Question about D-Link AirPlus G DWL-G710 Wireless Range Extender

Open Question

DAP 1150 acess through laptop or iphone

I've already got a wap password for my DAP 1150
but its not letting me connect through my laptop or iphone; it only connects from the comp.
the modes on AP too
sorry but im sort of a beginner type

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
kornho
  • 781 Answers

SOURCE: i want to get a password in my dap-1150

when you say you want to get a password in your WAP I assume you want to enable security: there are 3 different ways to do it:

Enable WEP
(this is the most basic one and should be sufficient if you don't have a known hacker around your neighborhood and if you don't do transmit any critical information from your computer, ex. large and critical bank transactions.)

Step 1 Log into the web-basedconfiguration by opening up a web browser and typing in the IP addressof the access point (192.168.0.50).

Step 2 The default username is admin (all lower case) and the password is blank (nothing). Click OK.

Step 3 Click on the Home tab and then click Wireless on the left side.

Step 4 Click the Enabled radio button next to WEP.

Step 5 Next to WEP Encryption, select the level of encryption (64 or 128 bit).

Step 6 Next to Key Type, select HEX or ASCII. You will need to use the same key on all your wireless devices.

HEX - use 0-9 and A-F only.
ASCII - All numbers and letters.

Step 7 You can enter up to 4 different keys. Select the key you want to use by clicking on the corresponding radio button.

Step 8Enter your encryption key. You make this up yourself. If you selectedHEX, then enter a key made up of a combination of numbers (0-9) andletters (A-F). For example - A4572BCC19 (HEX).

Step 9 Click Apply to save settings.

Note:If you are configuring your access point from a wireless adapter, youwill lose connectivity as soon as you click Apply. You must enable WEPon your adapter and enter the same exact key as you entered on youraccess point.

Enable WPA-PSK (Passphrase) (this one is better than wep, this is the one currently suggested, it's not uncrackable but it's certainly harder than wep)
It is recommended to configure WPA-PSK on your wireless access point before your wireless network adapters.

Step 1Log into the web configuration of the DWL-G700AP by opening up a webbrowser and typing in the IP address of the Access Point(192.168.0.50).

Step 2 The default username is admin (all lower case) and the password is blank (nothing). Click OK.

Step 3 Click on the Home tab and then click Wireless on the left hand side.

Step 4 Next to Authentication select WPA-PSK using the radio buttons.

Step 5Enter a Passphrase. The passphrase or key is an alpha-numeric passwordbetween 8 and 63 characters long. It can include symbols (!?*&_)and spaces. Make sure you enter this key exactly the same on all otherwireless clients.

Step 6 Click on the Apply button then click on the Continue button to save your settings.

Make sure you enter the same exact WPA-PSK Passphrase on your wireless clients.

Enable WPA (RADIUS)
It is recommended to configure WPA on your wireless access point before your wireless network adapters.

Step 1Log into the web configuration of the DWL-G700AP by opening up a webbrowser and typing in the IP address of the Access Point(192.168.0.50).

Step 2 The default username is admin (all lower case) and the password is blank (nothing). Click OK.

Step 3 Click on the Home tab and then click Wireless on the left hand side.

Step 4 Next to Authentication select WPA using the radio buttons.

Step 5 Under 802.1X enter the IP Address, Port and Secret Key for RADIUS Server 1. Repeat for RADIUS Server 2 if applicable.

Step 6 Click Apply and then Continue to save the settings.

the following one is to make sure only those who know the name of your router (SSID) can access it. it's not setting up a password but it's another level of security

Disable SSID Broadcast
Step 1 Open your web browsersuch as Internet Explorer and enter the IP address of the DWL-G700AP inthe Address bar and press Enter. The default IP address is192.168.0.50.

Step 2 Enter your username (admin) and your password (leave blank by default). Click OK.

Step 3 Select the Advanced tab and then click Performance on the left side.

Step 4 Next to SSID Broadcast, select the Disabled radio button.

