Question about Whirlpool Duet GHW9150P Front Load Washer

2 Answers

How do I unlock the controls on the washing machine. Control Locked light is on and I am unalble to start machine,

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,911 Answers

The Control Lock is a safety feature that enables the consumer to lock the control panel to prevent small children from manipulating the controls and accidentally starting the appliance. This can usually be reset and does not require a technician.

With the lock on, the control panel is disabled and you cannot use any of the controls, except the button to unlock it. It can inadvertently be set following a power outage, leaning against the control panel, or pressing and holding the wrong button. This is usually not an indication of a malfunction.

If this is a Whirlpool manufactured front loader, the following link explains how to lock/unlock this feature:

http://www.fixya.com/support/r3608801-control_panel_lock


These instructions are also printed on the front panel of the appliance and in the owner's manual.

If this does not correct your problem, then you may have a more serious problem than a simple operator control button issue (such as an operator console problem or main control board issue). Please post back and let me know if you need further assistance. I hope you find this information helpful.

Posted on Apr 26, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 126 Answers

It should say on the front of the control panel.

Posted on Apr 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Controls locked


The Control Lock prevents unintended use of the washer. You can also use the control lock feature to prevent unintended cycle or option changes during a cycle. When CONTROL LOCKED is lit, all buttons are disabled except for Pause/Cancel and Start. You can lock the controls while the washer is operating. To lock the controls: Select and hold DRAIN & SPIN for 3 seconds. The CONTROL LOCKED status light glows. To unlock the controls: Select and hold DRAIN & SPIN for 3 seconds or until the CONTROL LOCKED Status light turns off.

Aug 06, 2012 | Whirlpool AWM9000 Front Load Washer

1 Answer

The "Control Locked" light is


The Control Lock prevents unintended use of the washer. You can also use the control lock feature to prevent unintended cycle or option changes during a cycle. When CONTROL LOCKED is lit, all buttons are disabled except for Pause/Cancel and Start.

You can lock the controls while the washer is operating.

To lock the controls:

Select and hold DRAIN & SPIN for 3 seconds. The CONTROL LOCKED status light glows.

To unlock the controls:

Select and hold DRAIN & SPIN for 3 seconds or until the CONTROL LOCKED Status light turns off.

Mar 31, 2011 | Washing Machines

1 Answer

My washing machine machine is saying control locked


To unlock the controls press and hold the "END OF CYCLE SIGNAL" for 3 seconds until the Control Locked status light turns off then release the button.
richroth_39.jpg

Jan 10, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

On My Whirlpool Duet Model# GHW9150PW A setting kicked on that


Press any of the buttons on the control panel to see if the buttons are operational or check to see if the "Control Locked" indicator light is lit. If the control panel is operational, you may mistakenly lock the door.

Press and hold the "End of Cycle Signal" button for approximately three seconds until the "Control Locked" indicator light shuts off.

May 31, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Control locked how do I unlock?


The Control Lock is a designed safety feature that enables the us to lock the control panel to prevent small children from manipulating the controls and accidentally starting the appliance.

The controls can be easily locked or unlocked by pressing and holding the following button on the front panel:

Whirlpool Duet Washer - Press and hold the END OF CYCLE SIGNAL button for 3 seconds to 10 seconds.

Please do refer this link for a detailed explanation for your knowledge.
http://www.fixya.com/support/t4186517-control_lock_light_machine

Mar 27, 2010 | Whirlpool Duet GHW9150P Front Load Washer

3 Answers

Control is locked


To unlock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds until the
CONTROL LOCKED Status light turns off.

Feb 12, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

How do you get control lock off whirlpool duet washing machine


To unlock the Control Locked feature:

Press and hold the End Of Cycle Signal button for 3 seconds to turn this feature off.

NOTE: When the machine is running and Control Locked light is on, the machine can be stopped by pressing the Pause/Cancel button, but cannot be restarted until the control is unlocked.

Oct 02, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Control locked light is on, machine is currently inoperable.


Push and hold the end of cycle button for 3 sec to lock or unlock control panel. here is the manual if you need.

http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0606218.pdf

Good luck and please rate FixYa!

Apr 13, 2009 | Washing Machines

2 Answers

Unlock control lock in washing machine, whirlpool, duet


Hold control lock for 3 sec. It will make a sound and the door will unlock.

Mar 21, 2009 | Whirlpool Duet GHW9150P Front Load Washer

11 Answers

Whirlpool duet


On the far right sode of the control panel there is a unlock control reset button. Hold it for 3 seconds and the fault will clear.

Mar 18, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...