Question about Panasonic DMP-BD10 Blu-Ray Disc Player

1 Answer

What does it mean entering the encription key of the access point being connected?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

If your player is connected to the internet then you need to check your wireless router. You could first try power cycling the router by unplugging the power cord from the back of your wireless router for 15-30sec or get a paper clip and hit the small reset pin hole on the back of the router. If your still getting this message then you need to find out what wifi security phrase or code is on your wifi router either you have WEP or WPA-PSK security code for your home network. The access point is your wireless router or Modem. If you do not remember or have the passkey then you need to contact your internet router/modem manufacture.

Posted on Apr 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you get the dsixL to conect to internet.


Hi. Welcome to fixya!
Follow the steps below to connect your device to the internet.
1. Turn on your Nintendo DsixL and click on the wrench icon to access the system settings. 2. Scroll to the third page and select INTERNET. 3. Then choose Connection settings. 4. Click "None" for Connection 1 5. Click "Search for an access point" 6. It will now search for any access points within range. Once it's done with the search it will display the wireless networks it finds. 7. Look for your wireless network. 8. If you see an image like this cattyrific_3.jpg tap on your network name and save your settings and begin a connection test. An image prompt of Connection successful would mean that you are now connected to the internet.
9. If you see an image like this cattyrific_4.jpg means your connection is locked with a security code. You need to enter your WEP key in order to connect to the internet. Your WEP key is the one saved in the settings of your router. Just type it in to begin the connection. When connection is successful you are now connected to the internet.
10. If you see an image like this cattyrific_5.jpg means your connection is secured with a WPA and requires a security key. You need to type in the WPA key to begin connection. Just enter the one saved in your router settings. When done it will connect you successfully and your now connected to the internet.

Jul 24, 2011 | Nintendo Video Game Consoles & Games

Tip

How to connect your Nintendo DSi to the internet


In this guide I will go over the steps you will need to take in order to connect your DSi to the internet. You must first be in range of a wireless access point in order to use it. If you do not have wireless internet at home, you can use local hot spots that do such as coffee shops and school libraries. <br /><br />-Turn on your DSi and click on the wrench icon which will take you to System Settings. <br />-Go to page 3 and select "Internet", and click on "Connection Settings"<br />-Click "None" to the right of "Connection 1"<br />-Click "Search for an Access Point"<br /><br />This will bring up any wireless access points within range of your DSi. Any access points that have a gold lock that is unlocked means this access point does not require a security key. If you are going to use a access point that requires a security key, you will need to enter this key in. <br /><br />-Go back to the "Connection Settings" page and select "Advanced Setup". You will then be prompted for your wireless access point security information. Enter it in here.<br /><br />Okay. You should be connected and ready to enjoy your DSi. Good luck! <br /><br />G33k

on May 11, 2011 | Nintendo DSi Black Console

1 Answer

My laptop is asking for a network key or a WEP key or a WPA key and I have not idea what this means or what I'm supposed to do get my laptop to connect to the internet.


this about security on your Access Point Connections meanly anyone want to connect with that access point you must fill valid key access on that connections.

Apr 19, 2011 | D-Link DIR-615 Wireless Router

3 Answers

Nintendo ds screen says unable to connect to a access point. error code: 051310-1


How to fix: Make sure the security key and security type are entered into the Nintendo DS exactly as they appear in your router's settings.

Feb 28, 2011 | Nintendo DS Console

1 Answer

Access point button on dell router


Like traditional wired solutions, access point give the means of connectivity on a different technology, with the same goal, connection. This way you can freely move the laptop across the house without the need of physical cables maintaining access to internet. But, because the connection is made by radio frequency there a security risk. When you buy a access point you have to enable security to assign a key that you have to enter on the computer trying to connect. If you cannot enable security, anyone who see the signal can enter and use your internet.

Jul 04, 2009 | 2wire Computers & Internet

1 Answer

Access point did not accept new connections - what could be the possible reasons for that?


it may have a Mac address filter or some sort of encription either a WPA or WEP.

