Question about Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

6C10 - printer error? - Canon PIXMA MP210 Photo All-In-One Printer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 37 Answers

Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.

Posted on Aug 02, 2010

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: MP560 Canon Printer Error 6C10

The above suggestion worked short term, but in about a couple of hours, I'd get the same old error code again. Finally, I found a solution that worked for my MX860 on fixya.com written by "pineworks". The link is as follows: http://www.fixya.com/support/t4097826-aborber_full_error_message

Don't know if you've found an answer to this problem yet, but I had the same issue for about three months. Finally, I found a solution that worked for my MX860 on fixya.com written by "pineworks". The link is as follows: http://www.fixya.com/support/t4097826-aborber_full_error_message

For months, I've had to power off, disconnect from computer, and power on again to kick-start the printing. It was driving me crazy. So far, "pineworks" solution has been a permanent one. Been about a week and have had no problems yet.

Posted on Apr 14, 2010

  • 37 Answers

SOURCE: Canon PIXMA IP3600 Service error 6C10, and doesnn't print at all

Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.

Posted on Aug 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It wont print


Double check that the error isn't 6C10. I also thought I had an 8C10 error also and that's how I found your unanswered question! But I couldn't find any other internet reference to 8C10 but I did find a YouTube fix for a 6C10 error message. So I got my reading glasses and looked again. Sure enough it was a 6C10 error! I followed the instructions for the 6C10 error fix (resetting Ink Absorber Reset) and my printer is now functioning. Bonus note: My printer is a MP620 and the reset was for a MP550. Same error number though! and also same solution. By now your printer has probably crossed that printer rainbow bridge... but hopefully someone else will need your help? With my reset, I am going to run my $$$ ink cartridges out instead of maintenancing the absorber and then toss mine as well!

Dec 17, 2012 | Canon Pixma MP620 All-in-One InkJet...

1 Answer

Canon MP-5200 printer will not turn on display


6C10 means you need to replace the ink absorber. After this it require to reset the error. Reset 6C10

Oct 15, 2012 | Canon PIXMA iP4600 Color InkJet Photo...

2 Answers

Absober full canon ip4840


My printer IP4840 have an error 6C10 how do l solve this

May 22, 2011 | Computers & Internet

1 Answer

Get service error 6C10 Troubleshooter says turn printer off then on - nothing


Check the service notes for error 6C10 at
http://insigniaproducts.com/products/computers/D300a.html
Hopefully one of the explanations apply to your problem.
Let me know if this helps. Thanks.

Dec 11, 2010 | Canon PIXMA iP4600 Color InkJet Photo...

1 Answer

My Canon MP630 has a 6C10 error


You have a "Valve Cam sensor error". Usually caused by paper debris inside the printer, probably near the purge unit.

Have a ggod look inside and see if you can see any bits of paper.

Jan 08, 2010 | Canon Office Equipment & Supplies

Not finding what you are looking for?
Canon PIXMA MP210 Photo All-In-One Printer Logo

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1975 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...