Question about Televison & Video

2 Answers

Got a marquant tv/dvd and no brand code to fix up the new tvrcsat. any advice on where to find this brand code ?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need a CODE to unlock my marquant tv 14inches

Posted on Jan 07, 2012

  • henryorishet Jan 14, 2012

    What code will i use 2 unlock my 14inches marquant tv

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 52 Answers

Hi there,

On the back of your tv should be either a silver or a white sticker, these vary in size but around 6cm x 8cm, the sticker has on it various pieces of information from the power consumption of the tv, how loud the speakers go etc. Usually at the top though will be the manufacturer's name and underneath that will be a code normally a combination of numbers and letters, sometimes preceeding it there will be P/N (part number) this code nine times out of ten will be the model number but if not it will be on this sticker.

Hope this helps,

James

Posted on Apr 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a remote control for my Disney princess TV. I have tried a universal remote but the input would not work. How can I buy a new remote?


you have the hardest to find code for any tv my company has seen in 27 years the manufacture of these tvs have never released the code as have all other master tv companys my best advice is to purchase a really good brand programable remote as with a unit we recommend to our clients has 8000 codes and has never failed to detect a device. as with the cheaper remotes they have around 200 codes if your paying around $ 50 for it then it should have the backing code that will insept the correct inputs


best of luck

Nov 30, 2010 | Disney Princess TV/DVD Combo

1 Answer

Cannot program dvd player. unit does not fully answer commands from remote.


Hi,

To program the DVD player's remote control to operate your TV, follow these steps:
  1. Turn on the TV, and then aim the DVD player’s remote control at the TV.
  2. Press and hold the [TV Power] button on the DVD player's remote control.
  3. While holding the [TV Power] button, use the number buttons on the remote to enter the two digit code assigned to your brand of TV.
Note 1: If your DVD player's remote control can be programmed to operate a TV, the TV brand codes will be listed in your owner's manual. If you don't have your owner's manual available, click here to go to the download center and download a copy.
Note 2: Many TV brands have more than one code. If the first code does not work, try the next available code.
  1. If the TV turns off, the code worked correctly and your remote control is now programmed. If the TV stays on, repeat steps 1 through 3 with a different code listed for your brand of TV.
Note: If none of the codes listed allows your DVD player's remote to control your TV, then the remote is not compatible with your specific model.

Let us know if you want something more else please accept the suggestion.


Thank You for contacting Fixya.com

Jun 11, 2010 | Audio Players & Recorders

2 Answers

I need code for my nse urc22b-10 universal remote control


i have a panasonic tv i want code for urc-22b-10 remote controler

Oct 07, 2009 | Teac RC-L2 LCD Touchscreen Remote Control

2 Answers

Duraband tv code needed for a tvrcsat -rs remote


need code for swisstec flat screen 15 inch

Mar 26, 2009 | Televison & Video

3 Answers

SV2000 tv/dvd code


the code for the SV2000 using a oneforall remote is 0456

Jul 08, 2008 | One For All URC-4021 Remote Control

1 Answer

Cant get jumbo remote to work for my tv


If it's an Innovage brand jumbo remote, try this...
There are 2 different versions of the Innovage Jumbo remote, an old and a new.
For the old version:
1. You have to have the TV or DVD turned OFF.
2. Then, you have to push CODE SEARCH button once for 3 seconds till it lights solid
3. Then press TV (or DVD) button once till it lights once and turns solid and press the ON/OFF button very slowly and repeatedly as many as 300+ times to wait for the TV (or DVD) to go on.
4. Once it goes on...STOP and IMMEDIATELY press ENTER before you pass up the code or you'll have to start over!

This is very frustrating but my advice is to take it slow and methodical. Think the tortoise and the hare...if you go too fast, you'll redo it several times because you'll keep passing it up and accidentally turn the TV on and off suddenly and miss the code.
--------------------------------------------
For the newer version:
1. Turn the TV (or DVD) ON.
2. Press CODE SEARCH once and it blinks.
3. Press TV (or DVD) once and it blinks.
4. Press ON/OFF button only ONCE.
5. Wait as it automatically searches for the code by itself. It will have a slow long blink between each code it searches.
6. Stay alert because when the TV (or DVD) goes off, you IMMEDIATELY have to push ENTER to lock in that code before it goes onto the next one. (which it will even if the TV is off)

Apr 25, 2008 | Big Button TV Universal Remote

1 Answer

Codes for Big Button Remote


If it's an Innovage brand Jumbo remote, try this...
There are 2 different versions of the Innovage Jumbo remote, an old and a new.
For the old version:
1. You have to have the TV or DVD turned OFF.
2. Then, you have to push CODE SEARCH button once for 3 seconds till it lights solid
3. Then press TV (or DVD) button once till it lights once and turns solid and press the ON/OFF button very slowly and repeatedly as many as 300+ times to wait for the TV (or DVD) to go on.
4. Once it goes on...STOP and IMMEDIATELY press ENTER before you pass up the code or you'll have to start over!

This is very frustrating but my advice is to take it slow and methodical. Think the tortoise and the hare...if you go too fast, you'll redo it several times because you'll keep passing it up and accidentally turn the TV on and off suddenly and miss the code.
--------------------------------------------
For the newer version:
1. Turn the TV (or DVD) ON.
2. Press CODE SEARCH once and it blinks.
3. Press TV (or DVD) once and it blinks.
4. Press ON/OFF button only ONCE.
5. Wait as it automatically searches for the code by itself. It will have a slow long blink between each code it searches.
6. Stay alert because when the TV (or DVD) goes off, you IMMEDIATELY have to push ENTER to lock in that code before it goes onto the next one. (which it will even if the TV is off)

Apr 16, 2008 | Big Button TV Universal Remote

2 Answers

Innovage Jumbo Universal Remote


If it's an Innovage brand Jumbo remote, try this...
There are 2 different versions of the Innovage Jumbo remote, an old and a new.
For the old version:
1. You have to have the TV or DVD turned OFF.
2. Then, you have to push CODE SEARCH button once for 3 seconds till it lights solid
3. Then press TV (or DVD) button once till it lights once and turns solid and press the ON/OFF button very slowly and repeatedly as many as 300+ times to wait for the TV (or DVD) to go on.
4. Once it goes on...STOP and IMMEDIATELY press ENTER before you pass up the code or you'll have to start over!

This is very frustrating but my advice is to take it slow and methodical. Think the tortoise and the hare...if you go too fast, you'll redo it several times because you'll keep passing it up and accidentally turn the TV on and off suddenly and miss the code.
--------------------------------------------
For the newer version:
1. Turn the TV (or DVD) ON.
2. Press CODE SEARCH once and it blinks.
3. Press TV (or DVD) once and it blinks.
4. Press ON/OFF button only ONCE.
5. Wait as it automatically searches for the code by itself. It will have a slow long blink between each code it searches.
6. Stay alert because when the TV (or DVD) goes off, you IMMEDIATELY have to push ENTER to lock in that code before it goes onto the next one. (which it will even if the TV is off)

Dec 30, 2007 | Televison & Video

1 Answer

32inch Akai tv


contact your friend and ask for the code! if not, look in the manual and try to fix it. =]

Nov 15, 2007 | Akai CFTD2083 20 in. TV/VCR/DVD Combo

1 Answer

DVD S1000 video player


A new Laser pick up will fix your problem expencsive repair

Dec 12, 2006 | Fisher DVDS1100

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74245 Answers

Cindy Wells

Level 3 Expert

5127 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...