Question about Electrolux Washing Machines

2 Answers

My Electrolux ewf1090 front loader door wont open

I have an electrolux ewf1090 front loader washing machine. When the machine finished its wash cycle the light on the door went off indicating it was finished. When i went to open the door it started to release then it clicked passed the release point and the door wouldn't open. When i try to open the door now there is no pressure behind the handle to release the door and so it remains shut full of clean wet washing. I put it through another wash to try and re-engage the doors release but no success. How do i manually get the door open?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the ewf1090 washing maching now door locked just can not open the cycle is show end and the door lock have twice sound but still can not open how do I can open it

Posted on Mar 07, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 6 Answers

Turn the power off and leave for 5-10 minutes then turn on. This should release the door lock the problem could be the pump drain filter is blocked clean this and it should resolve future problems.

Posted on Dec 05, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: electrolux ewf 1090, have an electrolux ewf1090

ewf1090 washing machine not working?
error E50 is displayed?
but no reference in manual that helps.

Posted on Jan 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washing machine stops on rince cycle


when the unit sense a strong vibration it automatically stop the unit. unplug the unit and wait for thirty seconds then open the lid and redistribute the cloths inside to balance the load then close lid then plug unit then push power and program your washing again

Feb 24, 2016 | Electrolux Ewf1090 Front Loader Belt Part...

1 Answer

Error code E40 on a Electrolux Front Loader Washing Machine EWF1090 What does it mean and how can I fix it?


Family error code E40 is visible to customers and (could be E41,E42,E43,E44 and E45 only visible in service mode) means problem with open door or door interlock.
I suggest rapid reading alarm code when appliance is in normal operating mode (e.g. during the execution of the washing
programme):
Press and hold down START/PAUSE and any of the option buttons for at least two seconds: the LEDs initially switch off, and then display the flashing sequence corresponding to the alarm.
The alarm sequence continues as long as the two buttons are held down.
E41 - Door open
E42 - Problems of door closure
E43 - Interlock power supply triac faulty
E44 - Door interlock sensor faulty
E45 - Door interlock sensing circuit triac faulty

Possible causes:
Door interlock faulty, wiring faulty or PCB faulty.

Dado

Feb 24, 2015 | Electrolux Washing Machines

2 Answers

My electrolux ewf 1087 front loader door wont open


You will need to remove the drum and reset the alignment.
The cloth is struck and has jammed on the drum movement.
click this link: drum removal

Jan 21, 2013 | Electrolux Washing Machines

1 Answer

E42 error code electrolux washing machine


Just followed the advice above by removing the 2 screws holding the top on and manually released the front load door. Now to figure out what part I need to replace the door lock mechanism and figure out how to do that.

Thanks!

Dec 20, 2012 | Electrolux EIFLW55HIW Front Load Washer...

1 Answer

My 7.5kg Electrolux Washing Machine whent bang and


your door lock has blown/short circuit turn power of disconnect plug take top of machine look down inside machine toward door lock and you shoud see the catch push hard with your finger and door will open be careful as there are some sharp edges in there.

May 31, 2010 | Electrolux Washing Machines

1 Answer

ELectrolux frontloader EWF1090 door wont open


Make sure you drain the machine first by setting a spin cycle manually and see if it releases the door after a few minutes. If that fails then switch off the machine and leave for 5 mins, door should release but you could end up with water on the floor. After this clean your filter and check you water pump, then try a short cycle without clothes.

Apr 11, 2009 | Electrolux Washing Machines

1 Answer

Door jam!


Probably you need a new doorlock. I really dont have a good answer how to open the door with this problem.

Jan 24, 2008 | Electrolux EW1000i Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,778 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Washing Machines Experts

Tim Whalen

Level 3 Expert

3072 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you an Electrolux Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...