- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are two way to do this. 1. Connect all your devices individually to the Pioneer receiver. Doing this allows you so have different sound settings for each input. A reason you might want this is that your DVD will need a DTS or Dolby sound setting so that you get the best audio from your DVD, whereas your TV may only be outputting stereo audio. In this case you would set your Pioneer to a stereo setting. 2. Connect your devices to the Sharp display, then connect the audio output of the Sharp to a free audio input on the Pioneer. Your Sharp LED TV has two ways to do this:a. If you have a digital capable Pioneer sound system, connect using the "Digital Audio Output". You will need a Toslink (Optical) cable for this connection.b. If you only have analog capabilities in your Pioneer sound system, you must use the 3.5mm (1/8 Inch) analog audio output from the Sharp TV to stereo RCA (red and white plugs that are most commonly supplied with home theatre product).
im only spreading the word due it i had my decks fixed their and i am so
pleased im telling everyone so they can get the same service i did,
rather than paying over the odds at some **** toster repair shop.
start with the tuner, hook up the equalizer to the tuner, then on the rear of the equilizer hook up all the peripherals except the amps which will go to the tuner outputs and all will feed thru the tuner to the amps and out to the speakers
There shouldn't be any compatibility problems, especially since you can transfer files one way already. You might want to make sure any wav files you are trying to import to tracks on the 2488 are saved as 'mono' waves rather than 'stereo'. The 2488 won't import a stereo wav file.
Another problem sould be naming. Try to stick to the old dos 8.3 naming standard (xxxxxxxx.xxx) for any files which you wish to import.