Question about Bosch Nexxt Premium WFMC6400UC Front Load Washer

Open Question

Bosch Nexxt 100 Series washer won't start--beeps and flashes

My Bosch Nexxt 100 Series washer beeps three times and flashes the spin, wash and finished lights simultaneously, but won't proceed with any cycle chosen. I had started a new load and the machine stated as normal (filling with water and drum rotating), but then I paused it to add a few more items (which I have done numerous times before). When I pressed start/pause again to restart the machine, the blinking and beeping behavior began. I tried unplugging the machine as a reset with no luck.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: beeping

Thanks! I found this online, which shows how to run tests on the washer to see what might be wrong, which helped, too. Now if i can just find a few muscly people to help me move the dryer from atop the washer.

http://forum.appliancepartspros.com/attachments/washer-repair/42d1194897506-error-code-01-wfk2401test.pdf
from this page:
http://forum.appliancepartspros.com/washer-repair/2385-error-code-01-a.html

Posted on Nov 26, 2007

Ad
Nitrotrike
  • 589 Answers

SOURCE: Bosch Nexxt 100 series washer wfmc1001uc

According to the manual, you have to:

1. Turn program selector to "off"
2. Turn selector to Drain or Spin
3. Press the start / pause

Wait until program ends.

Open door.

or

Press "start / pause" until the start / pause light flashes.

Posted on Jan 11, 2008

yalmer
  • 549 Answers

SOURCE: Bosch Nexxt premium front load washing machine

First try unplugging it and let it sit for 20 minutes.
Plug it back in and read what it is displaying then.

Posted on Feb 12, 2008

ginko
  • 19396 Answers

SOURCE: door won't open Bosch Nexxt 100 Series WFMC1001UC Front Load Washer

The door sensor/ lock is not working well

Posted on Mar 21, 2008

  • 223 Answers

SOURCE: Bosch Nexxt Premium WFMC6400UC does not start

A faulty module or timer/control panel. Unless you are getting some form of error code in the way of flashing lights or otherwise. In which case refer to manual. Good luck.

Posted on Sep 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch Nexxt 100 washer will not fill with water.


Does the problem occur on both hot and cold washes. If not then check the inlet solenoid . If yes than check the board.

Jan 25, 2014 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

The door is locked and the Finished/Spin and Wash Lights are all flashing alone with a beeping tone. This is in ALL wash modes except off.


my machine did that when stuck on spin cycie all i did was unpluged it for a few seconds and pluged it back in and it let me start all over again and open the door

Aug 31, 2013 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

I have a 2009 bosch 100 series washer that won't wash or spin, but will drain?


I realize that this post really old but I wanted this to be available for the next guy. I bought Bosch part number 154740 which are brushes that worked for me. They will tell you it wont work but it did for my Bosch (wfmc1001uc/09) washing machine.

Mar 06, 2012 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

My bosch 100 nexxt will not spin or complete a full cycle


does it spin and no pump, or pump and no spin or neither does it come to end of normal wash and stop before spinning.

Dec 21, 2011 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Bosch nexxt series 100 washer. washer willnot start three beeps and all the lights are on.


Hello,

Welcome to FixYa.

It sounds like a bad door latch/lock. It will require you to remove the front door seal spring to gain access to the part.


If this sounds like something you can repair I'll try and help in whatever manner I can or you may opt to call a pro.


Let me know how it goes and if you require further assistance. Thanks for choosing FixYa. Good luck

Regards,

Macmarkus :)

Feb 23, 2011 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Bosch Nexxt 100 series washer stops at 1st spin cycle


take a look at your manual that came with your machine go to problems usually at the back and see what that says,or go to the bosch website and type in your model number its on the inside of the door.i would suspect a program fault.adrian,,,,,

Jun 28, 2010 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Bosch Nexxt 100 series front load washer


You first of all need to check the pump filter.
This should be located at the botom front right of washer.
Look for a drop down flap or cover, once located, unscrew filter anti-clockwise to remove and clean.

The pump itself is directly behind the filter housing, check there is nothing stuck in the housing.
This should solve the prob.
Please leave feedback for my solution.
Thankyou.

Jan 11, 2010 | Bosch Nexxt 100 Series WFMC1001UC Front...

2 Answers

Washing machine does not spin


Nexxt 100 Series WFMC1001UC Front Load Washer This washing machine tutorial will show you what to do if the washing machine does not drain or empty the water out this repair was done on a Bosch, Neff and Siemens type appliance.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Feb 23, 2009 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Beeping on spin cycle


It is most likely out of balance, could be for many reasons.
1 could be too many heavy items such as jeans, towels, etc in one load.
2 could be the machine or floor is unlevel.
3 Could be a balance sensor needs replacing.

Mar 09, 2008 | Bosch Nexxt 100 Series WFMC1001UC Front...

3 Answers

Bosch Nexxt 100 Series washer


Look into your manual, clean outlet filter & refit. Machine will not spin out if filter is clogged.

Dec 21, 2007 | Washing Machines

Not finding what you are looking for?
Bosch Nexxt Premium WFMC6400UC Front Load Washer Logo

Related Topics:

318 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...