Question about Samsung SyncMaster 2233BW 22" LCD Monitor

1 Answer

MONITOR WON'T TURN ON

MONITOR WONT TURN ON. BLUE BUTTON SLOWLY BLINKS.

Posted by on

  • frankdanfelt May 11, 2010

    Are you sure its receiving a video signal from the pc?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

More likely to be in the power supply section.
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague

http://www.badcaps.net

Posted on Apr 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help me, dish network hd monitor,model 34-310. made in 2004. wont turn on,on button blinks and attempts to,turn on but screen remains blank. tries three times and blinks a green light. no picture,no sound....


It is the right age for failure---IF you are able look inside at the power supply for bad caps---I will attach photos of what to look for.

The three tries is what is called a three strikes and you are out (no joke)----the unit has built into it (many do) a feature where it will try 3 times to make it up and on and if fails shuts down or stops trying.


12_7_2012_3_05_35_pm.jpg12_7_2012_3_05_53_pm.jpg

Dec 07, 2012 | Computers & Internet

1 Answer

How do I turn it on


Hello.

To power on the Gateway VX750, press the power button on the front. The power button has 3 sides with a "G" in the middle.

The LED indicates the power status of the monitor.
  • Not lit - The monitor is turned off or does not have power connected.
  • Blinks one time and then goes off - The LED blinks one time when the monitor's power cord is plugged into an AC outlet to indicate that power is detected.
  • Lit solid blue - The monitor is turned on and active.
  • Blinking blue - The monitor is in power saving mode. Before entering power saving mode, a message briefly appears.
Hope this helps.

Aug 12, 2010 | Gateway VX750 (Black, Platinum) 17" CRT...

1 Answer

My monitor does not turn on and the power button light keeps blinking ... <my Gateway monitor light blinks blue slowly but the screen is blank


This is usually a sign that there is no signal going to your monitor, check all your cables and then reboot.

Jun 28, 2010 | Gateway FPD2275W LCD Monitor

1 Answer

VL 1919 power button blue light blinks and screen


Yea I fixed it ..bought a new monitor......I tried the old monitor on two other PC's same problem.....

Nov 23, 2009 | Computers & Internet

1 Answer

Power button blinks slowly and machine wont turn on


does it make any beeping sounds? try unplugging all peripherals like keyboard, mouse, usb devices etc, just leave the monitor and power cords and try powering it on again. If it is beeping give me the number of beeps and frequency.


Aug 08, 2009 | eMachines Computers & Internet

1 Answer

Computer power button for the monitor blinks blue


there are two reasons for this to happen there are blown capacitors inside the monitor and or there transistors on the board that have failed. both can be repaired.

Feb 25, 2009 | Proview PL926WBi 19" LCD Monitor

1 Answer

Apex Digital 19" LCD wont turn on green light blinks


you can have a electronics repair done on this unit call 719 687 6997

Jan 14, 2009 | Apex Digital AVL2076 20 in. EDTV-Ready LCD...

1 Answer

I have a Dell flatscreen monitor that will not turn on. The power light blinks blue slowly


Hi...there,
It's seems you got a busted backlight inverter. If you still under warranty send it back to Dell for repaired. Happy Holidays!

Dec 18, 2008 | Dell UltraSharp 2005FPW 20.1" LCD Monitor

2 Answers

Dell P1110


Hi, The part where you see some color bars and blinking green led is what we call MONITOR SELF TEST. A diagnostic pattern consisting of four colors (red, green, blue and white) appears, and the LED flashes slowly. this happens when signal cable from the monitor is disconnected from the tower and leaving the power chord for the monitor plugged in. If the monitor works properly on a different computer. then its a problem with the computer's video card sending out signal. im 85% sure that its a problem with your video card.

Oct 02, 2007 | Dell UltraScan P1110 21" CRT Monitor

Not finding what you are looking for?
Samsung SyncMaster 2233BW 22" LCD Monitor Logo

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

kakima

Level 3 Expert

102366 Answers

phoenix chi
phoenix chi

Level 2 Expert

389 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...