Question about Kodak ESP 3 Multifunction Printer/ Copier/ Scanner

1 Answer

Cartridge is on side of printer and wont go into the middle for me to change the cartridge.what can I do

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 67 Answers

Turn off and unplug the printer. Let it sit for a LONG time--at least 20 min. Then, plug in and turn on to see if it resets itself. If not, make certain there are no obstructions in the path of the ink cradle, or in thr paper path. Finally, you may have a stuck microswitch that tells the printer the lid has been opened to change the cartridges. These switches are inside a rectangullar hole. Their actuators are often found on the edge of doors and covers. For actuators, just feel along the edges with your finger for fin-like protrusions. If there is a hole but the fin is broken off, the switch cannot activate.

Posted on Apr 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove old ink cartridge to replace it with new one?


What kind of printer do you have?
What exact problem are you having?
If it seems stuck behind something or wont lift out, some printers have you go into the settings or option window and choose change ink cartridge (or something close to that) then when you select it, the printer will send the cartridges to the middle for you to release.

Nov 25, 2015 | Office Equipment & Supplies

1 Answer

Konica monolta c650 wont fold


Saddel stich (Church program and staples in the middle)? or corner? Or booklet with two staple on the on left hand side? Saddel stick requires paper in landscape.. Check the staple cartridge. ensure both cartridge are securely installed.

Aug 29, 2014 | Konica Minolta bizhub Office Equipment &...

1 Answer

The ink cartridge wont come to center


Turn of printer. Turn it on, watch the carriage move, when it goes to the other side quickly unplug your printer, it should stop somewhere along the middle of the printer, now u can freely move it by hand to the position that you wanted, you can now remove the cartridge and replace it with a new one, after doing what you need to do just push the carriage towards the right side where it should be parked. Good luck!

Jan 14, 2010 | Dell Office Equipment & Supplies

1 Answer

How to change the ink cartridge?


lift the lid while the printer is on and the catridges should bring themselves to the middle so you can access them easily. If they dont, try pressing the button which indicates low ink (it may be flashing if they need changing) and this will bring them to the middle.

Once you have the cartridges in the middle they will either clip out by pressing down on the side nearest to you or there will be a catch keeping them in place which needs lifting and then unclip them. Just do the reverse to place the new ones in.

If you need any further help or I have missed anything then please let me know and I will do what I can :D

Nov 28, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Out of ink. Can't get cartridge to stop in middle to change


hi turn off the printer open lid move cartridge carrier to the middle, this should allow you to change the cartridge, then close the lid and turn on printer this should reset carrier to home position.

Jan 15, 2009 | HP DeskJet 810c InkJet Printer

1 Answer

Changing print cartridges


I had the same problem and just solved it.

I went to the menu and under the Maintenance Settings I selected "Head Refreshing" that did the trick.. now it works fine!

Jul 16, 2008 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

It just wont work


Move the ink cartridge carriage (the printhead) to the middle of the printer like you're going to change cartridges.  Take out all the ink cartridges.  There should be two black springs on either side of the printhead.  Remove these and the printhead should pop out.  Clean the nozzels (the little parts that squirt out ink) and reassemble.

If this doesn't work, then you'll have to replace the printhead.

Oct 28, 2007 | Brother MFC 3100C All-In-One InkJet...

Not finding what you are looking for?
Kodak ESP 3 Multifunction Printer/ Copier/ Scanner Logo

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5062 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...