Step 5 Click Apply to save your settings.

the next one, as the one before. it's not a setting a password but to make sure only those network adapters you have or know can access your router, it's another level of security

MAC Address Filtering
Step 1 Open your web browserand type the IP address of the access point in the address bar. Thedefault IP address is 192.168.0.50. At the login, enter your username(admin) and password (default password is blank). Click OK

Step 2 Click the Advanced tab and then click Filters on the left side.

Step 3 In the section MAC Filters, select the radio button for the mode you would like to use.
Disabled - Disables this feature and will allow all wireless clients to connect.

Allow - Blocks all clients except for what you enter in the list.

Deny - Allows all clients except for what you enter in the list.

Step 4 Enter the Ethernet MAC address that you wish to Allow or Deny.

Step 5 Click Apply and then click Continue to save your settings.

Posted on Nov 17, 2009

Ad
Geekman
  • 32281 Answers

SOURCE: configuration dap 1150

You cannot configure the DLink by the URL address http://dlinkap?
You connect a LAN cable from your computer to the DLink.
Then open Internet Explorer and enter the URL http://192.168.0.1
the default login = admin
the PW is blank (just press Enter)
You can now configure the DLink.

Posted on Sep 28, 2009

Turk_97
  • 131 Answers

SOURCE: I have already installed my DAP-1150. Now how to

open your internet explorer and type into the address 192.168.0.1 then enter, A box will pop up, at this point either enter your password and username, or (if you have none yet) type Admin for user name and press enter. You can use the wizard to guide you thru the setup at this point. This will help you setup everything including your WEP security.

Hope this helps

Posted on Oct 06, 2009

Testimonial: "Thanks, I will try the same."

crashdr
  • 4 Answers

SOURCE: configuring DAP-1150

the dlinkap address is the netbios address to access the AP, if you happen to not have netbios enabled on your PC for the network adapter you are using to access the AP, then that address will not work.
The easiest option is probably to use the blue cable that comes with the AP and connect via ethernet to access the AP web interface rather than trying to do it via wireless, at least initially until you get the AP set up.
The default IP address for the AP is 192.168.0.50, so if you set the network adapter on your PC (ie. the one you are going to use to connect to the AP, most likely called "Local Area Connection" if you are using the blue cable) to an IP on the same subnet that isn't already used by another device on your network (for example, 192.168.0.51 - let me know if you'd like more clarification on how to perform this step) and then type into your browser: http://192.168.0.50
You will then be presented with the AP's web interface login screen, if this is the first time you are setting up one of these brand new, or freshly reset to factory defaults, then the username is (all lowercase): admin
...and the password is blank, just press enter or ok/login.

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I connect to my new WiFi using my dlink dap 1320 thru my Samsung tablet, how can I reset the old one


You need to get the Wireless Range Extender to communicate with your existing router. Instructions are attached. If you have already done this, you should be able to search for WiFi connections and connect to the SSID with your password. It should be the network that has the most strength. In Canada, you can contact Dlink at (800) 361-5265. In the US, (877) 453-5465.
http://www.dlink.com/-/media/Consumer_Products/DAP/DAP%201320/QIG/DAP%201320_QIG_US.pdf

Feb 03, 2015 | Samsung Tablets & eReaders

Tip

Various tips


tp.gifSOLUTION: Hold On/Off switch until it resets
tp.gifSOLUTION: Turn Off iPhone; Power it back up
tp.gifSOLUTION: : Reset TomTom One at least once, Sometimes several times to power up

SOLUTION
  • Ok... there is a trick to this. I set it up EXACTLY the same way with the AT&T option and the Cingular option. The only way it works is with the CINGULAR option.


tp.gif1.replace the APN isp.cingular with
tp.gif wap.cingular
tp.gif2.delete default username, type tp.gif WAP@CINGULARGPRS.COM
tp.gif3.delete default password, type
tp.gif CINGULAR1
tp.gif4.when the login script comes up it should look
tp.gif ike this (because you've already changed the APN)
tp.gif at+cgdcont=1,"IP","wap.cingular"
tp.gif5.Accept the automatic configuration for the IP & DNS

on Feb 07, 2010 | Cell Phones

1 Answer

How can I assign IP of my access point Dlink DAP-1150 on my lap top. I want to add adapter network DAP-1150 on my pc


there are 3 ways of setting it up as an Access Point, Wireless Client, Wireless Repeater mode. Would be easier if you explain what you want to use it as?

