Question about Hammering

2 Answers

What type of oil should I use in a Kango electric hammer type m(di) ? Is it possible to get a parts/service manual for this (I realise it is old. Thanking you in naticipation of a reply-Charlie

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 3 Answers

Assuming you have a Kango of the E Type vintage, I think the oil consistency is probably around the SAE 30 range with additives.
If someone could identify the base consistency of the oil used in the older Kango's, then an oil suitable for the Kango can be formulated and submitted on this website.
As for manual, I have a E Type manual booklet, the only mention is that Special Kango oil must be used.
Also see; February 11th. 2013 item on this website regarding Kango oil.

Posted on Jul 29, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,557 Answers

\charlie use sewing machine oil, as for a book on it put the make model into google and a pdf might be available as for parts not really unless you sroce them through the paper or ebay

Posted on Apr 24, 2010

Testimonial: "This infomation is "pointing" me in the right direction. Thanks"

  • 2 more comments 
  • srb60 Sep 20, 2010

    the old kango 900 and 950s use a mobile grease, tan in color. I have parts and service manual that I may be able to email you.

  • gicu1973 Oct 17, 2010

    hi, have you got pinions for them?

  • srb60 Oct 20, 2010

    Probably, I should at least have a good used one. However when I have had to replace the pinion I normally have to replace the ring gear. Either way you will need to reshim the ring gear or you will ruin them. send me an email.

  • Mark Apr 23, 2012

    Hi any chance that you've still got a copy of that manual? Cheers

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, im looking for spare parts fo a kango type m electric hammer no51877m its 50+ years old & i need the two springs, motor brushes & oil seal thenks steve powell


This is going to be tricky. Kango was bought out by Milwaukee tools and that model is not available. The springs you are going to need to measure with a caliper for length, width and diameter of the wire. Compression specs becomes an issue. http://www.leespring.com/browse_catalog.asp?springType=C&partNum=LHL*&xsearch=Search

The seal is the least of your worries because you can get sheet gasket material or use silicon gasket material in a tube. The brushes are another issue. https://www.repcoinc.com/brushes/

Jan 27, 2017 | Electric Hammering

2 Answers

Need diagram for kango 900 concrete hammer drill


Hi Vicki
Is it the old all silver one or the new one with the red motor housing?

May 19, 2012 | Milwaukee Tool Hammering

2 Answers

Need Parts List And Service Guide For Kango 990/950 Breaker


If these are the original Kango kangos then you are out of luck. They have been obsolete for many years now and no parts have been manufactured for a long time. The name was bought by DeWalt and they didn't do much with it. The Kango name is now ownd and used by Milwaukee, but there machines do differ alot from the originals. There were a few main models and the main mid sized breakers were the 900 (hammer only) and 950 (rotary hammer) There were a few facelift/variations of each (K, X and B I think) and they did use a couple of different sized seals/pistons/cylinders.
If it is one of the Milwaukee models you can look up diagrams here...
http://www.milwaukeetool.com/

Apr 24, 2012 | Hammering

3 Answers

I cant find kango oil for my kango electric hammer


What kango hammer do you have? I am most familiar with the UK kango 900 and 950, pre-milwaukee.

Sep 18, 2010 | Hammering

1 Answer

Kango 900 hammer:\r\nDon't know how to greace the


Milwaukee K900K or the English Kango 900K Blue old or Red some younger handle it differs very much English Kango was using a thick brown grease in 2 chrome colored plastic bags . the Milwaukee K900K has a lubrication grease also not oil but be aware of the operating hours i f you have a K900K model from Brand Milwaukee tools replace also a service kit and the bearings on the armature is important also Its neccesary to protect you from damage
if you have a English Kango its hard and expensive to get a spare parts and most times the tools are worn in the front of the chisel stroke bolds do not get right close and the piston pins are worn it was a good tool about 20 years ago i have serviced much of them . but the first thing thats important that its air-tight in front of the chisel and everywhere thats having a mechanic/pneumatic duty



Milwaukee Services and fill k900k with (IMPORTANT) the right number

Jun 05, 2010 | Electric Demolition Jackhammer

2 Answers

I need an schematic diagram for repair a kango demolition 900 bv where i get parts for it


they went out of business a few years ago,i have some parts no manual i need one also

Sep 23, 2009 | Dewalt D25330K 2KG Sds Plus Demolition...

4 Answers

Kango 900 demo hammer on off switch needs replacement were can i purchase parts.


what country are you in? in australia atlas copco are the distrbutors. i`m sure you can find out on the internet

Aug 11, 2009 | Hammering

1 Answer

Kango 950k


it sounds like it needs service,service is taking lower unit apart cleaning and regrease with special kango grease, if unit was serviced recently or not used much, grease could be real old and dry,sometimes you have to warm up unit before they start hitting correctly,,also if used a lot could be dirt build up,inside bit holder.remove bit holder clean out dirt regrease with heavy bearing grease,just grease the lower part,not very much grease is needed

Jul 28, 2009 | Electric Demolition Jackhammer

3 Answers

Is there any maintenance I can do on a Kango 950 Jack hammer


Ureythn GE00 is madr by Fuchs in Germany - see their website.
Darina is made by Shell - see internet for comparable grease

Apr 21, 2009 | Hammering

2 Answers

LOOKING FOR A MANUAL & INFO


Milwaukee now owns Kango, unfortunately I believe the 950sv is the old style. Parts are no longer avail. I have about 20 of the breakers. It is really too bad, they were great machines.

Jan 15, 2009 | Electric Demolition Jackhammer

Not finding what you are looking for?
Hammering Logo

Related Topics:

1,405 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hammering Experts

John Trevino

Level 3 Expert

1383 Answers

Steve

Level 3 Expert

3287 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1792 Answers

Are you a Hammering Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...