Question about Extended Systems Pocket Print Server

Open Question

ESI-2831 Hi. I'm looking for the software for ESI-2831. Do you have it?

Posted by on

2 Suggested Answers

SOURCE: ESI-2831 Drivers missing

Here is a Manual. As for the drivers came up short on them sry. www.nls.com/common/pdfs/v307n10.pdf

Posted on Aug 08, 2007

SOURCE: ESI-2831 Drivers missing

What kind of program is it?

The device is configurable through telnet on any windows or linux or dos pc.

regards,

Werner.

Posted on Jan 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset ESI 2833 until red light turned green. Network Printer still not responding


Check the IP Address of the 2833. I believe there is a gray button you can depress to print out a configuration sheet. If the wireless modem was also your router, you may have a different IP address range and will need to set the 2833 accordingly.

Sep 03, 2013 | Extended Systems Pocket Print Server

1 Answer

I need a AC Adapter Kit for the Extended Systems PocketPro Print Server ESI-7000RX


Some are proprietary and can only be obtained from the manufacturer or dealer. Go to their web site and look at the accessories available.

Mar 06, 2011 | Extended Systems PocketPro Print Server

1 Answer

I have an extendnet sx ESI-2811 Print Server. It doesn't work and I can't ping it when directly connected to my laptop via ethernet cable. It must be broken. Any ideas?


Use a crossover cable to connect laptop directly. Does your print server have a static IP address and do you know what it is? If yes, set a static IP on your laptop that is in the same subnet and with the same mask, then you should be able to ping it. If the print server is obtaining an IP by DHCP, you will have to set up and run a DHCP server on the laptop (or connect it with a straight-thru cable to an existing router that offers this service).

Jun 21, 2010 | Print Servers

1 Answer

How to reset Pocket Print server Extended Sys ESI 2833?


Disconnect the power. Press the small test button and keep it pressed, while you reconnect the power AND wait until the green LED is on again.

Dec 05, 2008 | Extended Systems PocketPro Print Server

1 Answer

ExtendNet Pocket Printer ESI-2841 - Link Light fails to come on.


Did you connect it hrough a swirch with a network cable, or to a pc with a crossover? It is not a smart adapter, can't do midi or tx.

Oct 31, 2007 | Troy ExtendNet SX Print Server

3 Answers

ESI-2831 Drivers missing


Here is a Manual. As for the drivers came up short on them sry. www.nls.com/common/pdfs/v307n10.pdf

Apr 19, 2007 | Extended Systems Pocket Print Server

1 Answer

Can't find printserver on the network


Most Print Servers are by default on DHCP and if the PS is still on its factory defaults, it won't get an IP address because your computer won't have a DHCP server (unless u have set up one). Now, you can ask the person you got it from if he had ever assigned a static IP Address to the PS. Also, one of the reasons why your laptop won't detect the PS might be a software firewall installed. Please revert back with any other questions or observations. good luck

Mar 23, 2007 | Extended Systems Pocket Print Server

1 Answer

ESI-2833


User: admin Password: extendnet

Feb 21, 2007 | Extended Systems PocketPro Print Server

2 Answers

Cannot find print server at all


How this works: Restoring the PocketPrintServer to Factory Defaults In most cases, the best way to restore the PocketPrintServer to factory defaults is through "telnet". However, if you are unable to connect to the device because of a configuration error, use the following method which does not require a network connection. To restore the PocketPrintServer to factory defaults, complete the following steps: 1. Disconnect the PocketPrintServer from the network and power cycle it. When it powers up, the LED will rapidly blink orange for five seconds. 2. Power down the device during the rapid orange blink period. Power up the device and power it down during that orange blink period two more times. 3. Reconnect the network cable and power up the PocketPrintServer. It will have restored itself to factory defaults and will rapidly blink green as it searches for a RARP or BOOTP server to find an IP address. Gleaning If an IP address has not been permanently assigned when the PocketPrintServer is powered on or reset, it will look for a "ping" packet on the network. If the PocketPrintServer receives a "ping" packet within two minutes, it will accept the IP address in the "ping" packet as its own address. To use Gleaning, you must have super-user privileges on a UNIX system. Gleaning also works under Windows 95 and Windows NT. 1. Add an entry in the ARP table that assigns an IP address to the Ethernet address of the PocketPrintServer. To do this, use the "arp" command. arp -s temp Example: arp -s 192.168.42.24 00:02:16:00:00:01 temp 2. Start a continuous "ping" to the PocketPrintServer. ping Example: ping 192.168.42.24 On some systems, this may require an additional parameter. Some implementations of "ping" only send out one "ping" packet which could get lost in transit. Check your system documentation for more information. 3. Connect power to the PocketPrintServer. The PocketPrintServer will "glean" its IP address from the "ping" packet. This IP address will remain in effect until the PocketPrintServer is power cycled or reset. Therefore, a permanent IP address should be assigned by running the ExtendView TCP/IP utility or via "telnet".

Jan 30, 2007 | Extended Systems Pocket Print Server

Not finding what you are looking for?
Extended Systems Pocket Print Server Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Extended Systems Print Servers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

old marine
old marine

Level 3 Expert

1454 Answers

Cindy Wells

Level 3 Expert

4751 Answers

Are you an Extended Systems Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...