Question about Televison & Video

1 Answer

Television seems to be operating in NTSC

Bush LCD26TV005 television seems to be operating in NTSC mode and i cannot seem to find a way of changing this. In the manual install menu there are four system options (l,k,dk,bg) but the picture remains stubbornly B/W until i change the output format of my auxiliary source to NTSC whereupon i get a colour picture.

Posted by on

  • naespamhere Apr 26, 2010

    regret that we are not resident in the usa
    i am not sure why a tv intended for sale here should be set up this way
    the set is obviously intended for use here in the UK as it is designed for use on 240/50 electricity supply as opposed to the US 120 volt system

  • naespamhere Apr 29, 2010

    surely if the issue was with the y/c module the set would not give a colour image even when the source was ntsc ?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 321 Answers

Hi here in america it is always ntsc format
so you choose the ntsc input...
hope that help

Posted on Apr 24, 2010

  • Allan Savage Apr 26, 2010

    i am sorry for that i did not know that, i am in canada,

    and will like to help you to fix your problem;that's could

    come from the the y/c module , where that module control the

    the luminance and the color

    good luck and have a nice day..

  • Allan Savage Apr 29, 2010

    yes thats right ;/ but it must be a way in your menu

    to set your rf input in the good position/ if not the input you need is may be defect it should detect the signal automatically

    or its could the sync separator /may you should go to repair store

    theres is nothing i can do from here...

    sorry. have a nice day ,

    regards A.S



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Bush a642f tv stuck in standby mode suspect power supply capacitors but all seem ok

Press and hold the menu button on the t.v (not on the remote) for about a min, this should reset the processor to unlock it.

Aug 17, 2015 | Bush Televison & Video

1 Answer

Change ntsc to pal

The manual seems to indicate that the TV will automatically detect what signal type is present, so PAL should be recognized. There is, however the possibility that the "Color System" setting under the system menu may not be set to "AUTO", but NTSC. This would cause a conflict when detecting PAL input and affect picture. Check the "Color System" and either select PAL or AUTO and see if that helps.

Sep 18, 2014 | Televison & Video

1 Answer

Bush Furniture Segments Collection Swivel Video Base how to install guide

I was unable to find a manual online, however it does seem like their Customer Service is eager to help. Give them a call 800-950-4782

Apr 08, 2014 | Bush Furniture Cobra 36-inch Video Base

1 Answer

Bush tv dvd combi colour is not working on dvd setting


Sep 25, 2013 | Bush Televison & Video

1 Answer

Can't Program Channels In Philips 32HF7544D/27 LCD TV

Firmware update is necessary. It is corrupted.

Jan 22, 2009 | Televison & Video

1 Answer

No picture on Bush WS6667 TV

hello make sure the scart lead is connected tight

Jan 20, 2009 | Bush WS6671 28" TV

1 Answer

Repair to Bush LCD26TV005 TV


Try this site.

They supply spares to general public.


Jan 11, 2008 | Televison & Video

1 Answer

Mintek DTV-263 26in with No Color

please locate with your remote and change from NTSC to PAL or from PAL to NTSC while whatching cable

Jan 09, 2008 | Mintek DTV-263 26 in. LCD Television

2 Answers

Bush RF6694D TV (Service Mode)


I may be able to help you but I need to know the chassis number of your tv set.
This will be on the back of the set on the same label as the model number or if not there it will be on the main pcb.
It could start with AK, or PT.


Dec 14, 2007 | Televison & Video

2 Answers

VCR not working for some cassettes

What do you mean by "not able to play my VCR with some cassettes. " Is it that some tapes do not display images? No Video? From your name it seems that you are from India, Assuming that to be so, I also presume that you must be possesing a Multi-System VCR, to play back PAL Tapes from India, and NTSC tapes from the US. And if that is the case, I guess it is a simple problem of resetting the System standards. Please go to the Main menu of your VCR using the Remote, and select AUTO in System (You will be given choices of AUTO, PAL, NTSC 3.58, NTSC 4.43 and NTSC PB PAL. Likewise, it is entirely possible that your Television SYSTEm Standard has been accidentally changed. If it is Multi System TV, Then, again, using the Remote of the TV, select Menu, and then select AUTO in System. In all likelihood your problem should get solved.

May 13, 2007 | RCA VR605HF VHS VCR

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74482 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides