Question about Kenmore 62602 Electric Dryer

2 Answers

Kenmore HE2 Dryer makes three beeps but wont start

I have a HE2 dryer by kenmore, there is power to the unit it lights up. the other night I did a ton of laundry, when i took the last load out I noticed that the light burnt out. Today I went to put a load of laundry in and turned it on then it wouldnt start, it only beeps three times, powers up and all. I tried unplugging it and repluging it in and flipped and checked the breaker. Could it not work because of the light? that sounds like it wouldnt be that but ive seen some crazeier things. any help would be appreciated we dont have the money to call a repair man and were out of warrently of course. Had I known other people had problems with his dryer I would have never bought it...

Kahuna240 here and I am having the same problem with my Elite Oasis dryer. I start the dryer and it runs a few minutes and shuts off. Then it comes back on and beeps 3 times. I have cleaned out the vents, the dryer, and the outside vent. I never get an error code and sometimes it runs longer than others. It is very warm inside when it stops (not excessive heat) but I wonder if this problem is thermal.

Posted by on

  • Anonymous Apr 05, 2008

    I have the same three beep no start problem my self . My nephew a new sears appliance repair man came over and with the help of a senior sears menter narrowed it down to the control electonics console, which I bought myself and installed. Plugged it in turned it on and guess what same thing.

    The part from a parts dealer cost me 134.00 dollars not returnable. Now i notice a click like a relay or something coming from the back,maybe a thermal thing like I read someone said. The dryer was about 20 days out of warranty when this happened.Sears would not help me at all.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check your door closer switch. Mine was doing the same and it turned out to be as easy as changing the switch.

Posted on Mar 27, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Kenmore Master
  • 2,651 Answers

Bad thermal fuse "located behind the lower access panel and then behind the vent discharge line , ck therefor a bad thermal fuse.

Posted on Mar 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sears Electric Dryer is flashing F01 What is wrong?


The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. If the code returns after plugging the washer back in, then the electronic machine control board will need to be replaced.
You can order a new control board from the Sears PartsDirect website.
http://www.searspartsdirect.com/partsdir...
Here's how to do it: http://media.fotki.com/1_p,wkwdftgtbkdgf...


Error code on dryer F01 - Kenmore Elite HE3 Dryer - iFixit

https://www.ifixit.com/.../Error+code+on+dryer+F01 Traduire cette page The F01 indicates a failed electronic machine control board. This error code can ... The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Dryer Sears / Kenmore HE3 - F01 Error Code Main Circuit ...

2q==? 7:35 https://www.youtube.com/watch?v=eWqrn5klxm0 20 avr. 2015 - Ajout? par Jim Dandy Sears Kenmore Dryer Model HE3 - F01 Error Code. Main Circuit Board Repair - Electronic Control Board ...

Error code F1 on Kenmore HE2 electric dryer appeared ...

www.shopyourway.com > ... > Questions Traduire cette page Sears Kenmore HE2 electric dryer; model #11087571601. F1 error message appeared ... Power it back up and see if you still get the F01 error code. If not, then I ...

What does the error code F-01 mean on my Kenmore front ...

www.shopyourway.com > ... > Questions Traduire cette page By unplugging and plugging in the electrical cord, I got the dryer to work again. ... What does the error code F-01 mean on my Kenmore front loaded HE2 dryer? ... My kenmore washing machine 110.46462500 is flashing an error code F.01 ...

Error code on dryer F01 - Kenmore Elite HE3 Dryer - iFixit

https://www.ifixit.com/.../Error+code+on+dryer+F01 Traduire cette page The F01 indicates a failed electronic machine control board. This error code can ... The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Dryer Sears / Kenmore HE3 - F01 Error Code Main Circuit ...

2q==? 7:35 https://www.youtube.com/watch?v=eWqrn5klxm0 20 avr. 2015 - Ajout? par Jim Dandy Sears Kenmore Dryer Model HE3 - F01 Error Code. Main Circuit Board Repair - Electronic Control Board ...

Error code F1 on Kenmore HE2 electric dryer appeared ...

www.shopyourway.com > ... > Questions Traduire cette page Sears Kenmore HE2 electric dryer; model #11087571601. F1 error message appeared ... Power it back up and see if you still get the F01 error code. If not, then I ...

What does the error code F-01 mean on my Kenmore front ...

www.shopyourway.com > ... > Questions Traduire cette page By unplugging and plugging in the electrical cord, I got the dryer to work again. ... What does the error code F-01 mean on my Kenmore front loaded HE2 dryer? ... My kenmore washing machine 110.46462500 is flashing an error code F.01 ...

Feb 04, 2016 | Sears Kenmore Elite Electric Dryer 69278

1 Answer

I have a kenmore he2 gas dryer,it wont turn on all as it does is beep and also when the door is closed the light still stays on,im thinking it is the door switch ,but want to confirm this first



Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor going bad...

Here are a couple of tips that I wrote will help you to figure out why your dryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101


May 02, 2011 | Dryers

1 Answer

Kenmore HE2 dryer will not start


the relay for the motor is probable stuck recommend service

Jun 03, 2010 | Kenmore 82822 Electric Dryer

2 Answers

Kenmore he2 electric dryer error code f-01


always unplug for 10 minutes and retry first.

Jun 12, 2009 | Kenmore 82822 Electric Dryer

1 Answer

Kenmore HE2 Dryer makes three beeps but wont start


It appears your thermal fuse has failed in this instance. After the machine begins to warm up - the fail thermally expands, and no longer makes contact.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 22, 2009 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

1 Answer

I HAVE A NEW (3 MONTHS) KENMORE HE2 ELECTRIC DRYER MODEL # 110.8756, IT APPEARS THAT I CAN TURN THE POWER ON, SET THE PARAMETERS BUT WHEN I PRESS START I JUST GET A BEEPING SOUND. THE LIGHT ON THE...


because is a 3 month old dryer is better for a technician to give you a diagnostic because can be a manufactory issue.
If you have any question please let me know.
Was this helpful?

Feb 17, 2009 | Kenmore 62602 Electric Dryer

4 Answers

Kenmore HE2 Dryer makes three beeps but wont start


The Kenmore HE2 model numbers 8757 and 8758 are the beepers. Everything comes on as normal. You press the start button and it beeps several times and then beeps again, again, and again. It will not start or turn at all. I did notice the drum light was blown. I have not replaced it yet, but could something so simple be the problem?
Ed G

Mar 23, 2008 | Dryers

6 Answers

Kenmore HE2 Dryer makes three beeps but wont start


What happens is that the door switch gets turned inside. I just took mine apart because of the same problems listed. The switch has a tab inside that has to make contact with the internal switch. I pulled mine apart and turned it so it made contact...put it back together and it works fine now. After doing all that it seems like you could turn the swith from the outside a quarter turn with a pair of pliers and accomplish the same thing.

Mar 22, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Kenmore 62602 Electric Dryer Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...