Question about Sega Video Game Consoles & Games

1 Answer

I need to know if I can get my sega scope 3d glasses fixed. The arms snapped off.

Posted by on

  • jaypaulson Apr 24, 2010

    I was hoping you were going to connect me with repair assistance from the manufacturer. I can figure out a simple glue predicament. The arms on the glasses are hinged in wholes, so If I glue them they will be stationary. I would like to know specifically, can the be repaired from sega and where?

  • jaypaulson Apr 24, 2010

    I don't feel this was worth 12.99. I could get this info off the box.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Sega Master
  • 13,433 Answers


could you be a bit more spesific? the arms on the sides snapped off? if they are only plastic, you can use somekind of a glue to put it back together.

if there are wires going in the arms, it may be a bit more difficult to get working again.

Posted on Apr 24, 2010

  • Ekse Apr 24, 2010

    so its been 22 years since these came out, you will have very difficult time trying to find a official repairer. Give Sega a call, its unlikely that they would repair them.

  • Ekse Apr 24, 2010

    well the answer to your question, can you get your sega scope 3d glasses fixed, yes you can come up with something yourself, but most likely as these are quite old, no one no longer does repairs, these are no longer being made, hardly no one has these, most likely no one but a few collectors still have one or two around.

    I see a new pair is going for 188 on ebay just 2 available.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

4 Answers

SONY BRAVIA 3D ANDROID TV MODEL-43W800C 3d active or passive in bangladesh? Which 3d glass required?

A 3-D glass won't be effective; especially in Bangladesh. A 3-D mirror; which look like a (kaleidoscope) is needed to see images in 3-D; in your country. Look for that.

Jul 04, 2016 | Sony Televison & Video

1 Answer

Which brand 3D glasses do you like to use?

You need to know what brand is compatible with your TV.

Apr 13, 2016 | Samsung 3D GLASSES ADULT BATTERY TYPE...

1 Answer

How do I change the glass in the outside mirror on a 2003 Lincoln towncare

behind the piece of glass there is a black plastic that the glass sticks to if you push it to one side stick your fingers behind it and pull you will disconnect the glass retainer from the mirror motors bracket do this on both sides of the mirror and make sure you don't lose the little barrel shaped arms that snap the glass retainer into the window motor housing where glove for broken glass splinters sometimes it's best to put those barrel arms in then press the glass in but I would say it's better to try to fit the arms in while attached to the glass it depends how big your hands/fingers are for the space allowed to get it in GOOD LUCK STEPHEN

Feb 04, 2015 | 2003 Lincoln Town Car

1 Answer

I was given a Optisan 900114 scope minus the starfinder lens, view lens and there seems to be a piece of glass missing on the scope. There is a broken knob. I would like to try to fix it myself but what I...

This scope is NOT worth repairing, as the repairs would be more expensive than just buying another telescope.

These can be found in good condition-- a small reflector on a EQ 1 mount for less than $50 on

Sep 22, 2011 | Barska Optics Barska AE10106 - 900114,...

2 Answers

Why do i see a blury target when i look thu the scope with myglasses and it is clear without them

Because your glasses (prescription or reading) are configured to correct your "far" sighted vision deficiency. Even though the scope is located at a very close distance to your eye, the point your scope is focusing to/at is many? yards in the distance. If you're like many of us, you can see satisfactorily at a distance, but your arms aren't long enough to allow you to read a magazine?

Nov 03, 2010 | Nikon Optics

1 Answer

3D doesn"t work

You will need a 3D-capable or 3D Ready tv. The difference is the 3D-capable tv will require you to buy a piece of equipment called an emitter to connect to it. The 3D Ready tv already has an emitter. You will also need a 3D bluray player or Playstation 3, 3D glasses, and hdmi version 1.4 cables. You will need 3D glasses and 3D bluray Dvds. If you want to watch something besides bluray dvds you would have to subscribe to direct tv as they are now offering some 3D broadcasting.

Jun 15, 2010 | Philips DVD724AT DVD Player

1 Answer

Swiss arms 4 x 40 reticle broken

I managed to fix a scope with a broke retical by replacing the wire with a piece of fine hair glued to the edges of the retical ring.

The scope must be disassembled taking care not to ruin the threads, scratch the glass, etc. It's easy to make a mistake and reverse the optics when reassembling, so take care to note the direction of the glass.

My retical was mounted on a metal ring, it was made of fine wire, and soldered onto the ring. I used a tiny drop of JB weld to glue the hair to the ring.

If I had to do it all over again, I would have looked for something finer than hair... And made a jig to clamp the hair before gluing.
(it took me several attempts to get it just right.)

Apr 19, 2009 | Optics

1 Answer


the original earthworm jim did NOT come out for PS1, it was only on these systems: Sega Mega Drive/Genesis, SNES, Sega Mega-CD, Game Boy, Sega Game Gear, PC, Sega Master System, Game Boy Advance, Virtual Console

Feb 06, 2009 | Take 2 Interactive Earthworm Jim 3D

1 Answer

Red and Blue shadowing (Where are my 3d glasses)

There are two convergence IC's that are bad and need to be replaced, as this happens to almost every rear projectionj set ever made. They are stand up IC's , on a heatsink and they start with STK. They are soldered into place and this set has no user replaceable parts inside of it. If you have no solid state repair experience, you really should call out a trained tech to assist you in this repair. A TV set is no place to be diggin and experimenting inside of.

Sep 24, 2006 | JVC AV-48WP30 48" Rear Projection...

Not finding what you are looking for?
Video Game Consoles & Games Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sega Video Game Consoles & Games Experts

Josh Whitehead
Josh Whitehead

Level 3 Expert

1148 Answers

Reggie brown

Level 3 Expert

424 Answers

Frank Zabroski
Frank Zabroski

Level 2 Expert

268 Answers

Are you a Sega Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides