Question about Washing Machines

1 Answer

Kenmore He2 Plus front load washer quit working with 3 minutes on timer on spin cycle. Door is locked and wont open. Itried 2 suggestions in owners manual to run the rinse and spin cycle (won't run any cycle) and to push Stop but door stays locked with Add Garment light on. When I puch Start there is a quiet buzz noise instead of the loud click sound.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

Unplurg your washer an wait 5minute an the door will open

Posted on Apr 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore HE 2plus front load washer and during any wash cycle the drum won't spin and at end of cycle displays F01


Front-loading washer Kenmore HE2 plus - spinning not ...

www.shopyourway.com > Manage My Life > Questions
My Kenmore HE2 plus washer has problems with spin funciton. almost all of the ... or twins size blanket, it just won't spin, even with extra spin cycle only. ... Check to see if the washer will spin without any clothes at all in the basket. ... My HE2 will wash a very small load. ... Any bigger loads The drum will try and turn but wont.

Front Load Washer Won't Drain or Spin Video: Washing ...

? 1:54
https://www.youtube.com/watch?v=wlMoT9rgvAg
Jun 1, 2012 - Uploaded by searspartsdirect
... won't drain or spin. For more front load washing machineinformation and repai. ... If the cycle has completed and water is still left in the machine select "Drain and Spin" to remove anywater remaining in the washer. This can be caused .... I have aKenmore HE2 plus front load washer. I can't seem to get it ...

Kenmore HE2 Plus 3.6 cu. ft. Front-Load Super Capacity ...

www.kenmore.com > Laundry > Washers > Front-load Washers

KenmoreFront-Load Super Capacity Washing Machine (4753) .... super wet, and to spin the empty drum after each load to hear if anything was caught in that gap. .... 1st of all: You cannot use any other detergent than HE rated detergent - PERIOD. ... will create too many suds and clog up the machine, and the clothes won't be clean.

Jan 15, 2016 | Kenmore Washing Machines

1 Answer

Lights keep flashing and door locks without finishing cycle


Kenmore HE2 Plus Front Load Washer Keeps unlocking ...

www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
flashing prewash and add garment lights My HE2 Plus will fill with water, but when ...Kenmore HE3 2plus wont finish cycle Washer wont finish the last1 minute of cycle. ...We ran a load twice and it still did not unlock. du is the code for cannot ... Why does the door keep unlocking and locking in between the drum rotating?

Admiral, Whirlpool, Maytag - Washer Repair - Not ... - YouTube

? 5:51
https://www.youtube.com/watch?v=oBihToN6dxs
Sep 6, 2013 - Uploaded by ApplianceVideo.com
Troubleshoot your Admiral Top Load Washer that has these following symptoms: Not Completing all Cycles ...

Washing machines - Ariston



Jan 05, 2016 | Washing Machines

1 Answer

Open locked door


To open the door when locked. Start new wash cycle and the door will lock - unlock then lock again. when it unlocks open the door quick.

Feb 15, 2015 | Kenmore HE2 Plus Front Load Washer

1 Answer

I have the Kenmore front load washer HE2. How do I use the clean washer cycle.


Hello, welcome to FixYa.

In order to perform a "clean" on the HE2 is as follows...Read these instructions completely before beginning the cleaning process.
**If necessary, the cleaning cycle may be interrupted by pressing STOP. This will stop the cycle. A RINSE/SPIN cycle must then be run to thoroughly rinse the remaining bleach from the unit. Failure to do so will cause damage to the unit and clothing added to the next cycle.**

Begin procedure

1) Open the washer door and remove any clothing or items from the washer.

2) Be sure the door is closed.

3) Open the dispenser drawer and immediately add 2/3 cup (160 mL) of liquid chlorine bleach to the bleach compartment.


NOTE: Do not add any detergent to this cycle. Use of more than 2/3 cup (160 mL) of bleach will cause product damage over time.


4) Be sure dispenser drawer is closed.


5) Select the CLEAN WASHER cycle.

6) Press START.

NOTE: The basket will rotate, then the door will unlock, lock again, and then the cycle will continue. The machine will not fill, but the basket will rotate while the washer runs a short sensing cycle. This will take approximately 3 minutes.


7) The cycle will determine if clothing or other items are in the washer. a) If no items are detected in the washer, it will proceed to step 8. b) If any items are detected in the washer, all cycle lights will flash and "rL" or "F/34" will be displayed. Associated LED status lights will remain lit. The door will then unlock. Press STOP to cancel the failure code. Then repeat steps 1, 2 and 6 to start the cycle again.


8) Once the cycle has begun, allow the cycle to be completed.


9) After the cycle is complete, leave the door open, slightly, to allow for better ventilation and drying of washer interior.

Good Luck and thank you for choosing FixYa. Please take a moment to rate the info I provided and a short testimony is appreciated.

Regards,

Macmarkus :)

Aug 14, 2011 | Kenmore HE2 Plus Front Load Washer

1 Answer

During spin cycle, load was out of balance, now cant get the door to close. Lock mechanism is closed. How do I get the lock mechanism to open and allow the door to shut?


You can attempt to reset the operating system of your washing machine by unplugging it from the outlet and leaving it for a few minutes and then replugging it.

Dec 28, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

I have a Kenmore washer HE2 plus and F26 is flashing


DOOR SWITCH ERROR

If the door has not been opened for 3 consecutive cycles or the door switch is open while the door is locked for more than 5 seconds.

Possible Causes/Procedure

-Door not opened during 3 consecutive cycles.

1. Open and close the door.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

-Door switch open while door is locked.

1. Push the door and check if it is completely closed.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.%%%%

May 14, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

What does error code F26 mean? The washer will fill with water, work for about 5 minutes and then post error F26 and stop working. Where do I find the error codes?


DOOR SWITCH ERROR

If the door has not been opened for 3 consecutive cycles or the door switch is open while the door is locked for more than 5 seconds.

Possible Causes/Procedure

-Door not opened during 3 consecutive cycles.

1. Open and close the door.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

-Door switch open while door is locked.

1. Push the door and check if it is completely closed.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.$$$$

May 05, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

Kenmore HE2 won't finish spin cycle


you have blockage in you drain plug. to solve this problem you'll have to remove the lower front panel of your machine by removing the 3 (1/4") screws on the vary bottom of the machine. once the panel is removed you'll see a 1 1/2" white PVC drainage plug. turn the inner plug to the left in till open. (WARNING ALL THE WATER IN THE DRUM WILL DRAIN THOUGH THIS PLUG) remove debris likes socks or everything that's there replace the panel and your all set.

May 28, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

Kenmore model 44142400 door lock


Try unplugging for 2 minutes and if display looks the same, then theres and elec. issue.

Mar 08, 2009 | Kenmore HE2 Plus Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

492 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...