Choose what you want to use it as, you can set it up plugged into the router or over the wireless , so just plug it into your router and follow the instructions in the manual, you will then be able to unplug it and it will automatically connect to the router over the wifi. manual can be found here ftp://ftp.dlinkla.com/pub/drivers/DAP-1150/DAP-1150_A1_Manual_1.10%28B%29.pdf

Jul 12, 2014 | Samsung R540 Laptop

2 Answers

I configure a DAP-1150 and can connect via a laptop but my iphone and ipad fail to connect it. However, when I reset the DAP (with no security), the opposite happens! It means that my iphone and ipad can...


That is because your laptop has the saved connection history that you need to delete. Since your acces point does not have security which is not the same as the one that saved from your laptop. Therefore, your laptop won't be able to connect. Go to network and sharing center and from the left side of the page that came up look for change wireless adapter settings and click it. You will be able to see the connections that was saved and the top one would be your connection name. Delete that and close everything. Try connecting to your wireless network again and that should resolve the issue.

Feb 06, 2013 | D-Link DAP-1150 802.11g Wireless Access...

1 Answer

Can't connect iphone to dlink router


When my ipod tries to connect to my computer wirelessly, it asks for the password. I enter it, but it won't accept password. It finds the router ok, just says password is incorrect. I've checked and it's the right one. Any suggestions?

Nov 27, 2011 | D-Link DIR-615 Wireless Router

1 Answer

I cannot connect to the WIFI at work, but I can connect to my WIFI network at home, and other public networks. The wireless network at work is pushed by a D-Link 8200AP with a WAP security, just like it is...


Your laptop cannot connect to your work's wireless network because the security settings (ir WAP) in the D-Link is different to the security setting in your Netgear.
The wireless card in your laptop will need the settings changed to suit the D-Link's wireless settings ie the SSID and WAP.
You will need to change the wireless card settings in your laptop back to the Netgear's wireless settings to connect to your wireless network at home.
Some wireless cards allow you to set up different profiles for different wireless networks which allow you to switch wireless networks easily by just selecting the profile for the network you want to connect to.

Jun 25, 2011 | Apple iBook G3 Mac Notebook

2 Answers

I cannot configure the DLink DAP 1150 access point .As said in the manual When I put the user name and start it says that password is not valid.what is the solution?


Reset the device, unplug all network cable before power on (to turn off dhcp function). After that connect the network cablethe ip device should 192.168.0.50 and subnet mask 255.255.255.0. Set your computer ip address to 192.168.0.xxx where xxx is not 50. Access the device via your web browser, the login page should be apear. User : admin, password : leave it blank

Jan 06, 2010 | Computers & Internet

1 Answer

I have already installed my DAP-1150. Now how to make it security enabled?


open your internet explorer and type into the address 192.168.0.1 then enter, A box will pop up, at this point either enter your password and username, or (if you have none yet) type Admin for user name and press enter. You can use the wizard to guide you thru the setup at this point. This will help you setup everything including your WEP security.

Hope this helps

Oct 06, 2009 | D-Link AirPlus G DWL-G710 Wireless Range...

10 Answers

Configuring DAP-1150


address to access d-link DAP-1150
http://192.168.0.50

you have to make sure that your ip address is around 192.168.0.xx

Apr 25, 2009 | D-Link AirPlus G DWL-G710 Wireless Range...

Not finding what you are looking for?
D-Link AirPlus G DWL-G710 Wireless Range Extender Logo

Related Topics:

352 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...