Question about Washing Machines

1 Answer

My hoover elite 1210 washing machine leaks with every load - overloading is not happening it even leaks on small loads. has never been serviced what service could we do on it to fix the problem?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Washing Mach... Master
  • 713 Answers

Could b drain hose, pump or main seal. could also b tub to pump hose. u need to find the leak first to repair it. does your machine have 3 screws holding the front panel to the frame or can u look underneath and see the pump.the screws r down the bottom at the front. please reply 4 more help.

Posted on May 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Machine indicates out of balance


This usually occurs if the washer is overloaded. If this has happened with washing in it then just put your hand in and readjust the washing and start again.

Also make sure the washing machine is level under empty load. Adjust the levelling screws if necessary.

Aug 15, 2014 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

My Hoover Elite 1210 toploading washing machine seems to make a horrible off balance sound on the spin cycle - even when there is a small load on. What can I do to fix it?


Could be bearings or more likely the concrete weight at the bottom of the drum is loos give it a shake from under to check...Good luck

Feb 09, 2011 | Hoover Washing Machines

1 Answer

Kenmore elite front washer show code cl? How do i fix it


The CL fault indicates that there was an instantaneous current spike of 26 amps at the motor windings in the washer. This could be caused by overloading the washer. It can also be caused by problems with the drive motor, thermal protector or the motor controller.

You should have been able to clear the display by pressing the STOP/CANCEL button.

If you try running the washer again and continue to get this fault code even with a small or medium load, I recommend calling a service technician to diagnose and repair the washer.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 29, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Error code CI


The ?Cl? fault indicates that there was an instantaneous current spike of 26 amps at the motor windings in the washer. This could be caused by overloading the washer. It can also be caused by problems with the drive motor, thermal protector or the motor controller.You should have been able to clear the display by pressing the STOP/CANCEL button.
If you try running the washer again and continue to get this fault code even with a small or medium load, I recommend calling a service technician to diagnose and repair the washer.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 26, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Washer will overfill on small load and large


If this happens only on small load cycle , then it can be a faulty timer board.

however check also the water level switch, when there is overfilling this part is always the first suspect.


May 21, 2009 | Kenmore Elite 21082

1 Answer

Bad vibration during spin


Good morning! It's common to a washing machine to go out of balance everytime we exceeded the prescribed capacity load (as indicated in the enclosed manual upon purchase of the unit). the fitted new pump is not the source of such problem. Please try to review the manual of your machine and take note of the required capacity load which I think should not exceed 6kg. Best regards.

May 02, 2009 | Washing Machines

1 Answer

Kenmore HE 3t started leaking from the side when filling


check dispencer and make sure its not cracked,,if not turn your water pressure down to the dispencer its splashing up and over running down..keep me posted onthejob

Jan 12, 2009 | Kenmore 3.8 cu. ft. HE3t Front Load Washer

1 Answer

Hoover elite 1210 won't progress to the final 'spray and spin dry cycle'.


Hoping to be of help after the spin dry wouldnt work on our hoover elite 1210.
It would do the wash cycle fine but as soon as it needed to drain, it wouldn't.
My handy man (Husband) is great at fixing things and opened the front panel by undoing the screws.
Near the motor on the bottom left, there is a wheel/fan looking thing.
(Turn the machine off first)
He tried to spin the wheel but it would only move clockwise and not anti-clockwise like it is supposed to.
So he gave the fan a few spins clockwise before giving it a gentle pull outwards in which it loosened the wheel and was able to move anticlockwise again.
We then turned the machine on and it started spinning and draining the machine.
This machine is a work horse and I refuse to get another. They don't make them like they used to!!
Mine has a leak and we use a drip tray underneath at the moment. So long as it works. I am happy.
Hope this helps someone else with the same problem.

Sep 21, 2008 | Hoover Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Brad Brown

Level 3 Expert

15628 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...