Question about GE Profile Spacemaker Over-the-Range Microwave

1 Answer

I have a GE microwave and F3 has just come up on the display screen???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

F3 Shorted key panel (touch pad).
1. Will occur if a shorted key panel is detected continuously over 60 seconds.
2. Replace key panel (touch pad).

What you can first try before replacing the keypad is first unplugging the microwave. Then you can get access to the panel by first removing the top grill and then unscrew the top of the control panel. There is a strip that looks like tape which attaches to the control panel which you need to wipe off and then blow dry. may not work the first time but be patient. also clean the bottom of the door and the latches to make sure the connection is clean. After that is should hopefully work without replacing the touch pad.

Let me know how this works out for you.

Benjamin

Posted on Apr 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My GE microwave is beeping and the display says F3


F3 on a GE / Hotpoint microwave means you have a shorted membrane keypad.

We would need your model number to give you more specific info, part ordering info, and en estimate if needed.

Simply contact me here with your model number and symptoms for free help.

On some models, the membrane keypad is peeled off and a new one stuck on.

In other models, the plastic frame must be replaced, and it comes with a keypad already installed.

May 12, 2011 | General Electric Microwave Oven

1 Answer

GE Microwave displaying --F3--


F3 on a GE / Hotpoint microwave means you have a shorting keypad / controls.

There's a chance it can come on by itself and run unattended, which can result in a fire.

So until it is repaired, please leave it unplugged or leave the door open.

On this model, the keypad is not available as a separate part, so you would have to replace the entire controller assembly.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Then you disconnect the wires and install the new controller.

You can order part number WB07X10903 here for $114.37 (compare that to $174.75 direct from GE!).

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jun 24, 2009 | GE Microwave Ovens

1 Answer

F3 flashing on display screen..no buttons work!


I have the same problem. However when I unplug the microwave from the wall outlet, let it sit for 10 seconds, then weird codes appear on the top line. Reset the clock and it shold work just fine.

zayd4@aol.com

Apr 28, 2009 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

F3 Error Message


the code means this.


F3 Shorted touch pad panel

Good Luck

Dec 29, 2008 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Spacemaker beeping loud and f3 message driving us crazy


The error code F3 indicates an oven sensor problem. The oven sensor is most likely the failed part. The oven sensor probe must have the correct resistance readings at specific temperatures. When the electronic range control (ERC) cannot identify the correct resistance of the oven sensor or the resistance is way out of specs F3 will display.
I recommend calling a service technician to diagnose and repair your oven.

Dec 18, 2008 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

GE microwave f3 code


You have a shorted touch pad.. here is a link for a replacement.. http://www.pcappliancerepair.com/model-display.php

If you open up everything and examine the touch pad, you may see something that is causing the short and fix it, oherwise, you'll have to remove and replace it.. Hope this helps..

Sep 12, 2008 | GE Spacemaker JVM1640SJ Microwave Oven

2 Answers

F3 Error Message


It needs a new key pad it is shorted the ge website has a list of error codes f3 is the keypad

Jan 31, 2008 | GE Advantium 120 Convection/Microwave Oven

Not finding what you are looking for?
GE Profile Spacemaker Over-the-Range Microwave Logo

458 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Microwave Ovens Experts

D. E. Hev

Level 3 Expert

1167 Answers

 Larry
Larry

Level 2 Expert

115 Answers

Shekar Avadhani

Level 2 Expert

61 Answers

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...