


check the cartridge contacts in the printer \
a lot of time they geet covered in ink this will not allow the cartridge to print properly and cause headaches
clean with a baby wipe or a paper towel with soap on it
dry thuoly with hair dryer and try again

Aug 03, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Black not printing, other colors fine, replaced cart and deep cleaned several times, no result


Assuming genuine ink cartThis worked for me on a HP printer 1.Try print black text ,and run many copies black only. I ran 25x12 times still no black. Run head clean after about each 50 sheets. Persevered and finally BLACK ink OK
Good Luck Inkypete

May 01, 2009 | Canon PIXMA iP3500 Printer

1 Answer

The black ink will not print on my canon pixma ip4200


printer head problem remove ink put about ten drops of alcohol in where the ink goes in run clean cycle ten times

Mar 29, 2009 | Canon Office Equipment & Supplies

1 Answer

Deep Cleaning an Epsom Stylus DX5050


check the black ink level may be its already used up. It needs to be replaced. Ink is consumed during cleaning. Try to replace with a new one. all in one printers does nit print if 1 ink is lacking.

Nov 28, 2008 | Epson Stylus 830U InkJet Photo Printer

Not finding what you are looking for?
Canon Pixma MP500 All-In-One InkJet Printer Logo

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1924 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...