Jun 24, 2009 | Computers & Internet

1 Answer

Foregot my network key password


you set it connecting as admin to your router.
set xeme encription as your PC and of course same key

Apr 25, 2009 | Computers & Internet

1 Answer

Psp


The following items are generally required to set up to connect to a network.
  • A WLAN access point or a wireless broadband router
  • Settings for the access point (SSID, WEP key, WPA key, etc. as specified when the access point was configured)
  • A network device, such as an ADSL/DSL modem or a cable modem.
  • An account with an Internet service provider
Hints
  • An access point is a device used to connect wirelessly to a network.
  • A router is necessary if a PC and the PSP™ system will be connected to the Internet at the same time. A router is a device that enables multiple devices to be connected to one Internet line.
  • SSID, WEP and WPA keys are types of wireless network information. This information may be required when connecting to an access point or a router.
  • User is responsible for Internet service fees.
Example of a network configuration Network equipment connection and setup methods vary depending on the equipment used.

require001.gif Common settings hr1.gif You can create network settings for use in connecting to the Internet through an access point and save them on the PSP™ system. You can save up to 10 connections.
Setting methods may vary depending on usage conditions. The following is an example of commonly used settings.
1.
Check that the settings for the access point have been completed.
Check that there is an access point connected to a network with Internet service near the PSP™ system. Settings for the access point are typically set using a PC. For details, contact the person who set up or maintains the access point.
2.
Select in_networkset.gif (Network Settings) under in_setting.gif (Settings).
3.
Select [Infrastructure Mode].
4.
Select [New Connection].
5.
Select [Scan].
The system searches for nearby access points.
Depending on the model of PSP™ system in use, you may have the option [Automatic]. Select [Automatic] when using an access point that supports automatic setup. If you follow the on-screen instructions, the necessary settings will be completed automatically. For information on access points that support automatic setup, contact your local retailer.
standard001.jpg 6.
Select the access point that you want to use.
SSID is an identifier assigned to an access point. If you do not know the SSID or the SSID is not displayed, contact the person who set up or maintains the access point.
standard002.jpg 7.
Select the type of security that you will use.
The type of security settings required vary depending on the access point. For details on what type to use, contact the person who set up or maintains the access point.
standard003.jpg 8.
Enter the encryption key for the security settings.
The encryption key field displays eight asterisks no matter how many characters you enter as the key. For information on the encryption key, contact the person who set up or maintains the access point.
standard004.jpg 9.
Select [Easy].
Basic settings are set automatically.
standard005.jpg 10.
Enter a name for the connection.
You can choose any name for the connection.
11.
Check the list of settings.
standard006.jpg 12.
Save the settings.
13.
Test the connection.
If you select [Test Connection], the system will connect to the selected access point.
14.
Confirm the connection test results.
If the connection is successful, information about the network connection is displayed.
Hints
  • If the connection test fails, follow the on-screen instructions to check the settings. Network settings for the connection can be changed from the options menu. For additional information, refer to the instructions supplied with the network device and by your Internet service provider.
  • Depending on the access point settings, you may need to enter the system's MAC address to connect to the network. The system's MAC address can be checked under in_setting.gif (Settings) > in_pspset.gif (System Settings) > [System Information].

Jul 12, 2008 | Sony PlayStation Portable (PSP) Console

2 Answers

WIRELESS CONNECTION FINDS NO ACCESS POINT.HAVE LINKS NOTEBOOK ADAPTER WORELESS 3. CONNECTIVITY IS NOT CONSISTENT.


If you mean the encription key, which technically is not a password, you may get it acessing to the router page with Internet Explorer. You will need your router's IP and a wired connection.

hope it helps

cheers

Feb 13, 2008 | 2wire (1000-400108-001) Router

1 Answer

128 bit encription for WEP


Should just be: turn WiFi on, WiFi Manager -- tap Configure -- tap on name of your network, then on Authentication (or Authentication Key). Then set Shared/WEP, uncheck the box "Key is provided automatically", and enter your key. Remember, the iPaq wants the actual key in hexadecimal, not the passphrase. And you'll need to know which of the 4 standard WEP keys the one you're entering is. Good luck.

Sep 08, 2005 | HP iPAQ HX4700 Pocket PC

Not finding what you are looking for?
Panasonic DMP-BD10 Blu-Ray Disc Player Logo

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

The Knight
The Knight

Level 3 Expert

74468 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...