Question about Maytag M7DH65B2A Dehumidifier

2 Answers

The "full light" will not quit blinking.

I haven't used it since last year; not sure how old it is and I do not have the manual for it. Today I plugged it in and it keeps saying my tank is full. Also my screen is dirty. Is there any special way I should clean it.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Duh!

Posted on May 21, 2013

  • Sandra May 21, 2013

    does anyone actually know how to fix this problem?

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You take out the filter screen and vacumn it or run it under warm water. As far as the full light is concerned it probably means the last time you emptied it you didn't seat it back into the unit properly. If you take the tank out and reinstall it the light will probably go off. Sometimes I have to do it a couple of times before it seats properly.

Posted on Apr 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The "full bucket" light is blinking- and the


When the Bucket Full Light is on, none of the controls (other than the On/Off) will work. If you haven't
emptied the bucket, do so. Then make sure the bucket is reinstalled properly into the holder. Failure to do this will cause the Bucket Full Light to stay ON. While you have the bucket out, check the inside of it for a float valve. It may be stick in the UP position. If so, jiggle the handle to make it return to the DOWN position.

I hope this helped you and thanks for Choosing FixYa.

Aug 12, 2011 | Kenmore 54501 Dehumidifier

1 Answer

When I plug my LG dehumidfiyer Model LHD659EBL I hear a small beep and nothing happens. I can not turn it on or get a light on the panel to even light. This unit is only a few years old and it worked fine...


Remove the water collection bucket and reinstall it. Make sure the bucket fits "squarely" in the holder from top to bottom. The bottom should not tilt down at the bottom, when it's properly installed.
While you have the bucket out, look in the top of the bucket for a float valve. If it has one, it may be stuck in the UP position. Juggle the float arm to get it to return to the DOWN Position and reinstall the bucket as described above.

Either of the tings mentioned above, will cause the unit to not turn ON.

Hope this helped you and thanks for choosing FixYa.

Jul 26, 2011 | Dehumidifiers

1 Answer

My dehumidifier is only about a year old and the bucket full light keeps blinking. i turn it on, it sounds like its going to kick on but shuts off a second later.


It sounds like the switch under the bucket is stuck. Remove the bucket and there should be some kind of switch where the bucket rests against. Make sure the switch works freely if not spray a little contack cleaner on it and work the switch by hand until it frees up.

Mar 11, 2011 | Goldstar DH504EL Dehumidifier

1 Answer

Kenmore Dehumidifier 129-25803, Pump System malfunction


I also have a Kenmore pump system 129-25803 but I do not have the manual. I have tried to find one online but to no luck. I also called the Sears Parts & Service and they do not have a listing for this type of dehumidifier. Just wondering if you have a manual you could share? Please email me at taylor005@eastlink.ca

Jul 26, 2010 | Kenmore Dehumidifiers

2 Answers

Unit will not run.


Error code 01 - unit has a sealed system leak; most warranties are 5 years.

Dec 30, 2009 | Kenmore 54701 Dehumidifier

1 Answer

LHD45EL Dehumidifier won't run


This will need to be serviced. LG has a 5 year warranty on these models. They usually will tell you of a service center nearby which will service it free of charge since it is under warranty. If you do not live near a service center they may ship you a replacement and you send your old dehumidifier back to them. Make sure you have your reciept when you contact them so they can verify it is 1 year old.

Jul 20, 2008 | LG LD65EL Dehumidifier

1 Answer

Dehumidifier won't turn on


Make sure the buicket is seated all the way. Sometimes it doesnt fully engage on the left side. If it is then it may need to be serviced. LG has a 5 year warranty on these models. They usually will tell you of a service center nearby which will service it free of charge since it is under warranty. If you do not live near a service center they may ship you a replacement and you send your old dehumidifier back to them. Make sure you have your reciept when you contact them so they can verify it is under 5 years old.

Nov 08, 2006 | LG Goldstar LD65EL Dehumidifier

Not finding what you are looking for?
Maytag M7DH65B2A Dehumidifier Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dehumidifiers Experts

Michael Van Der...
Michael Van Der...

Level 2 Expert

66 Answers

Bill Long

Level 3 Expert

587 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Maytag Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...