- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
restart your computer
repeatedly tapping the f8 key to enter safe mode while the screen is black once
in safe mode where the only things working will be your keyboard and mouse
allowing you to attempt to repair your computer you could select the option start
at last known configuration that worked this will tell what file has been
corrupted or missing then select restart if the problem still persists f8 back
into safe mode you might need to select your operating system to load into safe
mode click start control panel administration tools computer management in the
left panel events + to expand then system you will see all errors in right
panel right click select properties this will tell you what has occurred and
the time it occurred you might use the system restore to restore your system to
an earlier time click start all programs accessories system tools you should
see your system restore option hope this helps you
ok you will need to get the windows 2003 drivers for your raid controller and put them on a floppy disk. when you first boot off the cd you will see a prompt to press f6 if you need to install any additional drivers. insert the floppy disk and select which driver you wish to load.
you should be able to see the hard drives now to partition/format.
You might try running one of the live cd distributions to see if the machine hardware is supported that way. You do need a minimum of 128 MB of ram, might be 192 for a live system. It could just be that the system doesn't have enough ram to run Debian, that would explain why it wouldn't finish installation, and why it fails to load now. Check the readme and release notes for minimum system requirements. Maybe you would do better with a leaner distro like DSL?
ac voltage - 1.414 times larger then dc required, through a full or half wave bridge (but not clean) then across a large cap electrolytic say 220uF then keep a load on it with a small tant and a .1uF mono. Will this be clean enough.