Question about Samsung CLP-315W Laser Color Printer

1 Answer

Refilled black toner, but red light next to it is keep on blinking. Is there any problem? thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem. I think the system has been designed so you cannot or should not actually refill the toner - samsung have designed it so you have to buy a very expensive replacement and if you do a refill it stops the printing cycle working. The only solution is to reset the chip which requires a specialist tool and is not worth it. Put shortly samsung have designed a throw away product as the cost of a new set of toner cartridges exceeds the cost of a replacement identical printer from PC world. Think hard before you buy this one!!

Posted on Apr 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My sharp xerox machine AR-5516 is bleaking a man near toner signal point. why is this bleking? Kindly solve my problem.


The blinking man who we refer to as Mr Bill is a "time for maintenance light". Just ignore it, the machine will keep working.

Aug 21, 2011 | Sharp AR-5320 Black and White Copier

2 Answers

I am using samsung Ml 1640 Mono Laser Printer .After finishing Toner Ink I refilled it and set the toner into the printer . Then both of the lights Green & Red light is glowing but the Red light is...


Samsung uses a chip that senses when the cartridge has ended its service life, the chip is located in the cartridge itself, refilling toner won't help, replace the cartridge with a new one. hope this helps ;-)

Feb 03, 2011 | Samsung ML-1640 Monochrome Laser Printer

1 Answer

I have a samsung clx-3160fn printer I replacEd blk toner and it keeps sayn invalid toner .... I even refilled old toner and same error... Invalid toner


I have the same problem in a CLP-300. I have tested 3 diferent aftermarket chips from different manufacturers and always the same message: "invalid black toner" and the black toner light keeps red

Sep 21, 2010 | Samsung CLX 3160fn All-In-One Printer

3 Answers

ML-2510 Laser Printer : persistent blinking red light


Dear

This problem you will be noticed when toner is 90% empty.
Does the printer is functioning or No. If yes the problem is 90% toner is finished.[10% toner remaining alert]
If printer is not functioning Please change the toner from Genuine dealer. Else your printer fails due to non genuine and refilled toner.

Nov 11, 2009 | Office Equipment & Supplies

1 Answer

We re-filled the toner cartridge and re-installed it, but the red light indicating toner low keeps blinking, also the computor is telling us toner is low


Just refilling the cartridge may not resolve the low toner message. Many cartridges have a sensor chip that must be reset to clear the message. Due to this, many people opt to buy replacements or refurbished cartridges that have had the sensor chip reset.

Aug 15, 2008 | Computers & Internet

2 Answers

Flashing Lights


From the User Guide:

Black, Cyan, Magenta, and Yellow Supplies Status lights
These lights indicate when a print cartridge is low (the light is on), or empty or missing (the
light blinks). The lights also indicate when a non-HP print cartridge is installed (the light
blinks and the Attention light is on).

If you don't have a User Guide click on the link below and save it for future reference.


2550n User Guide

If this solution has been helpful, please rate it. Thanks!

Jul 16, 2008 | HP Color LaserJet 2550n printer + HP Color...

2 Answers

Light keeps flashing red,amber, green


If you turn off the printer and turn it back on, do you get any noises, ie motor noises, or does it instantly go to all lights flashing?
If you get no noises this usually indicates a board fault and you should look for a new printer.

Apr 07, 2008 | Brother HL 5140 Laser Printer

1 Answer

Toner light won't stop blinking


Try resetting it, open front cover hold down silver button, all lights should flash rotatingly, when stopped turn off and on and close door.

Oct 09, 2007 | Lexmark E330 Laser Printer

Not finding what you are looking for?
Samsung CLP-315W Laser Color Printer Logo

520 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...