Question about Minolta Photography

1 Answer

The zero (0) keeps flashing on my camera, it says 200 at the top which i think is the speed of the film but it wont let me take a picture. the camera is minolta 505si super DYNAX, help please!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 146 Answers

Hello,

This is a bit late but it might help!
The manual says this:
If the film is loaded incorrectly, 0 will blink in the frame counter and the shutter will remain locked.
Open the back cover and repeat the film loading steps.

Good luck.

Posted on May 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Iso led keeps flashing on my eos 10s


clean the iso detect pins in the film chamber, and check to make sure they are not bent

Jan 05, 2013 | Canon EOS-10S 35mm SLR Camera

1 Answer

Fujifilm instax 200 camera will not spit out pictures! :(


Link

Hi,

Camera might be damaged because of the fall, suggest to consult the Authorized Dealer near you (-see above link), or send it back to the store where you purchase it as it may be still part of the warranty.

Thank you

Jul 27, 2010 | FUJIFILM Instax 200 Instant Film Camera +...

1 Answer

How to focus? all my picture not clear?


You have to hold the cam still... if the shutter speed is less than 60 and it doesn't flash you need a tripod. The cam is a focus free and the lens does it all. iF YOU DON'T USE THE FLASH just take pictures in a bright area or keep the film speed setting at 200 and 400 is better to stop the shakes and keep the resolution at 1024/768 that helps too...

Apr 08, 2010 | Vivitar ViviCam 5018 Digital Camera

2 Answers

The camera is flashing a small 0 on the lcd screen what does this mean?


If you can get to the menus, reset all to factory settings as much as you can. Then test it to see how it reacts.

Oct 19, 2009 | Nikon Coolpix 4300 Digital Camera

1 Answer

The flash is not very brightthe test button fire the flash just fine..but when i fire it when i take a picture the light is very weak


Are your pictures properly exposed?
Does this flash have power settings on the back? If so, move it back to full power.
If your pictures are properly exposed then its doing what its supposed to.
If no power setting on the back, check what ASA you have it set for. 800 or 1000 speed film requires much less light than 200 speed film. Adjust ASA based on your film.

Sep 19, 2009 | Sunpak 355-AF for Minolta Flash

1 Answer

Black line across top of all my developed pictures


You have light leak somewhere to the film.
Usually from the bad film door seal.

Mar 29, 2009 | Canon EOS Rebel GII with 35-80 lens 35mm...

1 Answer

Film problem for my holga


Black film as in underexpose, after you have them printed?

If you open a roll of 120 film:
Remove the little tape holding to the film.
Place film onto Film Spool Studs.
Pull film out from film leader and thread to Take Spool.
Turn until Arrow Line on film aligns with Start Mark of Film Holder.
Close film cover or back.
Advance camera to Zero (0). Now you are ready to shoot.
Just rememer what film speed your are using.

Hope they are helpful.

Truly,
atdlee@netzero.com

Dec 31, 2008 | Holga Flash, 120 Medium Format Camera...

1 Answer

My Cannon Rebel EOS 35mm film Camera is producing blank Film


If you are getting some photos where only part of the image is visible, then I suspect that they were photos where you used a flash.

Cameras have a specified maximum shutter speed for use with a flash, this is called its 'sync speed'. This is the fastest speed that the camera will need to open the lead shutter and close the trailing shutter in order to expose the entire surface area of the image and have it evenly lit by the flash unit. If you shoot too fast of a speed, then the shutter will only be partly completed its exposure and you'll get a photo with only part of the image showing. The faster the speed past the sync speed, the less the resulting area of the image. Most cameras will have a sync speed of 1/250 or less. I think a lot of the Rebel models are 1/90 - consult your manual.

Nov 23, 2008 | Canon EOS Rebel G 35mm SLR Camera

1 Answer

My minolta sightseen camera wont take pictures?


The blinking zero would indicate that the film has not loaded but the cartridge is in place. The camera won't do anything when this occurs. Try opening the film door and load the roll again

Jan 14, 2008 | Photography

Not finding what you are looking for?
Photography Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Photography Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

168 Answers

Are you a Minolta Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...