Question about Tecumseh Lawn Boy Push Mowers Insight Silver Powered Series - Sens - A - Speed Walk Behind Mower - 10685

Open Question

Need details on connecting governor linkage to carb

Lawn boy 10313

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2239 Answers

SOURCE: speed of the lawn mower governor is missadjusted

The engine revs are turned down to make the machine noise compliant, increasing the revs will greatly increase the noise, the engine revs shouold not realy be increased, however a dealer with a suitable engine taco may do it for you, it is very important not too over speed the engine or it will self destruct,

Posted on Apr 11, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a throttle linkage diagram for a briggs & stratton engine model 9S502 type 0620-B1


David, This is what I found in google search for B&S carb. linkage diagram, you can also do a search because there are lots more.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Linkage Spring replacement on Briggs Stratton Quattro 4 HP Murray Lawn...
Repairing Lawnmowers For Profit Part 61 Governor Spring Help
briggs and stratton governor linkage diagrams Google Search
briggs and stratton carburetor linkage diagrams Google Search

Jun 10, 2016 | Briggs & Stratton Garden

1 Answer

Why does my huskee push mower rev so high and stays at a high idle i have checked carb and cleaned carb.


Hi Alexander:
Could you try to check around the carburettor linkage to see if there is a spring hanging loose. A lot of these mowers have a governor (like a wind vane) that maintains engine speed. It is connected to the carb by a spring. If the spring has come off, or if the linkage is sticky from dried grass or whatever, the engine RPM will give you grief.

Jun 20, 2015 | Garden

1 Answer

LAWNMOWER ENGINE RACES BADLY - HOW DO I FIX IT


Sounds like your governor linkage and or governor control fan arm " most small engines have them to control over speed" is binding or maybe has dirt and grass built up.. Or the return spring is disconnected. Once it starts to race manually move the governor linkage back an let go see it it stops racing.. Then release if it races again..check the spring if connected...you must check the governor fan it is located under the top housing..it uses the engine fan calling air to slow the engine when over speed occurs by pushing the governor linkage back to slower speed.. Check it out...good luck..

Apr 25, 2015 | Garden

1 Answer

Governor reset


Are you asking how to reset governor linkage to factory spec? If so, move governor arm in direction that opens throttle valve on carb wide open. Hold in this position. Loosen small nut on bottom of governor arm. With a needle nose pliers turn center arm that goes into engine in the same direction you turned governor arm to open throttle valve. Holding in position, now tighten nut on governor arm tight again. This is referred to as a static setting and is factory spec. Good luck!

Sep 21, 2013 | Yard Machines MTD Gold 20 HP Lawn Tractor ...

1 Answer

I have a craftsman tecumseh 4.5 hp mower throttle free type and i have cleaned and rebuilt the carb replaced the carb mounting gasket between the carb and intake and also replaced the o rings on the...


1ec7ba32-45ac-4b07-8389-f863014e42da.jpgIt still sounds like a carburation issue. Are you sure all jets, vents and ports in carb are open? Another possibility is that the governor setting is off. The governor is the rod that comes out of side of engine and connects to throttle linkage on carb. To set governor to factory setting, push governor linkage in direction that opens throttle valve, loosen screw on governor arm and turn rod in same direction until it stops, while holding in this position tighten screw on governor arm. This is called a static setting. If this doesn't work I would disassemble carb, remove all plastic and rubber parts and soak in carb dip overnight. Picture may be different from your unit but it shows governor linkage to carb. Good luck and happy wrenching!

Sep 18, 2013 | Garden

1 Answer

Lawn mower


the cable hooks to a lever that is connected to the governor, the gov. is the shaft comes out of the side of the block, rather than the carb. in turn the governor has a linkage that goes back to the carb. to regulate the engine RPM.

May 27, 2013 | Garden

1 Answer

Engine is surging after warmup on a BS 4 hp, no carb adjustment


This problem may SEEM carb related, but it is probably a result of bad linkage to the governor (controls engine speed) and may mean the governor needs adjusting (easy) or the linkage to the governor is stretched or not connected properly.

Aug 16, 2010 | Briggs & Stratton Garden

1 Answer

Governor and Carb spring linkage


the solid wire link goes from the top hole in the governor rod to the carb and the spring goes from the lower hole on the rod to the throttle plate where the cable attaches

Nov 01, 2009 | Troy Bilt 5.5hp Self Propelled Mower

3 Answers

MOWER WILL NOT RUN AT FULL POWER .


try empting the feul tank and put fresh feul in with a little dry gas treatment if that dont work try getting some carb cleaner in a spray can start mower and gingerly spay into carb trying not to over flood it keep spraying untill running smooth change CRANKCASE OIL and AIR FILTER.

Apr 25, 2009 | Mtd Yard - Man 160cc, 21" Self - Propelled...

Not finding what you are looking for?
Tecumseh Lawn Boy Push Mowers Insight Silver Powered Series -  Sens - A - Speed Walk Behind Mower - 10685 Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tecumseh Garden Experts

Mike Squire

Level 2 Expert

391 Answers

itsman

Level 2 Expert

89 Answers

Rick Oudette
Rick Oudette

Level 1 Expert

25 Answers

Are you a Tecumseh Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...