Question about Panasonic KX-TG6051M Cordless Phone

2 Answers

Panasonic KX-TG6051M 5.8 GHz -Caller ID view problem

I have a panasonic KX-TG6051M phone.The view CID option is not displayed in the main screen .How can i enable it

Posted by on

  • 1 more comment 
  • Anonymous Jul 10, 2008

    I have a panasonic KX-TG6051M phone.The view CID option is not displayed in the main screen .How can i enable it

  • Lucianeaoliv Aug 29, 2008

    I have a panasonic KX-TG6051M phone.The view CID option is not displayed in the main screen .How can i enable it ? Please I need a help...I stay on Brazil.

  • Anonymous Mar 14, 2014

    I see "mute" displayed on my screen. What is this and how do I delete it?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a panasonic KX-TG6051CM 5.8 phone with 3 handsets. After less than a year 2 of the 3 handsets developed the same problem, almost in the same time ( a couples of hours apart). The battery indicator shows low battery and is charging continuously even though the battery is fully charged ( when i swap the battery with my 3rd handset, the battery indicator shows fully charged and works fine ). The handsets were never dropped, never used in a moisture ladden environment ( like bathroom ) and when not in use they were kept in the charger. Any help or suggestions will be much appreciated.

Posted on Mar 24, 2008

  • syousaf78
    syousaf78 Aug 27, 2012

    I have a problem with my one set only. i switched batteries, but problem is still in one handset.Feel like handset problem, where can i get fix it, in Scranton PA18510 USA

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the exact same phone and so far I have no such problem with the view CID option....I (personally) found that it is better not to over charge the phone (i.e. leave it on the charger base) until battery indicator show that battery has run out...Then the phone will not have that many problems. Or, take it back to Panasonic and have them fixed it for you? Sometimes lemon exists...I am just lucky as I have dropped my phone many times on the floor and it still works ok. Good luck to you all...

Posted on Sep 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i set my Panasonic phone-extension to see caller ID


Let's see. Panasonic made 4 or 5 6x16 phone systems, and the ones that had CID required a card ending in part number -93. That and programming and CID service from the telco and you can have Caller Id.

Carl

Jul 17, 2012 | Panasonic KX-T7730 Corded Phone

1 Answer

The caller id is working but how to look back the last caller id number(or caller id log) on the KX-T7731, i am using it with the KX-TA824 system.


System pool is 300 numbers, personal is 20. There are logging and overwrite options in Maintenance programming 9.3 or system program 737 and 738. Then you program buttons for CID-Select and CID-Indication for either personal, system or both. (2 buttons per feature).

Carl

Sep 08, 2011 | Panasonic KX-T7731 Corded Phone

1 Answer

Is the KX-T7731 caller ID equipped?


The CID comes from a card with a part number ending in 93 as in 62493, 82493, 84893, etc. That and programming will display CID to Panasonic system display phones.

Carl

Feb 22, 2011 | Panasonic KX-T7731 Corded Phone

2 Answers

I installed a caller id card in my kx-ta624 panasonic system in my home. The manual I have describes kx-t7030 phones with a caller id indication button but my phones kx-t7730 do not have a button and so I...


You get to program it :-)

In the User's manual section 2-2 there's an alpabetic index for Caller-ID. It requires 2 buttons, a CID-Indicator and a CID-Select button. We usually put them as the top 2 buttons in a 773x series phone, but you'll have to pick 2 adjacent or similar CO buttons. You label them CID-I and CID-S. Then you program them for either 96 and 97 or 6 and 7. You also have to tell the programming that you are setting up the common CID if you use 96&7.

Carl

Dec 12, 2010 | Panasonic KX-T7730 Corded Phone

1 Answer

How to active caller id for panasonic kx-t7730?


Caller-ID is a function of the phone SYSTEM and requires 3 things, CID service from the phone company, a CID card ending in 93, and programming. It works on TD, TA and higher models.

Carl

Nov 28, 2010 | Panasonic KX-T7730 Corded Phone

1 Answer

My caller id is not showing name or number of the


Since CID display to the phone comes from the Panasonic phone SYSTEM, you might try looking inside the cabinet to see if it has a caller ID card. The part ends in 93.

It also requires some programming. If you post your model number, I might have a CID card if yours is missing.

Carl

Dec 04, 2009 | Panasonic KX-T7731 Corded Phone

1 Answer

Just plugged caller id box in to panasonic kxt7420


There is no such thing as correctly plugging an analog caller ID box into a digital phone line.

CID display comes from a TD-193 card mounted in the Key Service Unit and it only displays on Panasonic system display phones designed to work on a TD system. The only system that passes CID through to stations is a TA-824 and certain models of TDA-s that have special analog extension cards.

You can use the analog box, but you have to bring the line from in front of the system to the CID box.

Carl

Nov 11, 2009 | Panasonic KX-T7420 Corded Phone

2 Answers

Caller ID/CLIP) not working in Panasonic cordless


Well if the phone has been bought abroad and being used in India you will face this problem. this is because of the format of transmitting the caller id info being different. In USA it is STF and in India it is DTMF. You need a convertor in the phone line which is DTMF to STF. IF you find onw in Delhi pl let me also know.

Aug 19, 2009 | Panasonic KX-TH111S 2.4 GHz Cordless Phone

1 Answer

Panasonic kxtd816 with caller id card kxtd-193 problem kxt-7431


All Panasonic display phones, both analog and digital 7xxx series phones support CID. It requires 5 or 6 program adjustments as outlined in the manual. With luck, you may be able to just turn it on in 406, but your area code needs to be set if you have 7 digit local dialing, you need to tell the system if you want CID to adjust the clock daily, SMDR display, etc.

The 1232_PG lists all the steps. If you don't have a manual, you really need to get one. Post back and we'll see what we can do.

Carl


Dec 05, 2008 | Panasonic KX-T7431 Corded Phone

2 Answers

Can't display caller id info


Does CID work on ANY phone in the system? The reason I ask is because prior to issue 7, a Caller ID card had to be inserted into the trunk card. If yours is older, it may not have the card.

Carl

Aug 26, 2008 | Panasonic KX-T7453 Corded Phone

Not finding what you are looking for?
Panasonic KX-TG6051M Cordless Phone Logo

666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts

kakima

Level 3 Expert

96396 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...