Question about One For All URC-6131 Remote Control
The codes are,0503,0695,1045,...turn the DVD on,on the remote, press and hold the set button until the light blinks twice,then release set button,then enter one of the four digit codes, the light will blink twice,if not try another code,then press power button, it should turn off......hope this was helpful....
Posted on Apr 25, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 18, 2016 | Astar DVD-3100 DVD Player
Aug 06, 2014 | Philips Phillips BDP5010/F7B Blu-ray...
Aug 18, 2012 | Sony DVP-FX750 Portable DVD Player
 Turn on a desired device (e.g.,VCR or
DVD player) and, if applicable, insert
media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely
before proceeding.Highlight or write down the
codes and device you wish to program before
starting step 2.
 On the remote control,press a device key
once (i.e., TV,PVR,DVD, CBL/SAT,AUD,or VCR).
NOTE: To program control of a cable box or
satellite receiver, press CBL/SAT once.
NOTE: To program control of a CD player or
audio receiver, press AUD once.
NOTE: To program control of a TV/VCR Combo,
press VCR once.After programming, you will be
able to control channel selection, volume, and
NOTE: To program control of a TV/DVD Player
Combo, press DVD once.After programming,
you will be able to control channel selection,
volume, and DVD functions.
 Press and hold SET until the LED (red light)
blinks twice, then release SET.
 Use the Manufacturer's Codes to locate the type of device and
brand name and then enter the first fourdigit
code for your device. If performed
correctly, the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps
2 through 4 and enter the same code again.
 Aim the remote control at the device and
press POWER once.The device should turn
off. If it does not, repeat steps 2 through 5,
trying each code for your brand until you
find one that works.
NOTE: If the device does not have a POWER
key, press the (Play) key.
 Repeat steps 1 through 5 for each device you want to control.
Jul 03, 2011 | Televison & Video
Apr 30, 2011 | Myron & Davis AD212
Jan 30, 2009 | RCA RCU600M Remote Control
Jan 28, 2009 | Emerson EWF2004 20" TV
Oct 22, 2008 | Televison & Video
Apr 03, 2007 | Cyberhome CH-DVD 300 DVD Player
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: