Question about Linksys Wireless-G Broadband Router
I have the same router and the Cisco Systems is lit up with a white light behind it and it's working fine.
Posted on Apr 25, 2010
The cisco system light indicates the wireless security. If it is secured with the WPA security it will show you white light.
This light does not affect the wireless connection. If you have any problem with the wireless connection then you can check the wireless settings of the router.
Posted on Apr 27, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
on Jul 19, 2011 | Computers & Internet
on Jul 07, 2011 | Computers & Internet
Jan 11, 2015 | Cisco Computers & Internet
Sep 10, 2012 | Cisco Photosmart C4780 Wireless AllInOne...
on Jun 15, 2011 | Computers & Internet
SecureEasySetup (Orange/White) The Cisco logo is the Router's SecureEasySetup button. It
lights up and will stay orange when the Router is powered on. The color orange indicates that
the Router is not using the SecureEasySetup feature, while the color white indicates that the
Router is using the SecureEasySetup feature. When the Router enters SecureEasySetup
mode, the Cisco logo will turn white and start flashing. After the Router has generated
the SSID and WPA Personal key, the Cisco logo will stop flashing and stay white.
To clear the SSID and WPA Personal key, press and hold down the Cisco logo for five seconds.
The Cisco logo will flash slowly as the Router resets itself. The Cisco logo will turn orange to
indicate a successful reset.NOTE: SecureEasySetup is a feature that makes
it easy to set up your wireless network. If you have SecureEasySetup devices, run the Router's
Setup Wizard CD-ROM and follow the onscreen instructions to use SecureEasySetup.
Power (Green) The Power LED lights up and will stay on while the Router is powered
on. When the Router goes through its selfdiagnostic mode during every boot-up, this
LED will flash. When the diagnostic is complete, the LED will be solidly lit.
DMZ (Green) The DMZ LED indicates when the DMZ function is being used. This LED will
remain lit as long as DMZ is enabled. WLAN (Green) The WLAN LED lights up when
the wireless feature is enabled. If the LED is flashing, the Router is actively sending or
receiving data over the network. 1, 2, 3, 4 (Green) These numbered LEDs, corresponding with the numbered ports on the Router's back panel, serve two purposes. If the LED is continuously lit, the Router is successfully connected to a device through that port. A flashing LED indicates network activity over that port.
Internet (Green) The Internet LED lights up when there is a connection made through the
Internet port. A flashing LED indicates network activity over the Internet port.
Nov 26, 2010 | Computers & Internet
Jun 02, 2008 | Computers & Internet
Mar 11, 2008 | Cisco 1603-R Router
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: